Master Bond, Inc.
Hackensack, NJ 07601-3950
EP42HT-2FG: Food Grade Epoxy System
Master Bond EP42HT-2FG is a two part epoxy that fully meets stringent FDA CFR 175.300 and FDA CFR 175.105 food grade testing specifications. It also meets the toxicological requirements of the NSF/ANSI 51 (2009) Standard for Food Equipment Materials as defined in section 4.1. This low viscosity system offers convenient handling and can be used for a wide variety of applications in the food...
Read More »
EP3HTND-2Med Black Curing Epoxy meets USP Class VI standards.
Available in ½ pints, pints, quarts, gallons and 5 gallon containers, EP3HTND-2Med Black Curing Epoxy features 5,000-6,000 psi tensile strength. Having 1,600-1,800 psi tensile lap shear strength at room temperature, product bonds to glass, metals and ceramics. Used in -60°F to +400°F temperature, material provides resistance to sterilization methods such as chemical sterilants, EtO, radiation...
Read More »
Biocompatible, Non-Drip Epoxy Resists Repeated Sterilizations
Master Bond EP3HTND-2Med Black is a high strength, fast curing epoxy for use in the assembly of medical devices. It fully meets USP Class VI specifications. This one part system delivers superior resistance to a variety of sterilization methods such as chemical sterilants, EtO, radiation and especially autoclaving. As a one component system, EP3HTND-2Med Black does not require any mixing and...
Read More »
Thermally Conductive, High Temperature Resistant Epoxy Passes NASA Low Outgassing Tests
Certified to meet ASTM E595 NASA low outgassing standards, Master Bond EP46HT-2AO Black is well suited for the aerospace, electronic, opto-electronic industries and can be used vacuum environments. This two component system blends thermal stability with a high strength profile for a variety of bonding, sealing and encapsulation applications. EP46HT-2AO Black combines superior thermal conductivity...
Read More »
One Component Elastomeric System Features Excellent Thermal Conductivity
Master Bond X5TC is an elastomeric system that has a thermal conductivity of 10-12 BTU•in/ft2•hr•°F [1.44-1.73 W/m•K] while maintaining solid electrical insulation properties. This one part, no mix adhesive/sealant has a paste-like consistency and is very easy to use. It readily cures in 8-12 hours at room temperature or in 60-90 minutes at 150°F. X5TC bonds well to many substrates...
Read More »
Chemical Resistant, Two Part Epoxy Features Glass Transition Temperature of +240
Widely used in the electronic, aerospace, optical and specialty OEM industries, Master Bond EP126 excels in high temperature applications up to +600°F. This two component product features unique handling properties as Part A is a moderate viscosity liquid and Part B is a powder. It can be easily mixed using a forgiving 100 to 50 ratio by weight. The mixed system is a malleable paste, with an...
Read More »Electrically and Thermally Conductive, Two Part Silicone Meets NASA Low Outgassing Specifications
Well suited for use in vacuum environments, Master Bond MasterSil 973S-LO is an adhesive, sealant and coating that passes NASA low outgassing tests. This electrically conductive, two component silicone can be used in the aerospace, electronic, opto-electronic and specialty OEM industries. Featuring a low volume resistivity of 0.004 ohm-cm, MasterSil 973S-LO is a silver filled compound that has a...
Read More »Optically Clear, Room Temperature Curing Epoxy Blocks UV Light Transmission
Formulated for specific optical applications, Master Bond EP30-2LB blocks UV light from 200-400 nm and allows the transmission of visible light from 450-900 nm. This two part system is optically clear with a refractive index of 1.55. It also passes ASTM E595 testing to meet NASA low outgassing specifications. Beyond its optical properties, EP30-2LB is a reliable structural adhesive with a tensile...
Read More »
Two Part, Nickel Conductive Epoxy Meets NASA Low Outgassing Specifications
Featuring a nickel filler, Master Bond EP21TDCN-LO is an electrically conductive two component adhesive/sealant that is particularly effective for grounding, shielding and static dissipation applications. It is a toughened system and is capable of withstanding rigorous thermal cycling, mechanical vibration and shock. This system passes ASTM E595 tests for NASA low outgassing, making it well...
Read More »
Conductive Adhesive/Sealant passes NASA low outgassing tests.
Effective for grounding, shielding, and static dissipation, EP21TDCN-LO electrically conductive, 2-component adhesive/sealant features- nickel filler and passes ASTM E595 tests for NASA low outgassing. Chemical-resistant product bonds to similar and dissimilar substrates. Along with 5-10 ohm-cm resistivity and- 11 BTU•in/ft-²•hr•-°F thermal conductivity, properties include respective...
Read More »