MAPAL, Inc.

New solid carbide milling cutters from MAPAL Come with Four or Six Cutting Edges Options
Laboratory and Research Supplies and Equipment

New solid carbide milling cutters from MAPAL Come with Four or Six Cutting Edges Options

Available in two variants: OptiMill-3D-CR and OptiMill-3D-CS and are ideal for tool and mould making. Corner radius milling cutter OptiMill-3D-CR-Hardened is used for finishing 3D moulds up to a hardness of 66 HRC and has 4-12 mm diameter range. Circular radius milling cutters OptiMill-3D-CS are used in deep cavities mould making for complex free-form shapes as well as turbine blades and...

Read More »
Function Meets Design - Chucks from MAPAL Shine with a New Brilliance
Machinery & Machining Tools

Function Meets Design - Chucks from MAPAL Shine with a New Brilliance

 (Aalen, 30.08.19) - Since 1993, MAPAL has built up a broad portfolio in the area of clamping technology: from the clamping cartridge to the application-specific hydraulic chuck. The company is now announcing an entirely new appearance for these items. In this way not only will the complete range have a uniform appearance, additional potential with corresponding added value for the customer has...

Read More »
New Tritan-Drills fron MAPAL are Designed for Universal Use
Mechanical Components and Assemblies

New Tritan-Drills fron MAPAL are Designed for Universal Use

The Tritan-Drills are offered in four designs Tritan-Drill-Uni-Plus, Tritan-Drill-Alu, Tritan-Step-Drill-Steel. The Tritan-Drill-Uni-Plus is available in 4-20 mm diameter range in lengths of 5xD and 8xD. The Tritan-Drill-Alu comes with polished groove profile and special, sharp cutting edge preparation whereas the Tritan-Drill-Iron features wear-resistant coating and its corner radius design...

Read More »
Ball Nose Milling Cutters produce homokinetic joints.
Laboratory and Research Supplies and Equipment

Ball Nose Milling Cutters produce homokinetic joints.

Suited for production of homokinetic joints of hardened steel, CPMill Ball Nose Milling Cutters feature 5 cutting edges and highly spiraled geometry that ensures optimal chip removal. Solid carbide cutters for pre-machining come in variety of diameters featuring optimized base substrate and coating. For easy changing of milling heads, units are equipped with CFS interface. High concentricity of...

Read More »
Solid Carbide Milling Cutters work on lightweight materials.
Laboratory and Research Supplies and Equipment

Solid Carbide Milling Cutters work on lightweight materials.

For machining thermoplastics, OptiMill-Thermoplastic has sharpened cutting edges andÂ- chip discharge-optimized geometry. Diamond-coated OptiMill-Thermoplastic-FR, for machining fiber-reinforced thermoplastics, cuts fibers without burr formation. For milling fiber composite parts, OptiMill-Composite-UD diamond-coated end milling cutter eliminates delaminations and...

Read More »
Hydraulic Chuck features narrow contour.
Machinery & Machining Tools

Hydraulic Chuck features narrow contour.

Combining benefits of hydraulic expansion technology with 3° back taper, additively manufactured HighTorque Chuck features wide operating temperature range up to 170°C and balancing quality of G=2.5 at 25,000 rpm. Chuck is available in clamping diameters of 6, 8, 10, and 12 mm for HSK-A63 and SK-40. In addition, chuck is optionally available with dynamically balanced HSK, and is...

Read More »
Architectural & Civil Engineering Products

Toolholding System has design that reduces runout.

Head Fitting System (HFS) toolholder design increases tool life by up to 3X. Face contact added to taper connection provides longitudinal positioning accuracy equal to one-piece tools and concentricity and changeover accuracy is less than 3 microns. Design consists of head, holder, and differential screw. Tool can be changed without presetting or adjustments, and defined release force enables...

Read More »
New solid carbide milling cutters from MAPAL Come with Four or Six Cutting Edges Options
Laboratory and Research Supplies and Equipment

New solid carbide milling cutters from MAPAL Come with Four or Six Cutting Edges Options

Available in two variants: OptiMill-3D-CR and OptiMill-3D-CS and are ideal for tool and mould making. Corner radius milling cutter OptiMill-3D-CR-Hardened is used for finishing 3D moulds up to a hardness of 66 HRC and has 4-12 mm diameter range. Circular radius milling cutters OptiMill-3D-CS are used in deep cavities mould making for complex free-form shapes as well as turbine blades and...

Read More »
Function Meets Design - Chucks from MAPAL Shine with a New Brilliance
Machinery & Machining Tools

Function Meets Design - Chucks from MAPAL Shine with a New Brilliance

 (Aalen, 30.08.19) - Since 1993, MAPAL has built up a broad portfolio in the area of clamping technology: from the clamping cartridge to the application-specific hydraulic chuck. The company is now announcing an entirely new appearance for these items. In this way not only will the complete range have a uniform appearance, additional potential with corresponding added value for the customer has...

Read More »
New Tritan-Drills fron MAPAL are Designed for Universal Use
Mechanical Components and Assemblies

New Tritan-Drills fron MAPAL are Designed for Universal Use

The Tritan-Drills are offered in four designs Tritan-Drill-Uni-Plus, Tritan-Drill-Alu, Tritan-Step-Drill-Steel. The Tritan-Drill-Uni-Plus is available in 4-20 mm diameter range in lengths of 5xD and 8xD. The Tritan-Drill-Alu comes with polished groove profile and special, sharp cutting edge preparation whereas the Tritan-Drill-Iron features wear-resistant coating and its corner radius design...

Read More »
Ball Nose Milling Cutters produce homokinetic joints.
Laboratory and Research Supplies and Equipment

Ball Nose Milling Cutters produce homokinetic joints.

Suited for production of homokinetic joints of hardened steel, CPMill Ball Nose Milling Cutters feature 5 cutting edges and highly spiraled geometry that ensures optimal chip removal. Solid carbide cutters for pre-machining come in variety of diameters featuring optimized base substrate and coating. For easy changing of milling heads, units are equipped with CFS interface. High concentricity of...

Read More »
Solid Carbide Milling Cutters work on lightweight materials.
Laboratory and Research Supplies and Equipment

Solid Carbide Milling Cutters work on lightweight materials.

For machining thermoplastics, OptiMill-Thermoplastic has sharpened cutting edges andÂ- chip discharge-optimized geometry. Diamond-coated OptiMill-Thermoplastic-FR, for machining fiber-reinforced thermoplastics, cuts fibers without burr formation. For milling fiber composite parts, OptiMill-Composite-UD diamond-coated end milling cutter eliminates delaminations and...

Read More »
Hydraulic Chuck features narrow contour.
Machinery & Machining Tools

Hydraulic Chuck features narrow contour.

Combining benefits of hydraulic expansion technology with 3° back taper, additively manufactured HighTorque Chuck features wide operating temperature range up to 170°C and balancing quality of G=2.5 at 25,000 rpm. Chuck is available in clamping diameters of 6, 8, 10, and 12 mm for HSK-A63 and SK-40. In addition, chuck is optionally available with dynamically balanced HSK, and is...

Read More »
Architectural & Civil Engineering Products

Toolholding System has design that reduces runout.

Head Fitting System (HFS) toolholder design increases tool life by up to 3X. Face contact added to taper connection provides longitudinal positioning accuracy equal to one-piece tools and concentricity and changeover accuracy is less than 3 microns. Design consists of head, holder, and differential screw. Tool can be changed without presetting or adjustments, and defined release force enables...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers