IXYS Corp.

Construction Equipment and Supplies

IGBT Gate-Driver Hybrid provides plug-in solution.

Offered in 90 x 36 mm single-in-line package, 3-phase Model GDBD4410 incorporates noise-immune, pulse-transformer technology to transmit galvanic-isolated pulses to drive 6-pack IGBT inverter modules. Turnkey solution provides 7 gate-drive signals up to ±2 A peak per gate, noise immunity in dv/dt environments exceeding 50 kV/Â-µs, and outputs that provide on-chip generated negative...

Read More »
Electrical Equipment & Systems

Gate Driver IC has 30 ampere rating.

Able to source and sink 30 A of peak current, IXD_430 produces voltage rise and fall times of less than 30 ns. Internal cross conduction is eliminated through unit's source and sink output drive stages. With operating voltage range of up to 35 V, product has ability to disable output during fault conditions. IXDN430 is configured as non-inverting gate driver, IXDI430 is one inverting gate driver,...

Read More »
Electronic Components & Devices

Insulated Gate Bipolar Transistors suit UPS applications.

Rated from 16-60 A as discrete IGBTs or co-packs with internal fast recovery diode, C2-Class IGBTs have negative temperature dependence on saturation voltage. They are suited for off-line power conversion applications requiring 600 V devices with switching frequencies up to 200 kHz. Packaging options include TO-220, surface-mountable TO-263 and TO-268, TO-247, and PLUS247. Products are also...

Read More »
Electrical Equipment & Systems

Solid State Relay blocks voltages up to 800 V.

Model CPC1978J optically-coupled SSR has load current handling capability up to 10 A and offers low on resistance of 2.3 Ohms. It is packaged in i4-PAC(TM), which features silicon soft-soldered onto Direct Copper Bond substrate, providing 2,500 Vrms isolation from leads to backside of packages and enabling thermal resistance of 0.45 K/W from junction to heatsink. Applications include motor...

Read More »
Construction Equipment and Supplies

Half-Bridge Driver offers 6 A peak output drive current.

Model IX6R11 surface mount IC is optimized for high power, high frequency gate drive applications up to 650 V and 1 MHz. It drives large MOSFET and IGBT die sizes at higher frequency without need for additional discrete output transistors. Unit has 50 V/ns dV/dt noise immunity and 200 V negative voltage transient immunity. Chip enable signal is provided for controlled shutdown along with high and...

Read More »
Electronic Components & Devices

Schottky Diodes suit high-density power conversion applications.

Surface Mount Schottky Diodes offer voltage ratings of 40, 60, and 100 V. SMA products are rated for 1 A, while SMB products are rated for 2 A. Rectifiers with Schottky barriers are suited for power applications with high switching frequencies and requirements of low conduction losses, such as low voltage power supplies. Smaller device footprint, SMA and SMB cases enable designer to increase...

Read More »
Construction Equipment and Supplies

Driver Chipset suits applications up to 200 kHz and 575 V.

Model XBD4400 Half-Bridge Driver Chipset, consisting of 2 ICs and packaged miniature transformer, offers modular solution for MOSFET or IGBT-based power topologies. The 2 A peak current and heatsinkable, 16-pin SOIC-CT package allow operating temperature to 125°C. Unit features -5 V gate drive supply, 50 V/ns noise immunity, and latch-proof architecture. Interface Transformer provides 2500...

Read More »

Large Discrete Power MOSFET have low Rds(on).

PLUS264 HiPerFET(TM) series extends power of through-hole leaded parts useable with PCB assembly methods. Rated for 500, 550, 600, 800, and 1,000 V, series includes Model IXBF80N50Q, rated at 80 A with Rds(on) of 55 mohms and gate charge of 290 nanocoulombs, and Model IXFB38N100Q, rated at 38 A with Rds(on) of 260 mohms and gate charge of 230 nanocoulombs. Each part is rated for 890 W at case...

Read More »
Construction Equipment and Supplies

MOSFET/IGBT Drivers operate from 4.5 to 25 V.

Dual 2 Ampere IXD_402 and single 9 Ampere IXD_409 MOSFET/IGBT drivers are available with inverting or non-inverting configurations. IXDF402 can also be operated in differential mode. Voltage rating of 25 V makes them suitable for driving discrete IGBTs requiring 15 V gate bias. Both devices can be driven by TTL or CMOS input signals. Package options include standard 8-pin and 16-pin SOIC, 5-pin...

Read More »

All Topics