International Surface Preparation

Shot Blasting Systems prepare concrete and steel surfaces.
Cleaning Products & Equipment

Shot Blasting Systems prepare concrete and steel surfaces.

Version MK3 of Blastrac® 1-10D and 1-10D Super systems includes permanently attached umbilical power cord, analog gauge for blast load amps, urethane feed spout for access to blast wheel components, and slide-out screen for debris removal. Running on 230/460 V, 3-phase power, self-propelled systems clean and profile simultaneously. Each includes blast unit with 10 in. cleaning path and dust...

Read More »
Ride-On Shot Blaster has integral dust collection system.
Cleaning Products & Equipment

Ride-On Shot Blaster has integral dust collection system.

Powered by gas or liquid propane, Blastrac® GPX 16-65 strips, cleans, and profiles concrete or steel surfaces. Dust collection system uses compressed air pulse to clean 6 dust cartridges and does not draw power from product's 65 hp engine. This directs additional horsepower to blast wheel for increased shot flow. With 16 in. blast cleaning path and travel speed of up to 200 fpm, product...

Read More »
Shot Blasting System strips, cleans, and profiles in 1 pass.
Cleaning Products & Equipment

Shot Blasting System strips, cleans, and profiles in 1 pass.

With travel speed of 0-350 fpm and 48 in. blast pattern, Blastrac® 2-4800DH strips, cleans, and profiles up to 30,000 ftÂ-² of concrete or 7,500 ft² of steel per hour. Machine is powered by 350 hp diesel engine and uses twin centrifugal blast wheels to propel blast media in controlled pattern and direction. Media is recycled for reuse, while onboard 3,500 cfm dust collector...

Read More »
Spinner Hanger cleans odd-shaped work pieces.

Spinner Hanger cleans odd-shaped work pieces.

Trublast® Spinner Hanger provides deflashing, descaling, peening, profiling, and surface cleaning of parts that can not be adapted to table or tumble machines. Parts rotate at 22 rpm during blast cycle and are cleaned from multiple angles. Unit supports max load weight of 500 lb/hook and max work envelope of 24 in. dia x 24 in. high. After being thrown by wheel, abrasive media is returned...

Read More »

Abrasive Blast Machine cleans die castings off-line.

Wheelabrator® Rotary Mesh Table Machine has 3/8 in. thick, manganese steel blast chamber and multiple vestibule seals for abrasive containment. Castings are loaded onto 20 in. wide wire mesh table and rotated through blast on 48 in. pass line, exposing parts to top and bottom-mounted blast wheels. Four bi-directional, alloy blast wheels are single sided with twelve 2Â-½ in. wide blades...

Read More »

Robot Gripper Machine provides controlled blasting.

Wheelabrator® Robot Gripper Machine features fully automatic movement of workpieces through 6-axis, flexible-arm robot. With dust-free and dirt-tight connectable sleeve, robot can move workpieces individually from outside into work area and through blast stream. Universal gripping system is adjusted through touch screens and joystick for fine-tuning. Machine facilitates multiple finishes or...

Read More »
Abrasive Blast Cleaner processes small parts.
Health, Medical, & Dental Supplies and Equipment

Abrasive Blast Cleaner processes small parts.

Wheelabrator® Barrel Blaster consist of 13Â-½ in. diameter, 12 bladed wheel unit, powered by 15 hp, 3,600 rpm, NEMA T-frame, direct mounted motor. Barrel is 32 in. diameter and 37 in. deep, providing 3 ft³ tumbling capacity for up to 600 lb. Adjustable, pneumatically-operated butterfly valve allows for positive media flow control. System provides contaminant removal, peening,...

Read More »
Shot Blasting Systems prepare concrete and steel surfaces.
Cleaning Products & Equipment

Shot Blasting Systems prepare concrete and steel surfaces.

Version MK3 of Blastrac® 1-10D and 1-10D Super systems includes permanently attached umbilical power cord, analog gauge for blast load amps, urethane feed spout for access to blast wheel components, and slide-out screen for debris removal. Running on 230/460 V, 3-phase power, self-propelled systems clean and profile simultaneously. Each includes blast unit with 10 in. cleaning path and dust...

Read More »
Ride-On Shot Blaster has integral dust collection system.
Cleaning Products & Equipment

Ride-On Shot Blaster has integral dust collection system.

Powered by gas or liquid propane, Blastrac® GPX 16-65 strips, cleans, and profiles concrete or steel surfaces. Dust collection system uses compressed air pulse to clean 6 dust cartridges and does not draw power from product's 65 hp engine. This directs additional horsepower to blast wheel for increased shot flow. With 16 in. blast cleaning path and travel speed of up to 200 fpm, product...

Read More »
Shot Blasting System strips, cleans, and profiles in 1 pass.
Cleaning Products & Equipment

Shot Blasting System strips, cleans, and profiles in 1 pass.

With travel speed of 0-350 fpm and 48 in. blast pattern, Blastrac® 2-4800DH strips, cleans, and profiles up to 30,000 ftÂ-² of concrete or 7,500 ft² of steel per hour. Machine is powered by 350 hp diesel engine and uses twin centrifugal blast wheels to propel blast media in controlled pattern and direction. Media is recycled for reuse, while onboard 3,500 cfm dust collector...

Read More »
Spinner Hanger cleans odd-shaped work pieces.

Spinner Hanger cleans odd-shaped work pieces.

Trublast® Spinner Hanger provides deflashing, descaling, peening, profiling, and surface cleaning of parts that can not be adapted to table or tumble machines. Parts rotate at 22 rpm during blast cycle and are cleaned from multiple angles. Unit supports max load weight of 500 lb/hook and max work envelope of 24 in. dia x 24 in. high. After being thrown by wheel, abrasive media is returned...

Read More »

Abrasive Blast Machine cleans die castings off-line.

Wheelabrator® Rotary Mesh Table Machine has 3/8 in. thick, manganese steel blast chamber and multiple vestibule seals for abrasive containment. Castings are loaded onto 20 in. wide wire mesh table and rotated through blast on 48 in. pass line, exposing parts to top and bottom-mounted blast wheels. Four bi-directional, alloy blast wheels are single sided with twelve 2Â-½ in. wide blades...

Read More »

Robot Gripper Machine provides controlled blasting.

Wheelabrator® Robot Gripper Machine features fully automatic movement of workpieces through 6-axis, flexible-arm robot. With dust-free and dirt-tight connectable sleeve, robot can move workpieces individually from outside into work area and through blast stream. Universal gripping system is adjusted through touch screens and joystick for fine-tuning. Machine facilitates multiple finishes or...

Read More »
Abrasive Blast Cleaner processes small parts.
Health, Medical, & Dental Supplies and Equipment

Abrasive Blast Cleaner processes small parts.

Wheelabrator® Barrel Blaster consist of 13Â-½ in. diameter, 12 bladed wheel unit, powered by 15 hp, 3,600 rpm, NEMA T-frame, direct mounted motor. Barrel is 32 in. diameter and 37 in. deep, providing 3 ft³ tumbling capacity for up to 600 lb. Adjustable, pneumatically-operated butterfly valve allows for positive media flow control. System provides contaminant removal, peening,...

Read More »

All Topics