Maxim Integrated

Construction Equipment and Supplies

LED Driver enables drop-in replacements for halogen MR16 lamps.

Enabling design of retrofit LED lamps that can replace halogen MR16s without any changes to existing electrical infrastructure, MAX16840 employs architecture that ensures flicker-free, dimmable operation with electronic transformers and cut-angle dimmers. Product can also be designed without electrolytic capacitors, extending lifetime of LED lamp, and delivers up to 20 W of power. It is specified...

Read More »
Agricultural & Farming Products

SFP+ Optical Module Controller has digital laser diode driver interface.

Model DS1878 SFP+ controller features digital laser diode driver interface, for communication with laser driver/limiting amplifier. Laser modulation is controlled with temperature-driven lookup table, and 2 additional 9-bit delta-sigma DAC outputs with 36-entry LUTs are provided. Operating in temperatures from -40 to +95°C, pluggable I2C controller monitors 6 analog channels: temperature,...

Read More »
Communication Systems & Equipment

Class D Amplifier offers optimized EMI performance.

Housed in 0.3 mm pitch, 9-bump WLP measuring 1 x 1 mm, MAX98304 provides output power to 3.2 W with 10 Â-µVrms noise. Patented EMI-reduction techniques and circuit design eliminate need for output filtering. Since no filtering components of any kind are required with speaker cable or trace lengths of 24 in. and beyond, MAX98304 saves board space. Fully specified over -40 to +85°C...

Read More »
Electrical Equipment & Systems

Low-Power DACs prolong battery life in portable applications.

Suited for portable applications, 2-wire sensors, and motor control in robotics, 14-bit MAX5214 and 16-bit MAX5216 are DACs with respective accuracies of ±0.25 and ±1 LSB INL that consume 80 Â-µA max in operation mode and 0.4 µA in power-down mode. Programmable, single-channel solutions, supplied in 8-pin uMAX® package and rated for -40 to +105°C operation,...

Read More »
Expandable IF Switch IC allows up to16 satellite signals.
Electrical Equipment & Systems

Expandable IF Switch IC allows up to16 satellite signals.

Suited for satellite IF distribution and multiswitch applications, 8 x 4 Model MAX12005 supports single, quad low-noise block with vertical or horizontal polarization signals that can be matrix-switched to 4 satellite receivers. Two control methods, DiSEqC(TM) 2.0 decoding and tone/voltage decoding, enable 4 operational modes, which include LNB mode, cascade master mode, cascade slave mode, and...

Read More »
Electrical Equipment & Systems

USB Battery Charger IC incorporates identification circuit.

Model MAX14566E supports charging of portable devices from notebook computers, even when computer is in sleep or hibernate mode. Requiring no external software, circuit allows host USB port to support USB Battery Charging Specification, Revision 1.1-compliant devices with shorted D+/D- detection, as well as Apple® devices by using resistor bias. Unit is able to identify type of portable...

Read More »
Controls & Controllers

Switching Regulator integrates MOSFETs to minimize EMI.

Housed in 2 x 2 mm package, 3.3 V Model MAX15040 operates from fixed 1 MHz switching frequency. Synchronous DC-DC step-down regulator offers efficiencies up to 94% at full load current of 4 A, minimizing power loss in applications such as telecom, networking, and server equipment. Providing ±1% output voltage accuracy, regulator is fully specified over -40 to +85°C temperature range....

Read More »
Low-Noise Amplifiers improve GPS receiver performance.
Communication Systems & Equipment

Low-Noise Amplifiers improve GPS receiver performance.

Featuring 0.65 dB noise figure that extends receiver sensitivity and read range, MAX2667/MAX2669 are fully integrated GPS/GNSS LNAs suited for battery-powered, handheld devices. With different linearity options to suit system requirements, LNAs have optional logic-enabled shutdown mode that reduces supply current to less than 1 Â-µA when not in use. Rated to 4.5 dBm, MAX2669 fosters higher...

Read More »
Electrical Equipment & Systems

Two-Channel I2C ADC includes 2.048 V internal reference.

Housed in 1.9 x 2.2 mm WLP, 12-bit Model MAX11645 operates from 2.7-3.6 V supply and is capable of sample rates up to 94 ksps. Device offers up to 70 dB SINAD, ±1 LSB INL and DNL error, and 0.3 ppm/°C gain-error temperature drift. With 18 Â-µW power dissipation at 1 ms conversion times, ADC is suited for energy-harvesting sensors, portable consumer electronics, and POL monitoring...

Read More »
Communication Systems & Equipment

Variable-Gain Amplifier supports 25 ns digital switching.

Incorporating 9 circuit functions, dual-channel Model MAX2062 can serve as IF or RF VGA, interfacing directly with 50 W systems operating over 50-1,000 MHz frequency range. Unit provides rapid-fire gain selection for 4 customized attenuation states per path. In typical configuration, cascade yields total gain range of 64 dB, max gain of 19.4 dB, and noise figure of 7.3 dB. Dedicated 8-bit control...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers