Apollo Valves
Matthews, NC 28105
Share:
Lockout prevents accidents/injuries during servicing.
ApolloÃ-® OSHA-compliant lockout device protects workers from accidents and injuries during servicing and maintenance of actuator-controlled valves. Available in 6 sizes, it features top and bottom ISO 5211-style tapping to facilitate mounting between actuator and valve. Product, constructed with cast 316 stainless steel and 300 Series stainless steel, locks automated valve into fully open or...
Read More »Multi-Valve Test Kits test backflow-prevention devices.
Test kits, made with corrosion-resistant materials, are rated for pressures to 200 psig and temperatures to 150Ã-
Read More »Backflow Preventers protect water systems.
Model RP reduced pressure principle assemblies are designed for use in high- and low-hazard systems. Designed for low head loss, units are available in sizes from 2Ã-½-10 in. Models offer corrosion-resistant construction, internal sensing passage, and module check assemblies. Diaphragm and sensing passage are built into all-bronze relief valve body. Max working pressure is 175 psig and rated...
Read More »Double Check Detector Assemblies detect unauthorized use.
Sized from 2Ã-½-10 inches, DCDA units protect against cross-connection of non-hazardous water into safe drinking water systems. Able to monitor water leakage, they have FDA-approved epoxy coated ductile iron body and bronze by-pass, which houses water meter and double check valve assembly. Max working pressure is 175 psig, and operating range is 33-140Ã-
Read More »Double Check Valve Assemblies suit commercial applications.
Modular, in-line repairable Model DC valve assemblies are available in sizes from 2Ã-½-10 in. Units guard against back-pressure or back-siphonage caused by cross connections between potable water lines and substances that are objectionable but not hazardous. Assemblies offer 175 psig max working pressure and operating temperature range of 33-140Ã-
Read More »Spill-Resistant Vacuum Breaker prevents cross-connections.
Suited for continuous pressure, indoor applications where water spillage is undesirable, Series 4W-500 valve prevents back-siphonage. It is available in Ã-¼, 3/8, and Ã-½ in. sizes with straight-through flow path, corrosion-resistant NorylÃ-® body, silicone rubber discs, and stainless steel springs and fasteners. Integral shut-off valves and Ã-¼ in. flare test connection are...
Read More »Apollo-® Valves Earns ISO/IEC 17025:2005 Accreditation for Engineering Laboratory
ApolloÃ-® Valves has earned ISO/IEC 17025:2005 accreditation for its engineering laboratory in Pageland, S.C. ApolloÃ-® is the first U.S. valve manufacturer to meet this standard, which many consider to be among the industry's most important for engineering test facilities. The Apollo Valves gage calibration laboratory, also located in Pageland, is ISO/IEC 17025:2005 accredited, as well....
Read More »Concern about Environment Leads Conbraco Industries to Join Green Mechanical Council
MATTHEWS, N.C. - Conbraco Industries, producer of ApolloÃ-® ball valves and other flow control products, is showing support for industry-promoted greener construction practices by joining the Green Mechanical Council. Also known as GreenMech, the Wisconsin-based not-for-profit organization welcomes manufacturers, labor unions, contractors, consultants, educators and others devoted to the use...
Read More »Commitment to Quality Leads to New Two-Year Warranty on Full Apollo-® Line
MATTHEWS, N.C. - Officials at Conbraco Industries announced today they have extended the warranty period for the company's complete line of U.S.-made ApolloÃ-® valves and accessory products to a full two years. The doubling of its long-standing one-year warranty reflects the company's confidence in its in-house quality assurance programs and the total control it exercises over Apollo valve...
Read More »Lockout prevents accidents/injuries during servicing.
ApolloÃ-® OSHA-compliant lockout device protects workers from accidents and injuries during servicing and maintenance of actuator-controlled valves. Available in 6 sizes, it features top and bottom ISO 5211-style tapping to facilitate mounting between actuator and valve. Product, constructed with cast 316 stainless steel and 300 Series stainless steel, locks automated valve into fully open or...
Read More »Multi-Valve Test Kits test backflow-prevention devices.
Test kits, made with corrosion-resistant materials, are rated for pressures to 200 psig and temperatures to 150Ã-
Read More »Backflow Preventers protect water systems.
Model RP reduced pressure principle assemblies are designed for use in high- and low-hazard systems. Designed for low head loss, units are available in sizes from 2Ã-½-10 in. Models offer corrosion-resistant construction, internal sensing passage, and module check assemblies. Diaphragm and sensing passage are built into all-bronze relief valve body. Max working pressure is 175 psig and rated...
Read More »Double Check Detector Assemblies detect unauthorized use.
Sized from 2Ã-½-10 inches, DCDA units protect against cross-connection of non-hazardous water into safe drinking water systems. Able to monitor water leakage, they have FDA-approved epoxy coated ductile iron body and bronze by-pass, which houses water meter and double check valve assembly. Max working pressure is 175 psig, and operating range is 33-140Ã-
Read More »Double Check Valve Assemblies suit commercial applications.
Modular, in-line repairable Model DC valve assemblies are available in sizes from 2Ã-½-10 in. Units guard against back-pressure or back-siphonage caused by cross connections between potable water lines and substances that are objectionable but not hazardous. Assemblies offer 175 psig max working pressure and operating temperature range of 33-140Ã-
Read More »Spill-Resistant Vacuum Breaker prevents cross-connections.
Suited for continuous pressure, indoor applications where water spillage is undesirable, Series 4W-500 valve prevents back-siphonage. It is available in Ã-¼, 3/8, and Ã-½ in. sizes with straight-through flow path, corrosion-resistant NorylÃ-® body, silicone rubber discs, and stainless steel springs and fasteners. Integral shut-off valves and Ã-¼ in. flare test connection are...
Read More »