Dymax Corp.

Temporary Masking Resins Allow Immediate Processing of Surgical Instruments And Orthopedic Implants
Adhesives & Sealants

Temporary Masking Resins Allow Immediate Processing of Surgical Instruments And Orthopedic Implants

Called the SpeedMask ® 7100 Series, a new line of temporary metal masking resins is offered by the DYMAX Corporation. These temporary masks offer reliable surface protection for orthopedic implants, implant hardware, surgical instruments and medical devices. These masking resins cure in seconds using UV light. Multiple viscosity ranges simplify dispensing and reduce mask application to a...

Read More »
New Adhesive Creates Excellent Bonds to Acrylic, Plastics And Glass In Seconds
Adhesives & Sealants

New Adhesive Creates Excellent Bonds to Acrylic, Plastics And Glass In Seconds

August 1, 2005 DYMAX® Ultra Light-Weld® 3099, a new adhesive for acrylic, glass and polycarbonate assembly, exhibits a wide range of high performance properties including high tensile strength and clarity, 95% elongation at break, thermal cycling, and good moisture resistance. DYMAX 3099 is ideal for automotive glass and plastic assembly, bonding trophies, acrylic furniture, display cases,...

Read More »
UV Adhesive Enables Packagers To Replace PVC With PET, RPET And A-PET -Providing An Environmentally Favorable Alternative For Clamshell And Blister Packages
Adhesives & Sealants

UV Adhesive Enables Packagers To Replace PVC With PET, RPET And A-PET -Providing An Environmentally Favorable Alternative For Clamshell And Blister Packages

Torrington, CT: Packagers and major retailers, responding to consumer protest against using toxic PVC materials, are seeking cost-efficient UV adhesive solutions from DYMAX Corporation to develop safer, affordable PVC-alternative packaging alternatives. DYMAX Ultra Light-Weld 3083 adhesive provides an economical, fast, heat-free and solvent-free structural seal that easily and securely bonds...

Read More »
Conveyors provide high-speed UV light curing.
Material Handling & Storage

Conveyors provide high-speed UV light curing.

Suited for curing UV resins, adhesives, sealants, and coatings, Series UVCS can be equipped with up to 4 DYMAX 5000-EC lamps or up to 2 FUSION® F300S lamps, for 6 or 12 in. wide curing. Running at speeds from 1-80 fpm, conveyors offer complete shielding and are equipped with exhaust fan and stack to minimize part temperature. Integral vacuum hold-down and cooling system assures parts stay...

Read More »
Adhesive bonds glass and metal in seconds.
Adhesives & Sealants

Adhesive bonds glass and metal in seconds.

Multi-Cure® 605 Series, suited for glass and glass-to-metal assembly, produces invisible bonds and exhibits resistance to moisture and thermal cycling. Capable of forming acceptable bonds on irregular surfaces, adhesives can fill irregularities in bonded joints and cure through thickness of Â-¼ in. within seconds when exposed to 365 nm UV light. Multi-Cure® feature enables...

Read More »
UV/Visible Sealants bond to PVC, PET, and R-PET plastics.
Adhesives & Sealants

UV/Visible Sealants bond to PVC, PET, and R-PET plastics.

Intended for thermoformed plastic clamshell and tube packaging, Light-Weld® 3081 and 3082 Sealants cure upon exposure to UV light in seconds, allowing production line speeds up to 30 fpm. Products create crystal clear bonds and eliminate marking or discoloration that can occur with heat sealing RF or sonic welding. Solvent- and ODC-free, each adhesive comes in standard and thick viscosity...

Read More »
Acrylic Adhesive bonds needles and syringes.
Adhesives & Sealants

Acrylic Adhesive bonds needles and syringes.

MD® Medical Device Adhesive 1193-M-VLV is low viscosity for quick, air-free dispensing into needle hub cavities. It bonds stainless steel cannula to polycarbonate, PVC, and polypropylene hubs. Product cures in fraction of a second when exposed to high intensity UV light. It produces clear bonds with minimal variation in tensile strength values. For in-line inspection, MD 1193-M-VLV contains...

Read More »
Adhesive bonds plastics in seconds without crazing.
Adhesives & Sealants

Adhesive bonds plastics in seconds without crazing.

UV/visible light curing Ultra Light-Weld® 3094 Series forms clear bonds and does not cause crazing or blooming on plastics. Bonds have gap filling capability and maintain strength through thermal cycling as well as shock, vibration, and impact. Material, available in viscosities of 1,000 cp, 8,000 cp, and 25,000 cp non-flowing gel, cures upon exposure to wavelengths ranging from 300-500 nm....

Read More »
Potting Compound dispenses from disposable static mixers.
Adhesives & Sealants

Potting Compound dispenses from disposable static mixers.

Following dispensing, Trigger Cure(TM) 9-20675 A/B 2-part potting compound forms Â-¼ in., UV-cured layer on top in 20 seconds or less that provides protection and integrity to surface. Interior gels within 15-20 minutes at room temperature to depths of 1 in. or more. Optimum properties are achieved in 48 hours at room temperature. With no exotherm, soft, rubbery encapsulant protects and...

Read More »
Adhesives bond magnets, speakers, and electrical wiring.
Adhesives & Sealants

Adhesives bond magnets, speakers, and electrical wiring.

Suited for cold bonding close fitting, opaque substrates to steel housings, 800 Series adhesives cure with activator for interfacial bonding in 30-60 sec and exhibit gap filling capabilities and thermal shock resistance. Multi-Cure 600 Series adhesives, offered in 4 types, cure on surfaces in as little as 10 sec when exposed to UV light. Uses include wire tacking, strain relief, and seam sealing.

Read More »

All Topics