Dymax Corp.

LED-Based Curing System offers cool, consistent UV curing.
Material Processing

LED-Based Curing System offers cool, consistent UV curing.

Handheld LED curing system, HH-LED+, uses LEDs to generate UV and visible light from 375-415 nm. Featuring no reduction in intensity for over 5,000 hr, product does not emit IR or other unused wavelengths. It delivers over 350 mW/cmÂ-² of curing power and incorporates instant on/off and integral timer features as well as 12 mm lightguide. Solution is suited for spot-curing adhesives in...

Read More »
Adhesives & Sealants

Light Curing Adhesive bonds plastic and metal substrates.

Suited for medical devices, DYMAX MD® 1161-M provides single solution for bonding various combinations of dissimilar substrates such as polycarbonate, acrylic, nylon, stainless steel, PVC, and polyurethane. Product cures in seconds upon exposure to UV/visible light, and fluoresces under low-intensity black light for immediate in-line functional testing and inspection.

Read More »
Adhesives provide bubble-free laminating for LCDs.
Adhesives & Sealants

Adhesives provide bubble-free laminating for LCDs.

Formulated for applications where clear, invisible bonds are required, LCD Adhesives resist yellowing, allowing for optimal light transmission. With UV light, solvent-free products bond in seconds to variety of substrates including polycarbonate, glass, CAB, acrylic Phenolic, PET, and ITO. On demand cure means substrates can be repositioned precisely until parts are ready to be cured. Minimized...

Read More »
UV Curing Spot Lamp includes intensity adjustment feature.
Architectural & Civil Engineering Products

UV Curing Spot Lamp includes intensity adjustment feature.

Emitting UVA and blue visible light from 300-450 nm, BlueWave(TM) 200 cures adhesives, coatings, and encapsulants. Intensity Adjustment feature allows manual adjustment during initial UV process validation and production and permits engineers to evaluate full range of intensity produced by lamp from 0-100%. Integral shutter can be actuated by foot pedal or PLC, making lamp suitable for manual and...

Read More »
Radiometer measures UV intensity of spots/floods/conveyors.
Test & Measurement

Radiometer measures UV intensity of spots/floods/conveyors.

Used to validate and monitor UV curing process, ACCU-CAL(TM) 50 performs repeatable measurements in UVA spectrum (320-395 nm) from 1 mW/cmÂ-² to 40.0 W/cm². It can also confirm that UV curing process complies with ACGIH safety guidelines for UV exposure. Featuring 12 month calibration period and photo-sensor assembly that protects against high temperatures, unit measures UV intensity...

Read More »
UV Curing Spot Lamp suits manual and automated processes.
Architectural & Civil Engineering Products

UV Curing Spot Lamp suits manual and automated processes.

Designed for UV curing of adhesives, coatings, and encapsulants, BlueWave(TM) 50 AS emits over 3,000 mW/cmÂ-² of primarily UVA and blue visible light (300-450 nm). Bulbs are rated for 2,000 hr, but can last as long as 4,000 hr. Integral Cool Blue(TM) Filter minimizes shortwave UV and IR transmission, protecting liquid-filled lightguides and producing cooler cures. Other features include...

Read More »
Masking Material protects metal component surfaces.
Adhesives & Sealants

Masking Material protects metal component surfaces.

Available in gel, brush-on, or spray-on formulations, SpeedMask® UV Curable Masking Resin provides surface protection from contamination caused by acids, alkalines, plating solutions, and ambient debris from air plasma spray, HVOF, grinding, peening, and grit blasting. Single-component, temporary masking resin is solvent-free, non-flammable, urethane-based, and water-soluble, and easily...

Read More »
UV Light Curing Conveyors handle large parts.
Material Handling & Storage

UV Light Curing Conveyors handle large parts.

Available with 18 or 25 in. wide UV curing lamps, WIDECURE(TM) conveyors can be outfitted with longwave or shortwave bulb. Lamp height can be adjusted to accept parts from 5-12 in. high, and tightly controlled line speeds are adjustable in 0.1 fpm increments from 1-50 fpm; faster conveyors are also available. Integral shielding eliminates stray UV light that might otherwise reach operator. Uses...

Read More »
Chip Encapsulant endures bending and flexing at -20°C.
Adhesives & Sealants

Chip Encapsulant endures bending and flexing at -20°C.

DYMAX 9008 chip encapsulant forms transparent layer that protects components and leads from moisture, dust, and other contaminants. Coating cures in 10-30 seconds under 200-1,200 mW/cmÂ-² intensity lights, enabling thicknesses to 1.5 mm to cure in UV conveyor belts at speeds of 2-4 ft/min. Cure depths to ¼ in. are possible. Coating adheres to variety of surfaces including...

Read More »
Formed-In-Place Gaskets are silicone-free.
Mechanical Components and Assemblies

Formed-In-Place Gaskets are silicone-free.

Curing completely in seconds upon exposure to UV light, FIP gasket GA-108 cures to black appearance on black parts to hide gasket seam. It adheres to Nylon® and many metals, making it usable for appliance and automotive assemblies. Designed for use from -60 to 150°C and curable on conveyorized assembly lines at 1-2 ft/min, GA-108 is suitable for in-line use in facilities that paint or...

Read More »

All Topics