Dymax Corp.

UV Adhesive offers alternative to PVC materials.
Adhesives & Sealants

UV Adhesive offers alternative to PVC materials.

Ultra Light-Weld 3083 adhesive provides heat- and solvent-free structural seal that securely bonds less-pliant PET, R-PET, and A-PET clamshell and blister substrates. Applied and UV-cured in seconds, product is suited for use in high-speed, fast-throughput package sealing. It requires no dedicated package tooling or equipment and can be automatically dispensed and cured inline or manually applied...

Read More »
LED Radiometer monitors UV light curing energy intensity.
Test & Measurement

LED Radiometer monitors UV light curing energy intensity.

ACCU-CAL(TM) 50-LED radiometer can measure energy levels emitted from 4, 5, and 8 mm lightguides and LED flood lamps. With spectral sensitivity range between 350-450 nm and intensity measurement from 1 mW/cmÂ-² to 40 W/cm², CE marked unit is suited for measuring LED curing-source energy levels. Photo-sensor assembly provides repeatable measurements and protection from high...

Read More »
DYMAX Launches New High-Intensity LED Spot-Curing System and Compatible Adhesives
Adhesives & Sealants

DYMAX Launches New High-Intensity LED Spot-Curing System and Compatible Adhesives

DYMAX Corporation launched their new BlueWave® LED Prime UVA high-intensity spot-curing system and a new line of compatible adhesives at the recent Assembly Technology Expo (ATExpo) in Chicago. The unit offers many advantages over conventional spot-curing systems including no consumable bulbs to change, no warm-up, cool cures, and constant intensity up to 50,000 hours. The BlueWave LED Prime...

Read More »
UVA Spot-Curing System utilizes high-energy LEDs.
Material Processing

UVA Spot-Curing System utilizes high-energy LEDs.

BlueWave® LED Prime UVA high-intensity spot-curing system delivers maximum curing energy through 5 mm diameter lightguide with output up to 15 W/cm2. Unit includes intensity adjustment feature for users to adjust/control intensity output from 0-100% to assist with process validation and control, while intensity measurement can be accomplished with radiometer. Providing LED life of over...

Read More »
Dymax Case Study - Streamlight Flashlight
Adhesives & Sealants

Dymax Case Study - Streamlight Flashlight

Torrington, CT - DYMAX Corporation helps Streamlight® Inc., a leading manufacturer of premium portable lighting, ruggedize safety flashlights used by firefighters, police officers, and military troops in the field. When Streamlight Inc. developed their High-Intensity Discharge LiteBox® and Survivor® series flashlights, they were looking for a way to ruggedize the lens and reflector...

Read More »
Adhesive fluoresces red for cure indication/inspection.
Adhesives & Sealants

Adhesive fluoresces red for cure indication/inspection.

DYMAX 3-20794 is See-Cure, color-changing adhesive formulated with Ultra-Red(TM) fluorescing technology, which allows it to be visually detected when exposed to 365 nm black light before and after it has been cured. Curing in fractions of second when exposed to high-intensity UV light, adhesive starts out bright blue in uncured state, and turns clear when enough light energy has been provided to...

Read More »
DYMAX UV Conformal Coatings and Adhesives Documented Halogen-Free
Adhesives & Sealants

DYMAX UV Conformal Coatings and Adhesives Documented Halogen-Free

DYMAX Corporation's UV conformal coatings, encapsulants, adhesives, and potting materials for electronic applications are documented by an independent laboratory to meet or exceed the halogen-free standards set forth in IEC 61249-2-21. Halogen-free declarations give users up-front confidence that materials will meet back-end requirements. Halogen-free test reports are available online at...

Read More »
Conveyor Curing System offers consistent cure times.
Material Handling & Storage

Conveyor Curing System offers consistent cure times.

DYMAX Edge Carry Series conveyors handle variety of parts, such as PCBs populated on 2 sides palletized components. Top surface curing of UV and/or visible-light-sensitive is accomplished with up to 4 UVCS 5000 lamps, one 1200/2000 EC lamp, or up to two, 6 in. microwave lamps. Standard height clearance is 6 in.; optional risers increase clearance to either 8 or 12 inches. Conveyor chains can be...

Read More »
High-Intensity Spot Lamp suits bonding applications.

High-Intensity Spot Lamp suits bonding applications.

Emitting UVA and blue visible light from 300-450 nm, RoHS-compliant BlueWave® 75 is designed for curing UV and visible light-curable adhesives, coatings, and encapsulants. Adjustment feature provides user control of light intensity to assist in process validation and control. Actuated by foot pedal or PLC, integral shutter makes lamp suited for manual and automated processes. Auto-ranging...

Read More »
Plastics Bonding Adhesive features built-in cure indicator.
Adhesives & Sealants

Plastics Bonding Adhesive features built-in cure indicator.

Formulated with See-Cure color-change technology, Ultra Light-Weld 3220-SC adhesive is bright blue in its uncured state, and turns clear after proper curing. This serves as visible indicator to confirm if adhesive has received sufficient energy to reach full cure. RoHS Directives 2002/95/EC and 2003/11EC compliant product is formulated for rapid bonding and laminating of plastics such as PC, PVC,...

Read More »

All Topics