Dapra Corporation

High-Pressure Vises support milling and grinding.
Portable Tools

High-Pressure Vises support milling and grinding.

Manufactured to precision tolerances, Arnold High-Pressure Vises provide controllable power and dependable clamping for variety of workholding applications. All-purpose Classic Hydravise delivers up to 18,000 lb of clamping pressure, with jaw widths ranging from 3.5–8 in. Hydraulic and mechanical spindles are available, as are narrow base configurations for applications requiring close...

Read More »
High-Pressure Vises support milling and grinding.
Portable Tools

High-Pressure Vises support milling and grinding.

Manufactured to precision tolerances, Arnold High-Pressure Vises provide controllable power and dependable clamping for variety of workholding applications. All-purpose Classic Hydravise delivers up to 18,000 lb of clamping pressure, with jaw widths ranging from 3.5–8 in. Hydraulic and mechanical spindles are available, as are narrow base configurations for applications requiring close...

Read More »
Spherical Ball Nose System provides indexable finishing inserts.
Agricultural & Farming Products

Spherical Ball Nose System provides indexable finishing inserts.

EDGE-²Â® Spherical Ball Nose (SBN) inserts feature 2 usable cutting edges for optimal finish quality and thick carbide construction for heat and stress absorption. Insert life allows for extended, unattended finishing runs with quality surface finishes optimized by grinding process. Also suited for tip-cutting, 3D profiling, semi-finishing, and light roughing, fully...

Read More »
Spherical Ball Nose System provides indexable finishing inserts.
Agricultural & Farming Products

Spherical Ball Nose System provides indexable finishing inserts.

EDGEÂ-²Ã‚® Spherical Ball Nose (SBN) inserts feature 2 usable cutting edges for optimal finish quality and thick carbide construction for heat and stress absorption. Insert life allows for extended, unattended finishing runs with quality surface finishes optimized by grinding process. Also suited for tip-cutting, 3D profiling, semi-finishing, and light...

Read More »
Portable Tools

Self-Centering Vise allows 5-sided machining with one setup.

With adjustable center jaws, Allmatic CENTRO Gripp Vise allows workpiece to be held during complete machining process.- Fully enclosed high-pressure spindle creates clamping force up to 8,992 lb and requires minimal maintenance. Jaw width is 5 in. with clamping ranges from 0.394–11.811 in. Made of cast iron GGG-60, vise includes precision aligning slots and positioning hole on bottom, as well...

Read More »
Portable Tools

Self-Centering Vise allows 5-sided machining with one setup.

With adjustable center jaws, Allmatic CENTRO Gripp Vise allows workpiece to be held during complete machining process.Â- Fully enclosed high-pressure spindle creates clamping force up to 8,992 lb and requires minimal maintenance. Jaw width is 5 in. with clamping ranges from 0.394–11.811 in. Made of cast iron GGG-60, vise includes precision aligning slots and positioning hole on bottom, as...

Read More »
Cutters and Inserts feature fine pitch for smooth cutting.
Construction Equipment and Supplies

Cutters and Inserts feature fine pitch for smooth cutting.

Machined from double-hardened tool steel, 12 mm Cutter Bodies and Inserts are designed with fine pitch for accelerated feed rates and smooth cutting action that minimizes noise and pressure. End Mills come in cutting diameters from 0.625–1.500 in., while Shell mills, with varying pitch options, cut from 1.5–4 in. Helical roughing end mills are available in 1.0 and 1.25- in. diameters,...

Read More »
Ball Nose Inserts feature PCD tips for wear resistance.
Construction Equipment and Supplies

Ball Nose Inserts feature PCD tips for wear resistance.

Designed for use with Dapra standard steel, carbide-core, and carbide-shank cutter bodies, Ball Nose inserts with PCD tips are precision-ground to provide sharp, accurate cutting radius. Diamond-tipped inserts exhibit wear resistance that lends to extended tool life in milling soft, non-ferrous materials, such as aluminum and graphite. Available diameters include 3/8, Â-½, and ¾ in.

Read More »
High-Pressure Vises support milling and grinding.
Portable Tools

High-Pressure Vises support milling and grinding.

Manufactured to precision tolerances, Arnold High-Pressure Vises provide controllable power and dependable clamping for variety of workholding applications. All-purpose Classic Hydravise delivers up to 18,000 lb of clamping pressure, with jaw widths ranging from 3.5–8 in. Hydraulic and mechanical spindles are available, as are narrow base configurations for applications requiring close...

Read More »
High-Pressure Vises support milling and grinding.
Portable Tools

High-Pressure Vises support milling and grinding.

Manufactured to precision tolerances, Arnold High-Pressure Vises provide controllable power and dependable clamping for variety of workholding applications. All-purpose Classic Hydravise delivers up to 18,000 lb of clamping pressure, with jaw widths ranging from 3.5–8 in. Hydraulic and mechanical spindles are available, as are narrow base configurations for applications requiring close...

Read More »
Spherical Ball Nose System provides indexable finishing inserts.
Agricultural & Farming Products

Spherical Ball Nose System provides indexable finishing inserts.

EDGE-²Â® Spherical Ball Nose (SBN) inserts feature 2 usable cutting edges for optimal finish quality and thick carbide construction for heat and stress absorption. Insert life allows for extended, unattended finishing runs with quality surface finishes optimized by grinding process. Also suited for tip-cutting, 3D profiling, semi-finishing, and light roughing, fully...

Read More »
Spherical Ball Nose System provides indexable finishing inserts.
Agricultural & Farming Products

Spherical Ball Nose System provides indexable finishing inserts.

EDGEÂ-²Ã‚® Spherical Ball Nose (SBN) inserts feature 2 usable cutting edges for optimal finish quality and thick carbide construction for heat and stress absorption. Insert life allows for extended, unattended finishing runs with quality surface finishes optimized by grinding process. Also suited for tip-cutting, 3D profiling, semi-finishing, and light...

Read More »
Portable Tools

Self-Centering Vise allows 5-sided machining with one setup.

With adjustable center jaws, Allmatic CENTRO Gripp Vise allows workpiece to be held during complete machining process.- Fully enclosed high-pressure spindle creates clamping force up to 8,992 lb and requires minimal maintenance. Jaw width is 5 in. with clamping ranges from 0.394–11.811 in. Made of cast iron GGG-60, vise includes precision aligning slots and positioning hole on bottom, as well...

Read More »
Portable Tools

Self-Centering Vise allows 5-sided machining with one setup.

With adjustable center jaws, Allmatic CENTRO Gripp Vise allows workpiece to be held during complete machining process.Â- Fully enclosed high-pressure spindle creates clamping force up to 8,992 lb and requires minimal maintenance. Jaw width is 5 in. with clamping ranges from 0.394–11.811 in. Made of cast iron GGG-60, vise includes precision aligning slots and positioning hole on bottom, as...

Read More »
Cutters and Inserts feature fine pitch for smooth cutting.
Construction Equipment and Supplies

Cutters and Inserts feature fine pitch for smooth cutting.

Machined from double-hardened tool steel, 12 mm Cutter Bodies and Inserts are designed with fine pitch for accelerated feed rates and smooth cutting action that minimizes noise and pressure. End Mills come in cutting diameters from 0.625–1.500 in., while Shell mills, with varying pitch options, cut from 1.5–4 in. Helical roughing end mills are available in 1.0 and 1.25- in. diameters,...

Read More »
Ball Nose Inserts feature PCD tips for wear resistance.
Construction Equipment and Supplies

Ball Nose Inserts feature PCD tips for wear resistance.

Designed for use with Dapra standard steel, carbide-core, and carbide-shank cutter bodies, Ball Nose inserts with PCD tips are precision-ground to provide sharp, accurate cutting radius. Diamond-tipped inserts exhibit wear resistance that lends to extended tool life in milling soft, non-ferrous materials, such as aluminum and graphite. Available diameters include 3/8, Â-½, and ¾ in.

Read More »

All Topics