Valtra, Inc

Mobile Welding Table features fully adjustable design.
Machinery & Machining Tools

Mobile Welding Table features fully adjustable design.

Pico Rivera, CA - July 27th, 2007. Strong Hand Tools(TM), worldwide designer/manufacturer of quick-acting welding clamps, magnets and pliers, is proud to announce their newest innovation - The NOMAD(TM) Economy Welding Table. This very affordable, and versatile table easily moves about the workplace, and is designed to serve a wide variety of applications. The table height is easily adjustable,...

Read More »
Mobile Welding Table features fully adjustable design.
Machinery & Machining Tools

Mobile Welding Table features fully adjustable design.

Pico Rivera, CA - July 27th, 2007. Strong Hand Tools(TM), worldwide designer/manufacturer of quick-acting welding clamps, magnets and pliers, is proud to announce their newest innovation - The NOMAD(TM) Economy Welding Table. This very affordable, and versatile table easily moves about the workplace, and is designed to serve a wide variety of applications. The table height is easily adjustable,...

Read More »
Electrical Equipment & Systems

Welding Clamp is rated 500 A at 60% duty cycle.

Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong...

Read More »
Electrical Equipment & Systems

Welding Clamp is rated 500 A at 60% duty cycle.

Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong...

Read More »
Machinery & Machining Tools

Mini Magnets assist in small part assembly.

The new Mini Magnets from Strong Hand® are designed for joining small magnetic-metal parts, such as handles, round or square pipes, and small plates to any other magnetic-metal surface to allow alignment and assembly when hand positioning is either not possible or too time-consuming. These multi-angled Mini Magnets are just 2-5/16 inches in height and 2-5/8 inches wide, with 45-degree by 30/60...

Read More »
Machinery & Machining Tools

Mini Magnets assist in small part assembly.

The new Mini Magnets from Strong Hand-® are designed for joining small magnetic-metal parts, such as handles, round or square pipes, and small plates to any other magnetic-metal surface to allow alignment and assembly when hand positioning is either not possible or too time-consuming. These multi-angled Mini Magnets are just 2-5/16 inches in height and 2-5/8 inches wide, with 45-degree by 30/60...

Read More »
Clamp aligns material for welding applications.
Electrical Equipment & Systems

Clamp aligns material for welding applications.

The 1/2-Clamp(TM) aligns material ranging from large pipes to flat stock with memories. User tack welds front side of 1-½ x 2 in. pipe to lower side of 2 surfaces to be aligned. Clamp slides onto pipe and screw is turned until material comes into alignment. Pipe can be broken off easily, and weld spot can be ground off after weld is completed. For big jobs, welder can remove, rotate, and reuse...

Read More »
Clamp aligns material for welding applications.
Electrical Equipment & Systems

Clamp aligns material for welding applications.

The 1/2-Clamp(TM) aligns material ranging from large pipes to flat stock with memories. User tack welds front side of 1Â-½ x 2 in. pipe to lower side of 2 surfaces to be aligned. Clamp slides onto pipe and screw is turned until material comes into alignment. Pipe can be broken off easily, and weld spot can be ground off after weld is completed. For big jobs, welder can remove, rotate, and...

Read More »
Magnetic Blocks have pull forces of 50 to 200 lbs.
Materials

Magnetic Blocks have pull forces of 50 to 200 lbs.

Available in 3 sizes, Strong Hand Modular Magnetic Blocks are rare earth neodymium magnets designed for use in fixturing, lifting and holding steel parts, and safely cleaning up iron and steel chips. Equipped with ON/OFF switch, magnetism can be turned off during set-up and turned on whenever user is ready. Magnetic blocks have 8 threaded holes on adjacent surfaces for mounting plate.

Read More »
Magnetic Blocks have pull forces of 50 to 200 lbs.
Materials

Magnetic Blocks have pull forces of 50 to 200 lbs.

Available in 3 sizes, Strong Hand Modular Magnetic Blocks are rare earth neodymium magnets designed for use in fixturing, lifting and holding steel parts, and safely cleaning up iron and steel chips. Equipped with ON/OFF switch, magnetism can be turned off during set-up and turned on whenever user is ready. Magnetic blocks have 8 threaded holes on adjacent surfaces for mounting plate.

Read More »
Mobile Welding Table features fully adjustable design.
Machinery & Machining Tools

Mobile Welding Table features fully adjustable design.

Pico Rivera, CA - July 27th, 2007. Strong Hand Tools(TM), worldwide designer/manufacturer of quick-acting welding clamps, magnets and pliers, is proud to announce their newest innovation - The NOMAD(TM) Economy Welding Table. This very affordable, and versatile table easily moves about the workplace, and is designed to serve a wide variety of applications. The table height is easily adjustable,...

Read More »
Mobile Welding Table features fully adjustable design.
Machinery & Machining Tools

Mobile Welding Table features fully adjustable design.

Pico Rivera, CA - July 27th, 2007. Strong Hand Tools(TM), worldwide designer/manufacturer of quick-acting welding clamps, magnets and pliers, is proud to announce their newest innovation - The NOMAD(TM) Economy Welding Table. This very affordable, and versatile table easily moves about the workplace, and is designed to serve a wide variety of applications. The table height is easily adjustable,...

Read More »
Electrical Equipment & Systems

Welding Clamp is rated 500 A at 60% duty cycle.

Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong...

Read More »
Electrical Equipment & Systems

Welding Clamp is rated 500 A at 60% duty cycle.

Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong...

Read More »
Machinery & Machining Tools

Mini Magnets assist in small part assembly.

The new Mini Magnets from Strong Hand® are designed for joining small magnetic-metal parts, such as handles, round or square pipes, and small plates to any other magnetic-metal surface to allow alignment and assembly when hand positioning is either not possible or too time-consuming. These multi-angled Mini Magnets are just 2-5/16 inches in height and 2-5/8 inches wide, with 45-degree by 30/60...

Read More »
Machinery & Machining Tools

Mini Magnets assist in small part assembly.

The new Mini Magnets from Strong Hand-® are designed for joining small magnetic-metal parts, such as handles, round or square pipes, and small plates to any other magnetic-metal surface to allow alignment and assembly when hand positioning is either not possible or too time-consuming. These multi-angled Mini Magnets are just 2-5/16 inches in height and 2-5/8 inches wide, with 45-degree by 30/60...

Read More »
Clamp aligns material for welding applications.
Electrical Equipment & Systems

Clamp aligns material for welding applications.

The 1/2-Clamp(TM) aligns material ranging from large pipes to flat stock with memories. User tack welds front side of 1-½ x 2 in. pipe to lower side of 2 surfaces to be aligned. Clamp slides onto pipe and screw is turned until material comes into alignment. Pipe can be broken off easily, and weld spot can be ground off after weld is completed. For big jobs, welder can remove, rotate, and reuse...

Read More »
Clamp aligns material for welding applications.
Electrical Equipment & Systems

Clamp aligns material for welding applications.

The 1/2-Clamp(TM) aligns material ranging from large pipes to flat stock with memories. User tack welds front side of 1Â-½ x 2 in. pipe to lower side of 2 surfaces to be aligned. Clamp slides onto pipe and screw is turned until material comes into alignment. Pipe can be broken off easily, and weld spot can be ground off after weld is completed. For big jobs, welder can remove, rotate, and...

Read More »
Magnetic Blocks have pull forces of 50 to 200 lbs.
Materials

Magnetic Blocks have pull forces of 50 to 200 lbs.

Available in 3 sizes, Strong Hand Modular Magnetic Blocks are rare earth neodymium magnets designed for use in fixturing, lifting and holding steel parts, and safely cleaning up iron and steel chips. Equipped with ON/OFF switch, magnetism can be turned off during set-up and turned on whenever user is ready. Magnetic blocks have 8 threaded holes on adjacent surfaces for mounting plate.

Read More »
Magnetic Blocks have pull forces of 50 to 200 lbs.
Materials

Magnetic Blocks have pull forces of 50 to 200 lbs.

Available in 3 sizes, Strong Hand Modular Magnetic Blocks are rare earth neodymium magnets designed for use in fixturing, lifting and holding steel parts, and safely cleaning up iron and steel chips. Equipped with ON/OFF switch, magnetism can be turned off during set-up and turned on whenever user is ready. Magnetic blocks have 8 threaded holes on adjacent surfaces for mounting plate.

Read More »

All Topics