Hedland
Milwaukee, WI 53223
Portable Hydraulic Tester features internal burst disc.
Flo-tech(TM) PFM Tester Series incorporates field-replaceable safety pressure relief disc (burst disc). IN case of over pressurization, design ensures fluid is safely allowed to bypass load valve and remain within hydraulic system. No fluids will escape outside of the tester, reducing maintenance and potential harm to environment. Used to measure flow, pressure, temperature, and horsepower on...
Read More »Flo Tech(TM) PFM Tester Series
Flo-tech PFM Tester Series Offers Internal Burst Disk The durable, rugged and long time used PFM Tester Series by Flo-tech, is now featuring an internal burst disk. The growing PFM series has been relied on to simultaneously measure flow, pressure and temperature on hydraulic machines. The PFM line is being implemented on all units to include the internal bust disk component. The design will help...
Read More »
Easy-to-Use EZ-View Works Best In Semiconductor Applications
Featuring an easy-to-read flow rate indicator, Hedland's EZ-View Flow Meter monitors a wide range of liquids under rigorous conditions required in industrial-class, and semiconductor applications. This low cost, low pressure meter includes a unique spring loaded variable-area design. The EZ-View meters can be installed in any position without affecting accuracy and can be installed quickly...
Read More »Flow Transmitter minimizes power consumption.
To avoid consuming too much power, MR Flow Transmitter activates only portions of Anisotropic Magnetoresistive array electronics in systematic way. Microprocessor individually selects and reads output voltage of 7 AMR sensors. Signal is then routed through multiplexing circuit, instrumentation amplifier, low pass filter, and A/D converter built into microprocessor. Based on readings,...
Read More »
The MR Flow Transmitters Are Here!
Racine, WI, April 3, 2006 - The MR Flow Transmitter combines state-of-the-art microprocessor-based technology with the rugged proven technology of a piston-type variable area flow meter. The solid state design electronically senses movement of the magnetic piston assembly and provides accurate, repeatable flow measurement. No mechanical linkages to bind or impede flow signal strength. The user...
Read More »
Ultrasonic Flow Meter measures bi-directional flows.
Providing instantaneous and accumulated flow measurements, HTTP Portable Transit Time Ultrasonic Flow Meter works on pipes larger than Â-½ in. dia to measure forward, reverse, and net total flow. Meter clamps directly to pipe and does not contact flowing liquid. Kit includes UltraLink(TM) Windows® software, transducer set, 20 ft interconnection cable, 1 tube of acoustic couplant,...
Read More »
Electronic Interface works with turbine flow meters.
PC-programmable F5140 K-Factor Scaler acts as field-adjustable frequency divider, converting pulsed frequency output from turbine flow meter to scaled, square wave output. It provides interface for PLC, RTU, PC DAQ cards, or any frequency counter or data input device. With optional software, unit also converts turbine meter output into frequency for other units of measurement. Interface includes...
Read More »
Intelligent Frequency Converters are field-programmable.
Intelligent Frequency Converters (IFCs) produce analog output signal that measures and calculates flow rate of turbine flow meter. Microprocessor-based units are offered with 4-20 mA (F to I) or 0-5 Vdc (F to V) output signal and designed for integration with Flo-tech F6700 and F6750 Series digital displays. In operation, units convert turbine meter pulse output into one of above frequency...
Read More »
Digital Displays work with turbine flow sensors.
Panel-mounted HB2800, designed for use with Ultima and Classic Flow Sensors, accepts non-amplified frequency input and calculates rate of flow and total flow. Model F6600 accepts inputs from Ultima and Classic Turbine Flow Sensors as well as other sources. Meters provide 6 display indications and can be customized. Model F6700, for use with Flo-tech Activa Sensor Arrays, accepts 4-20 mA or 0-10...
Read More »
Flow Meters suit high-viscosity fluid applications.
Positive displacement Series HPD provides seamless integration into central process control systems. Units maintain accuracy within ±0.5% at low flow rates, despite changing viscosities. Available in Â-¼, ½, and 1¼ in. NPT port sizes for flow ranges of .003-120 gpm, meters operate at pressures to 5,000 psi and temperatures to 400ºF. Batch controllers HPD-BAC and...
Read More »
Portable Hydraulic Tester features internal burst disc.
Flo-tech(TM) PFM Tester Series incorporates field-replaceable safety pressure relief disc (burst disc). IN case of over pressurization, design ensures fluid is safely allowed to bypass load valve and remain within hydraulic system. No fluids will escape outside of the tester, reducing maintenance and potential harm to environment. Used to measure flow, pressure, temperature, and horsepower on...
Read More »Flo Tech(TM) PFM Tester Series
Flo-tech PFM Tester Series Offers Internal Burst Disk The durable, rugged and long time used PFM Tester Series by Flo-tech, is now featuring an internal burst disk. The growing PFM series has been relied on to simultaneously measure flow, pressure and temperature on hydraulic machines. The PFM line is being implemented on all units to include the internal bust disk component. The design will help...
Read More »
Easy-to-Use EZ-View Works Best In Semiconductor Applications
Featuring an easy-to-read flow rate indicator, Hedland's EZ-View Flow Meter monitors a wide range of liquids under rigorous conditions required in industrial-class, and semiconductor applications. This low cost, low pressure meter includes a unique spring loaded variable-area design. The EZ-View meters can be installed in any position without affecting accuracy and can be installed quickly...
Read More »Flow Transmitter minimizes power consumption.
To avoid consuming too much power, MR Flow Transmitter activates only portions of Anisotropic Magnetoresistive array electronics in systematic way. Microprocessor individually selects and reads output voltage of 7 AMR sensors. Signal is then routed through multiplexing circuit, instrumentation amplifier, low pass filter, and A/D converter built into microprocessor. Based on readings,...
Read More »
The MR Flow Transmitters Are Here!
Racine, WI, April 3, 2006 - The MR Flow Transmitter combines state-of-the-art microprocessor-based technology with the rugged proven technology of a piston-type variable area flow meter. The solid state design electronically senses movement of the magnetic piston assembly and provides accurate, repeatable flow measurement. No mechanical linkages to bind or impede flow signal strength. The user...
Read More »Latest Catalog Has New and Enhanced Products
New products mean new solutions. Hedland, the leading manufacturer of flow meters, introduces its latest catalog providing specifications and ordering information for water and water-based turbine flow meters. Hedland's Turbine Flow Meters for Water and Water-Based Fluids reference catalog lists the features and specifications in an easy-to-read format, as well as handy ordering information with...
Read More »
Ultrasonic Flow Meter measures bi-directional flows.
Providing instantaneous and accumulated flow measurements, HTTP Portable Transit Time Ultrasonic Flow Meter works on pipes larger than Â-½ in. dia to measure forward, reverse, and net total flow. Meter clamps directly to pipe and does not contact flowing liquid. Kit includes UltraLink(TM) Windows® software, transducer set, 20 ft interconnection cable, 1 tube of acoustic couplant,...
Read More »
Electronic Interface works with turbine flow meters.
PC-programmable F5140 K-Factor Scaler acts as field-adjustable frequency divider, converting pulsed frequency output from turbine flow meter to scaled, square wave output. It provides interface for PLC, RTU, PC DAQ cards, or any frequency counter or data input device. With optional software, unit also converts turbine meter output into frequency for other units of measurement. Interface includes...
Read More »
Intelligent Frequency Converters are field-programmable.
Intelligent Frequency Converters (IFCs) produce analog output signal that measures and calculates flow rate of turbine flow meter. Microprocessor-based units are offered with 4-20 mA (F to I) or 0-5 Vdc (F to V) output signal and designed for integration with Flo-tech F6700 and F6750 Series digital displays. In operation, units convert turbine meter pulse output into one of above frequency...
Read More »
Digital Displays work with turbine flow sensors.
Panel-mounted HB2800, designed for use with Ultima and Classic Flow Sensors, accepts non-amplified frequency input and calculates rate of flow and total flow. Model F6600 accepts inputs from Ultima and Classic Turbine Flow Sensors as well as other sources. Meters provide 6 display indications and can be customized. Model F6700, for use with Flo-tech Activa Sensor Arrays, accepts 4-20 mA or 0-10...
Read More »
