MTE Corp.

Electronic Components & Devices

Protective Filter helps extend high frequency motor life.

Offering reliability and durability up to 15,000 ft as protective filter in commercial and industrial applications, 380–480 V High Frequency SineWave Guardian™ cleans PWM waveforms generated by VFDs at switching frequencies from 4.8–8 kHz. Solution virtually eliminates voltage distortion (THVD) generated by VFDs, which results in loss reduction, protection against motor overheating, and...

Read More »
Electronic Components & Devices

MTE Expands Its Matrix® Harmonic Filter Portfolio by Introducing the Matrix® APAX for the Asia Pacific Market

MENOMONEE FALLS, Wis. — MTE Corporation , an SL IndustriesÂ-  Company, a world leader in the design and manufacture of high-efficiency electrical power quality solutions for commercial and industrial applications, introduces the patented Matrix® APAX Harmonic Filter. This filter series broadens MTE's portfolio of Matrix® harmonic filters to meet applications that require...

Read More »
Compact dV/dt Filter delivers three-in-one motor protection.
Electronic Components & Devices

Compact dV/dt Filter delivers three-in-one motor protection.

Available in NEMA1/2 and NEMA 3R configurations, 380–600 V dV Sentry™ helps protect AC motors from destructive effects ofÂ- extended lead voltages that can damage VFDs, cables, and motors. Triple Defense Core technology offers protection against peak voltage, high rise times, and common mode voltage reduction. Ability to reduce common mode voltage by >50% reduces damage to motor bearings...

Read More »
Harmonic Filters include 600 and 690 V variants.
Electronic Components & Devices

Harmonic Filters include 600 and 690 V variants.

Operating at over 99% efficiency, Matrix® AP harmonic filters include 600 V, 60 Hz and 690 V, 50 Hz models that help designs meet IEEE-519 requirements for harmonic distortion regardless of power load. These UL and cUL Listed products employ Adaptive Passive technology and adapt impedance in response to changing electrical loads. AvailableÂ- with 6–786 A...

Read More »
Electronic Components & Devices

Harmonic Filters adapt impedance in response to changing loads.

In addition to 83-1,200 A models, Matrix AP Series includes 6-66 A units. All 6-103 A models utilize single 3-phase capacitor. Available on all 6-1,200 A filters, Capacitor Contactor Option 002 disconnects capacitor bank, essentially eliminating leading power factor under light or no-load conditions. Offered in open panel, NEMA 1/2, and NEMA 3R models, UL/cUL listed passive filters help extend...

Read More »
Electronic Components & Devices

Harmonic Filter utilizes adaptive passive technology.

Matrix® AP Harmonic Filter provides harmonic mitigation for improved power quality and energy efficiency. With standalone efficiency exceeding 99% throughout load range, product adapts its impedance in response to changing loads. Design minimizes capacitor use and eliminates need for resistors, consequently lowering heat generation and negating need for fan. Filters come in open panel and...

Read More »
Electronic Components & Devices

Active Harmonic Filter supplies up to 960 A correcting current.

Supplied in wall mount configuration, 480 V Matrix PureSine® Active Harmonic Filter is used for coordinated variable load PFC, phase imbalance, and harmonic mitigation. Modular unit operates up to 51st harmonic with up to 12 harmonic orders selected individually. Supporting parallel operation, device features full-time DSP control system, shunt connection to facilitate maintenance, and LCD...

Read More »
Sine Wave Filters meet IEEE-519 requirements.
Electronic Components & Devices

Sine Wave Filters meet IEEE-519 requirements.

Series A provides sine-wave output voltage when driven from PWM inverters with switching frequencies from 2-8 kHz. For drive applications, filters eliminate motor insulation failures and reduce EMI in applications where distance between motor and inverter is up to 15,000 ft. Available as panel-mount or in NEMA 1, 2, and 3R enclosures, units offer continuous current rating of 100% RMS. They range...

Read More »
Electronic Components & Devices

Protective Filter helps extend high frequency motor life.

Offering reliability and durability up to 15,000 ft as protective filter in commercial and industrial applications, 380–480 V High Frequency SineWave Guardian™ cleans PWM waveforms generated by VFDs at switching frequencies from 4.8–8 kHz. Solution virtually eliminates voltage distortion (THVD) generated by VFDs, which results in loss reduction, protection against motor overheating, and...

Read More »
Electronic Components & Devices

MTE Expands Its Matrix® Harmonic Filter Portfolio by Introducing the Matrix® APAX for the Asia Pacific Market

MENOMONEE FALLS, Wis. — MTE Corporation , an SL IndustriesÂ-  Company, a world leader in the design and manufacture of high-efficiency electrical power quality solutions for commercial and industrial applications, introduces the patented Matrix® APAX Harmonic Filter. This filter series broadens MTE's portfolio of Matrix® harmonic filters to meet applications that require...

Read More »
Compact dV/dt Filter delivers three-in-one motor protection.
Electronic Components & Devices

Compact dV/dt Filter delivers three-in-one motor protection.

Available in NEMA1/2 and NEMA 3R configurations, 380–600 V dV Sentry™ helps protect AC motors from destructive effects ofÂ- extended lead voltages that can damage VFDs, cables, and motors. Triple Defense Core technology offers protection against peak voltage, high rise times, and common mode voltage reduction. Ability to reduce common mode voltage by >50% reduces damage to motor bearings...

Read More »
Harmonic Filters include 600 and 690 V variants.
Electronic Components & Devices

Harmonic Filters include 600 and 690 V variants.

Operating at over 99% efficiency, Matrix® AP harmonic filters include 600 V, 60 Hz and 690 V, 50 Hz models that help designs meet IEEE-519 requirements for harmonic distortion regardless of power load. These UL and cUL Listed products employ Adaptive Passive technology and adapt impedance in response to changing electrical loads. AvailableÂ- with 6–786 A...

Read More »
Electronic Components & Devices

Harmonic Filters adapt impedance in response to changing loads.

In addition to 83-1,200 A models, Matrix AP Series includes 6-66 A units. All 6-103 A models utilize single 3-phase capacitor. Available on all 6-1,200 A filters, Capacitor Contactor Option 002 disconnects capacitor bank, essentially eliminating leading power factor under light or no-load conditions. Offered in open panel, NEMA 1/2, and NEMA 3R models, UL/cUL listed passive filters help extend...

Read More »
Electronic Components & Devices

Harmonic Filter utilizes adaptive passive technology.

Matrix® AP Harmonic Filter provides harmonic mitigation for improved power quality and energy efficiency. With standalone efficiency exceeding 99% throughout load range, product adapts its impedance in response to changing loads. Design minimizes capacitor use and eliminates need for resistors, consequently lowering heat generation and negating need for fan. Filters come in open panel and...

Read More »
Electronic Components & Devices

Active Harmonic Filter supplies up to 960 A correcting current.

Supplied in wall mount configuration, 480 V Matrix PureSine® Active Harmonic Filter is used for coordinated variable load PFC, phase imbalance, and harmonic mitigation. Modular unit operates up to 51st harmonic with up to 12 harmonic orders selected individually. Supporting parallel operation, device features full-time DSP control system, shunt connection to facilitate maintenance, and LCD...

Read More »
Sine Wave Filters meet IEEE-519 requirements.
Electronic Components & Devices

Sine Wave Filters meet IEEE-519 requirements.

Series A provides sine-wave output voltage when driven from PWM inverters with switching frequencies from 2-8 kHz. For drive applications, filters eliminate motor insulation failures and reduce EMI in applications where distance between motor and inverter is up to 15,000 ft. Available as panel-mount or in NEMA 1, 2, and 3R enclosures, units offer continuous current rating of 100% RMS. They range...

Read More »

All Topics