Falk Corporation
Milwaukee, WI 53208
Share:
Coupling can be replaced in place.
Wrapflex non-lubricated coupling is optimized for use on NEMA and ISO motor frames. It allows replacement of element moving the connected equipment, reducing service downtime. Combination of compression design, misalignment capacity, and vibration damping enables smaller size couplings to be utilized in many applications.
Read More »
Gearmotor meets food industry sanitary requirements.
Ultramite SS right-angle, helical bevel gear drives feature smooth housing and C-Face mounting surfaces constructed of corrosion-resistant 316SS Stainless Steel. All unused housing holes are plugged with stainless steel caps, and nameplate information is etched into housing. Dual Lip/High Pressure Exclusion Seals keep lubrication in, while standing up to harsh chemical and high-pressure wash down...
Read More »
Enclosed Gear Drive Lubricant provides wear protection.
Offering thermal and oxidation stability, GMax 6000 enables users to extend operating life of enclosed gear drives up to 15,000 hours between changes. In addition, temperature capability of -30 to +235Ã-
Read More »
Drives require no auxiliary cooling.
Designed with sump capacities that augment heat dissipation, Drive One Low Ratio/High Thermal Drives meet specifications where no-cooling or shaft-fan-cooling-only is specified. They come in right angle drives with ratios from 2.9:1-25:1 and parallel shaft drives with ratios from 1.25-5.6:1. Products, available in 8 sizes, produce output torque from 12,000-140,000 lb-in. Accessories include...
Read More »
Fluid Coupling produces soft start/stop for belt conveyors.
True Torque(TM) incorporates brake disc into fluid coupling mounting arrangement and features adjustable metering orifices. When starting inclined belt conveyor, product provides soft start, eliminating belt liftoff and stretch. During shutdown, application of brake decelerates conveyor belt and prevents conveyor rollback. Coupling, constructed with double delay chamber, can achieve 40 sec...
Read More »
Coupling Guard is suited for ANSI/ISO pump connections.
Available in ANSI Safety Orange and ISO Safety Yellow, Orange Peel Type PCG pump coupling guards feature symmetrical halves injection molded from maintenance-free polyethylene and joined by hinge assembly at top. They are trimmed to length and attached to foundation with 4 fasteners. Pump-side end cap is supplied to enclose extension opening, and powder-coated metal Leg Kits are sized to...
Read More »
Drives suit low-speed, high-torque applications.
Capable of producing output torques to 4,000,000 lb-in., Drive One High Torque Drives are offered in 6 sizes in parallel or right angle configurations. Drive arrangement options include base-mounted, coupling-connected; shaft-mounted, flange-connected; and shaft-mounted, hollow-shaft connected. Ratios are available from 145:1 to over 10,000,000:1, and standard accessory offerings include motor...
Read More »
Pulper Drives are rated for severe duty.
Pulper drives incorporate water exclusion features that prevent water ingress, including external shaft slinger, V-ring seal, and tandem lip seal arrangement at vertical shaft extension. Other features include side-mounted Airmax water exclusion filter/breather, case carburized and ground gearing, and steel housings. Available in 10 sizes, drives are available with stainless steel shroud and...
Read More »
Drive System suits belt conveyors and bucket elevators.
Drive One is offered in 9 sizes of pre-engineered assemblies, all mounted on common swing base, which is shaft mounted via TA Taper bushing system, and utilizes foot-mounted motor. Suited for conveyor powers from 25-1,000 hp using NEMA or IEC frame motors, system features 6-sided horizontal or vertical mounting and ranges from 58,000-840,000 lb-in. It includes surface-hardened/low-noise gearing,...
Read More »
Coupling Guards suit electric motor/gearmotor connections.
Orange Peel Type MCG guards feature symmetrical halves injection molded from polyethylene and joined by hinge assembly at top. Products are trimmed to length and attached to foundation with 2 fasteners. Guards, offered in 3 sizes to accommodate NEMA motor frames from 56-440T, come in ANSI Safety Orange, ISO Safety Yellow, and Sanitary White. Optional End Caps enclose extension openings, and Metal...
Read More »
Coupling can be replaced in place.
Wrapflex non-lubricated coupling is optimized for use on NEMA and ISO motor frames. It allows replacement of element moving the connected equipment, reducing service downtime. Combination of compression design, misalignment capacity, and vibration damping enables smaller size couplings to be utilized in many applications.
Read More »
Gearmotor meets food industry sanitary requirements.
Ultramite SS right-angle, helical bevel gear drives feature smooth housing and C-Face mounting surfaces constructed of corrosion-resistant 316SS Stainless Steel. All unused housing holes are plugged with stainless steel caps, and nameplate information is etched into housing. Dual Lip/High Pressure Exclusion Seals keep lubrication in, while standing up to harsh chemical and high-pressure wash down...
Read More »
Enclosed Gear Drive Lubricant provides wear protection.
Offering thermal and oxidation stability, GMax 6000 enables users to extend operating life of enclosed gear drives up to 15,000 hours between changes. In addition, temperature capability of -30 to +235Ã-
Read More »
Drives require no auxiliary cooling.
Designed with sump capacities that augment heat dissipation, Drive One Low Ratio/High Thermal Drives meet specifications where no-cooling or shaft-fan-cooling-only is specified. They come in right angle drives with ratios from 2.9:1-25:1 and parallel shaft drives with ratios from 1.25-5.6:1. Products, available in 8 sizes, produce output torque from 12,000-140,000 lb-in. Accessories include...
Read More »
Fluid Coupling produces soft start/stop for belt conveyors.
True Torque(TM) incorporates brake disc into fluid coupling mounting arrangement and features adjustable metering orifices. When starting inclined belt conveyor, product provides soft start, eliminating belt liftoff and stretch. During shutdown, application of brake decelerates conveyor belt and prevents conveyor rollback. Coupling, constructed with double delay chamber, can achieve 40 sec...
Read More »
Coupling Guard is suited for ANSI/ISO pump connections.
Available in ANSI Safety Orange and ISO Safety Yellow, Orange Peel Type PCG pump coupling guards feature symmetrical halves injection molded from maintenance-free polyethylene and joined by hinge assembly at top. They are trimmed to length and attached to foundation with 4 fasteners. Pump-side end cap is supplied to enclose extension opening, and powder-coated metal Leg Kits are sized to...
Read More »
Drives suit low-speed, high-torque applications.
Capable of producing output torques to 4,000,000 lb-in., Drive One High Torque Drives are offered in 6 sizes in parallel or right angle configurations. Drive arrangement options include base-mounted, coupling-connected; shaft-mounted, flange-connected; and shaft-mounted, hollow-shaft connected. Ratios are available from 145:1 to over 10,000,000:1, and standard accessory offerings include motor...
Read More »
Pulper Drives are rated for severe duty.
Pulper drives incorporate water exclusion features that prevent water ingress, including external shaft slinger, V-ring seal, and tandem lip seal arrangement at vertical shaft extension. Other features include side-mounted Airmax water exclusion filter/breather, case carburized and ground gearing, and steel housings. Available in 10 sizes, drives are available with stainless steel shroud and...
Read More »
Drive System suits belt conveyors and bucket elevators.
Drive One is offered in 9 sizes of pre-engineered assemblies, all mounted on common swing base, which is shaft mounted via TA Taper bushing system, and utilizes foot-mounted motor. Suited for conveyor powers from 25-1,000 hp using NEMA or IEC frame motors, system features 6-sided horizontal or vertical mounting and ranges from 58,000-840,000 lb-in. It includes surface-hardened/low-noise gearing,...
Read More »
Coupling Guards suit electric motor/gearmotor connections.
Orange Peel Type MCG guards feature symmetrical halves injection molded from polyethylene and joined by hinge assembly at top. Products are trimmed to length and attached to foundation with 2 fasteners. Guards, offered in 3 sizes to accommodate NEMA motor frames from 56-440T, come in ANSI Safety Orange, ISO Safety Yellow, and Sanitary White. Optional End Caps enclose extension openings, and Metal...
Read More »