Miller Electric Manufacturing, an ITW company

Portable Wire Feeder includes Soft Start(TM) run-in control.
Communication Systems & Equipment

Portable Wire Feeder includes Soft Start(TM) run-in control.

Voltage-sensing SuitCase(TM) X-TREME(TM) 12VS holds wire spools up to 12 in. and features SunVision(TM) digital meters that display voltage and wire feed speed or amperage, and are visible in direct sunlight. Two drive rolls provide positive feeding with solid wires from .023-5/64 in. and cored wires from .030-5/64 in. Featuring polypropylene case, feeder operates on arc voltages from 14-48 Vdc...

Read More »
DC Inverter Arc Welder produces 5-425 A output.
Electrical Equipment & Systems

DC Inverter Arc Welder produces 5-425 A output.

Offering constant voltage and current, XMT® 350 VS features Auto-Line(TM) primary power management technology and is suited for applications that require multiprocess inverter without remote control capabilities. It uses Tweco®-style connectors and includes 4-position process selector switch, adjustable dig and inductance control, Wind Tunnel Technology(TM), and Fan-on-Demand(TM). At...

Read More »
Electrical Equipment & Systems

MIG Welder features multi-voltage power cord.

Able to connect to 115 and 230 V power receptacles, Millermatic® DVI (Dual Voltage Input) MIG welding power source has 30-175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual...

Read More »
Welding Equipment & Supplies

All-In-One Arc Welding System offers jobsite portability.

Millermatic® Passport(TM) provides MIG arc welding power source, wire feeder, self-contained shielding gas system, and gun in one package. With 30-180 A current output range, system features multi-voltage plug and Auto-Line(TM) power management technology and lets operators choose between internal CO2 gas supply or bulk supply. Inverter-based technology promotes control of arc...

Read More »
Welding Generators feature sunlight-readable digital meters.
Agricultural & Farming Products

Welding Generators feature sunlight-readable digital meters.

Trailblazer® 302 provides 30-300 A dc output and 35-225 A ac output, while Trailblazer® 275 offers 30-275 A dc output. Engine-driven units include 4 preset DIG settings, adaptive hot start, and lift-arc/scratch start TIG with auto-stop. They deliver 10,000 W of useable peak power for minimum of 30 seconds, suitable for plasma cutting and running MIG welder. A 12 gal fuel tank allows...

Read More »
AC/DC, TIG/Stick Power Sources have integrated cooler.
Electrical Equipment & Systems

AC/DC, TIG/Stick Power Sources have integrated cooler.

To prevent torch damage by monitoring coolant flow and temperature, Syncrowave® 250 DX and 350 LX incorporate Cool-On-Demand(TM) feature. Syncro-Start(TM) technology provides choice of 3 starting conditions to optimize starts to match tungsten diameter and material thickness. Power sources, with welding ranges of 3-310 A and 3-400 A, also incorporate built-in consumables storage drawer,...

Read More »
Power Sources provide pulsed MIG welding.
Welding Equipment & Supplies

Power Sources provide pulsed MIG welding.

Millermatic® 350 and 350P offer 208/230 or 460/575 V single- and 3-phase input power, duty-cycle rating of 60% at 300 A/32 V, 25-400 A output, and line voltage compensation. Operators can disconnect MIG gun and replace it with optional push-pull wire feed gun. Model 350P has 4-roll wire drive system with 2 scaled tension adjustments and reversible drive rolls for .035 and .045 wire. Units...

Read More »
Multi-MIG Welding Inverters monitor arc conditions.
Electrical Equipment & Systems

Multi-MIG Welding Inverters monitor arc conditions.

Software-driven, Axcess(TM) 675 provides output of 675 A/44 V at 100% duty cycle, making it suited for large welds requiring long cycle times. Voltage range in CV mode is 10-44 V with 80 Vdc max open circuit voltage. Auto-Line technology enables machine to accept any primary power from 190-630 V, single- or 3-phase, 50 or 60 Hz. Auto-Axcess 675 offers same features but communicates through...

Read More »
Multiprocess Inverter utilizes Auto-Line(TM) technology.
Electrical Equipment & Systems

Multiprocess Inverter utilizes Auto-Line(TM) technology.

Weighing 80 lb, XMT® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Line(TM) primary power management technology, 5-425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance...

Read More »
Welding Generator offers multiprocess welding ouput.
Agricultural & Farming Products

Welding Generator offers multiprocess welding ouput.

Mid-frame, diesel engine-driven PRO 300 CC/CV provides Lift-Arc(TM) TIG arc starts suitable for code-quality welds on process pipe and true CV output for flux cored wires used for structural steel. Measuring 32 x 26 x 56 in., unit weighs 1,100 lb and utilizes 1,800 rpm CAT diesel engine. It produces 20-410 A multiprocess welding output (Stick, TIG, MIG, Flux Cored) and 12 kW of generator power.

Read More »

All Topics