Miller Electric Manufacturing, an ITW company

Welding Equipment & Supplies

Push-Pull MIG Gun optimizes aluminum welding.

Rated for welding at 300 A/100% duty cycle, Model XR-Aluma-Pro(TM) gooseneck-style air-cooled MIG gun optimizes feeding performance for 4000 and 5000 series aluminum through 2-position tension control, while water-cooled unit is rated for welding at 400 A/100% duty cycle. Both feature 3Â-¾ turn potentiometer for wire feed speed (WFS) control that can be adjusted while wearing welding gloves,...

Read More »
AC/DC TIG Welders promote optimal low-end arc starts.
Electrical Equipment & Systems

AC/DC TIG Welders promote optimal low-end arc starts.

Syncrowave® 250 DX and 350 LX feature low-end DC TIG arc starting capabilities that help prevent burn-through when welding thin metal. While use of 1/6 in. or smaller diameter tungsten electrode is recommended for low-amperage arc starts or welding thin materials, power source's arc starting circuit also provides positive arc starts with 3/32, 5/32, and 1/8 in. dia tungsten. Other features...

Read More »
Miller to Showcase TIG Welders, Lightweight Plasma Cutter and New Millermatic MIG Welders at 2007 FABTECH International/AWS Welding Show
Agricultural & Farming Products

Miller to Showcase TIG Welders, Lightweight Plasma Cutter and New Millermatic MIG Welders at 2007 FABTECH International/AWS Welding Show

APPLETON, Wis., July 23, 2007 - Miller Electric Mfg. Co. (booth #4071) will showcase its new Dynasty 350 AC/DC TIG inverter, Maxstar 350 DC TIG inverter, Spectrum 375 X-TREME plasma cutter and three new Millermatic models: the Millermatic 212, DVI2 and 252, at the 2007 FABTECH International/AWS Welding Show in Chicago, November 11-14. Additional new products may be announced before the show. Full...

Read More »
MIG Welders eliminate need to lift gas cylinders.
Welding Equipment & Supplies

MIG Welders eliminate need to lift gas cylinders.

Millermatic(TM) DVI2(TM) (Dual Voltage Input 230/115 V), 212 (210 amps @ 30% duty cycle), and 252 (250 A @ 40% duty cycle) feature angled dual-gear drive system with spring-loaded drive roll assembly for facilitated wire changes, tool-less drive roll changeover, drive roll storage, and smooth wire feeding. EZ-Change(TM) cylinder rack allows operators roll gas cylinders on and off. Design also...

Read More »
Safety & Security Equipment

New Miller Electric Helmets Take the Lead with Fire and Speed

APPLETON, Wis., May 16, 2007-Miller Electric Mfg. Co. recently introduced two new designs - Motorsports(TM) and Fire Storm(TM) - to its new Performance Series(TM) line of auto-darkening welding helmets. The Motorsports helmet captures the essence of speed," explained Miller product manager Tom Sommers. "NASCAR, boat racing, motocross, you name it-if it involves an engine and going fast, that's...

Read More »
TIG Welder features high-speed pulsing capability.
Welding Equipment & Supplies

TIG Welder features high-speed pulsing capability.

Adjustable from 0.1-5,000 pulses/sec, Maxstar 350 DC TIG/Stick Inverter delivers 5-350 A and features Auto-Line technology, which allows it to run from any input power, 208-575 v, single- or 3-phase. Users can control amount of time each pulse cycle spends at peak amperage from 5-95% of total cycle time and set background or low current pulsing from 5-99% of peak amperage. Welder is suited for...

Read More »
Welding Helmets include magnifying lens holder.
Safety & Security Equipment

Welding Helmets include magnifying lens holder.

Designed for professional and production welders, Performance Series(TM) features 3 arc sensors that darken lens between shade No. 8-13 in 1/20,000 of sec. Auto-On/Auto-Off feature activates lens shade without having to manually turn helmet on, while Grind Mode stops lens from darkening while grinding. Additional features include magnifying lens holder and quick-release front lens cover....

Read More »
AC/DC TIG Inverter welds aluminum up to ¾ in. thick.
Welding Equipment & Supplies

AC/DC TIG Inverter welds aluminum up to ¾ in. thick.

Featuring independent AC amplitude/amperage control, Dynasty® 350 AC/DC TIG inverter delivers 5-350 A and runs from 208-575 V, 1- or 3-phase input power source. In DC TIG mode, it permits pulsing at frequencies of 0.1-5,000 pulses/sec, while in AC TIG mode, frequency control of 20-400 Hz at 0.1-500 pulses/sec is allowed, with 4 options for optimizing arc characteristics. Device includes...

Read More »
Case enables transport of welder and equipment.
Electronic Components & Devices

Case enables transport of welder and equipment.

Featuring telescoping handle, Travel Pak consists of wheeled, water-resistant cloth case with padded shoulder straps and enough storage for Maxstar 150 STL or STH TIG/Stick welding power source and accessories. It can be ordered by itself or as package that includes welder, Kline Side Cutter, Nicholson file, inspection mirror, Weiler® Stainless Steel brushes, MagLite(TM), Smith flowmeter,...

Read More »
All-In-One MIG Welder produces minimal spatter.
Welding Equipment & Supplies

All-In-One MIG Welder produces minimal spatter.

Millermatic® 180 utilizes Smooth-Start(TM) technology to initiate arc in controlled manner, providing smooth, spatter-free starts and minimal rework. Rated to 135 A at 22 Vdc, product welds up to 5/16 in. mild steel in one pass. It features single-phase, 230 V input; 30% duty cycle output; and infinite voltage control with manual on/off wire feed speed tracking which automatically adjusts...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers