Modine Manufacturing Co.
Racine, WI 53403
Share:
New Condensing/Hybrid Heating Options Include High Air Temperature Rise Capability
Combines 81% efficient furnaces with condensing furnaces in a stacked configuration. Wide system modulation range allows high air temperatures to capably temper very cold design outside air conditions. Meets challenging ventilation air heating requirements while offering significant savings in gas consumption.
Read More »New GulfClean Coil Cleaner Applied to Packaged and Split-System Outdoor Unit Coils
Salt reducer is typically diluted in a 50:1 to 100:1 ratio and applied with hand pump-up sprayer and rinsed within 10 minutes. Ideal for removing soluble salts without affecting coating adhesion on coated evaporator and condenser coils. Cleaners are environmentally-friendly, biodegradable, non-acid and non-caustic foaming cleaner that attacks dirt and salt.
Read More »
New Low-Temperature Hot Water Heater is UL 1995 Certified
Features high-temperature output and high-efficiency 4-row coil. Comes with smaller fan and a motor for lower system amp draw. Available in six sizes and is ideal for use in warehouses, industrial buildings, mechanical rooms, manufacturing plants and entryways.
Read More »
Modine Announces Electronically Commutated Motor with High Efficiency and Low Electricity Use
Standard or high static motor option to accommodate a wide range of external static pressures. Lower heat waste to improve life of motor parts and lowers energy cost. Wide operating range, as one EC motor can replace multiple older models.
Read More »
Modine Presents New BTP Power Vented Heater with Factory Installed Blower Assemblies
The BTP Power Vented Heater is available in seven sizes in the range of 150,000 – 400,000 BTUs. The product comes with 409 stainless steel primary heat exchanger and delivers 82 percent thermal efficiency. The heater is certified to ELT standards for use in commercial and industrial environments. The device allows for higher mounting heights and various air flow settings for use in larger...
Read More »
Latest BMS Monitoring System Offers Communication Over BACnet and Modbus Protocols
The Modine Building Management System (BMS) Monitoring System provides control of the heating units in the building using customer’s BMS interface. BMS board can control three outputs (blower, stage 1 valve, stage 2 valve). BMS allows units to be switched between summer/winter operations, turn the unit on/off or change the heating/fan-only set point and set point band. BMS communication board...
Read More »
Atherion® D Cabinet HVAC Unit features PF™ Aluminum Microchannel condenser coils.
Atherion® D Cabinet HVAC Unit offers capabilities in the range 4,000 to 12,000 CFM with 30 and 40 Tons cooling ratings and 7,000 to 18,000 with 52 and 60 tons rating. Unit is rated to 400 to 1600 MBH heating rate and 40 to 200 kW heating rate. Product comes with right and left side access doors for maintenance of blower, filter, damper and heat section. Atherion® D Cabinet is suitable for use...
Read More »
GeoSync™ Geothermal Heat Pump comes with Modine CF™ microchannel air coil.
Combined with Decstar Blower with integrated EC Motor, GeoSync™ Water-to-Air Geothermal Heat Pump is equipped with standard 4 in. MERV 11 Filters. Featuring vertical control panel with separate high and low voltage sections, unit is available in 2 to 6 ton options. Using natural heat and cooling properties from ground, product creates free energy in given space.
Read More »HVAC ClassMate Study Package features redesigned baffle.
Developed to meet background noise pre-requisites for LEED-designed facilities, ClassMate® upgraded HVAC Study Package offers redesigned cabinet to reduce air flow velocity. Including improved acoustic insulation with barrier, ClassMate with STUDY Package features noise improvement of up to 7dB(A). Suitable for classroom heating and cooling ventilation systems, unit improves noise reduction with...
Read More »MCV and MVV Make-Up Air Units extend airflow capability to 800CFM.
Available with two model options MCV and MVV, Direct Fired Make-Up Air Unit operates quietly with neoprene vibration isolated blower and motor. Featuring auto-velocity™ profile system, device automatically adjusts burner air velocity for optimal combustion. Providing prewired 10 foot long power and control wiring harnesses, device provides galvanized interior double wall liners for ease of...
Read More »
New Condensing/Hybrid Heating Options Include High Air Temperature Rise Capability
Combines 81% efficient furnaces with condensing furnaces in a stacked configuration. Wide system modulation range allows high air temperatures to capably temper very cold design outside air conditions. Meets challenging ventilation air heating requirements while offering significant savings in gas consumption.
Read More »Modine Brazil Wins Technology Excellence Award From Mercedes-Benz® Brazil
RACINE, Wis., Oct. 31, 2019 /PRNewswire/ -- Modine Manufacturing Company (NYSE: MOD), a diversified global leader in thermal management technology and solutions, recently received the Technology Excellence Award 2018/2019 from Mercedes-Benz Brazil at its Supplier Day event in Sao Paulo, Brazil. Modine Brazil was one of only two suppliers acknowledged for Technology Excellence. "Being...
Read More »New GulfClean Coil Cleaner Applied to Packaged and Split-System Outdoor Unit Coils
Salt reducer is typically diluted in a 50:1 to 100:1 ratio and applied with hand pump-up sprayer and rinsed within 10 minutes. Ideal for removing soluble salts without affecting coating adhesion on coated evaporator and condenser coils. Cleaners are environmentally-friendly, biodegradable, non-acid and non-caustic foaming cleaner that attacks dirt and salt.
Read More »
New Low-Temperature Hot Water Heater is UL 1995 Certified
Features high-temperature output and high-efficiency 4-row coil. Comes with smaller fan and a motor for lower system amp draw. Available in six sizes and is ideal for use in warehouses, industrial buildings, mechanical rooms, manufacturing plants and entryways.
Read More »Modine to Sell Stake in Nikkei Heat Exchanger Company Joint Venture
RACINE, Wis., July 31, 2019 /PRNewswire/ -- Modine Manufacturing Company (NYSE: MOD), a diversified global leader in thermal management technology and solutions, announced today that it signed an agreement to sell its 50% stake in its Nikkei Heat Exchanger Company, Ltd. joint venture to its partner in the joint venture, Japan-based Nippon Light Metal Company, Ltd., (NLM). The sale is expected...
Read More »Modine Named Finalist at FCA North American 2019 Supplier of the Year Awards
RACINE, Wis., July 24, 2019 /PRNewswire/ -- Modine Manufacturing Company (NYSE: MOD), a diversified global leader in thermal management technology and solutions, was recognized earlier this month by Fiat Chrysler Automobiles (FCA), as one of three finalists at the 2019 Annual Supplier Conference and Award Ceremony in the Engine Systems Supplier category. FCAs Supplier of the Year awards...
Read More »Modine Honored by 2020 Women on Boards for Having 20% or More Corporate Board Seats Held by Women
Racine, Wis., July 15, 2019 /PRNewswire/ -- Modine Manufacturing Company (NYSE: MOD), a diversified global leader in thermal management technology and solutions, has been named a Winning 'W' Company by 2020 Women on Boards for achieving at least 20% women on its corporate board before the year 2020. This is the seventh time Modine received the award. Winning 'W' Companies are...
Read More »Modine Receives Navistar Top Supplier Award
Exclusive Diamond Supplier status is only given to the top five percent of the company's supply base RACINE, Wis., March 18, 2019 /PRNewswire/ -- Modine Manufacturing Company (NYSE: MOD), a diversified global leader in thermal management technology and solutions, received Navistar's exclusive Diamond Supplier Award for exceeding performance expectations in four key areas: cost,...
Read More »
Modine Announces Electronically Commutated Motor with High Efficiency and Low Electricity Use
Standard or high static motor option to accommodate a wide range of external static pressures. Lower heat waste to improve life of motor parts and lowers energy cost. Wide operating range, as one EC motor can replace multiple older models.
Read More »
Modine Presents New BTP Power Vented Heater with Factory Installed Blower Assemblies
The BTP Power Vented Heater is available in seven sizes in the range of 150,000 – 400,000 BTUs. The product comes with 409 stainless steel primary heat exchanger and delivers 82 percent thermal efficiency. The heater is certified to ELT standards for use in commercial and industrial environments. The device allows for higher mounting heights and various air flow settings for use in larger...
Read More »
