Oil-Rite Corporation
Manitowoc, WI 54221
Liquid Level Gages offer adjustable centerlines.
Compensating for variances that can occur during production of plastic tanks, nylon liquid level gages accommodate centerline distances up to -¼ in. longer or shorter than specified measurement for total adjustability of -½ in. Adjustment can be made by hand, facilitating installation, and features include round Trogamid nylon sight that is clear and durable. Gages are available with centerline...
Read More »
Spray Dispenser maximizes uptime via continuous operation.
Intended for continuously operating machinery, auto-fill spray dispenser uses alternating reservoirs in controlled sequence to attain always-on status. Fully automated unit provides constant source of pressurized fluid. When one reservoir is pressurized and dispensing, other reservoir is depressurized and refilled to eliminate need for attendant and periodic shutdowns. PLC controlled dispenser...
Read More »
Industrial Fluid Reservoirs offer maximum fluid visibility.
Designed with molded polycarbonate endplates, Clear View Reservoirs eliminate need for gaskets and center post to tie together top and bottom plates, maximizing fluid visibility. Swivel fill cap keeps cap attached but out of way during filling. Available in multiple outlet configurations and in remote or pipe mounting designs, reservoirs come in Pyrex or acrylic with capacities of 2 -½ oz, 5 oz,...
Read More »Lubricator distributes oil to hundreds of lube points.
Able to distribute oil to as few as 12 and as many as hundreds of points, Hydracision-® combines hydraulic movement of fluid with positive displacement injection. System provides frequent, small doses of lubricant, allowing oil to reach critical areas when needed with little or no run-off or waste. Self-contained package consists of- clear polycarbonate fluid reservoir, in standard 2 L size,...
Read More »Positive Displacement Pump offers high-temperature nozzle.
Powered by 40-120 psi standard shop air cycled on and off, PurgeX-® pump is available with spray nozzle that can be positioned within close proximity to machinery operating at high temperatures. Co-axial tubing delivers fluid and air to target area while keeping dispensing mechanism safe distance from heat source. Fluid and air are mixed at tip of compact nozzle, measuring less than 3/8 in....
Read More »
One Pint Reservoir suits outdoor environments.
Molded in single piece of translucent polypropylene, 1 Pint Reservoir resists elements making it suited for engines in outdoor equipment, generators, and general transport. Reservoir includes single piece molded plastic float switch and hand-rotated connection cap that adapts to differing engine designs and assembly processes. Venting system in cap permits air into reservoir and allows fluid to...
Read More »
Lubrication System optimizes CNC machinery operation.
Lubrication system, comprised of PurgeX-® dispensing technology, 3-way air solenoid, and polypropylene -½ gal reservoir with low-level switch, delivers continuous bath of lubricant to cutting surfaces during CNC operations as well as moving parts of internal machinery. Featuring 4 in. aluminum body, PurgeX offers mechanics necessary for precise and repeatable lubrication cycles. Adjustment...
Read More »Spray Unit produces controlled, predictable results.
Based on PurgeX-® technology, Spray Unit utilizes positive displacement pumps in high-speed alternating pattern to produce sustained spray. Pumps are 4 in. tall and cycle with aid of compressed air. Volume and frequency of dispensing is adjustable by operator. In addition to PurgeX pumps, spray unit comes equipped with 4-way air solenoid, timer, air regulator, and air gauge. It is suited for...
Read More »
Level Gauge provides maximum liquid visibility.
Mounted flush to tank, Broad View Level Gauge features nylon viewing area of 1-¾ in. across in lengths from 3-36 in., allowing unobstructed view from 3 visible surfaces. Upper and lower entry points of tank equalize atmospheric conditions within internal chambers of gauge, ensuring level of liquid in gauge is at exact height of liquid in tank. Gauge is suited for monitoring liquid levels from...
Read More »Sight Feed Valves come in variety of patterns.
Suited for pressure or gravity lubricating systems where small quantities of liquid are to be drop fed, sight feed valves are constructed with plated steel or aluminum alloy bodies. Sight viewing glass is held between 2 gaskets, and needle valve regulates liquid flow. Design allows for fine adjustments, and friction lock retains setting. Furnished with Buna N seals, products come in angle, cross,...
Read More »
Liquid Level Gages offer adjustable centerlines.
Compensating for variances that can occur during production of plastic tanks, nylon liquid level gages accommodate centerline distances up to -¼ in. longer or shorter than specified measurement for total adjustability of -½ in. Adjustment can be made by hand, facilitating installation, and features include round Trogamid nylon sight that is clear and durable. Gages are available with centerline...
Read More »
Industrial Fluid Reservoirs offer maximum fluid visibility.
Designed with molded polycarbonate endplates, Clear View Reservoirs eliminate need for gaskets and center post to tie together top and bottom plates, maximizing fluid visibility. Swivel fill cap keeps cap attached but out of way during filling. Available in multiple outlet configurations and in remote or pipe mounting designs, reservoirs come in Pyrex or acrylic with capacities of 2 -½ oz, 5 oz,...
Read More »
Spray Dispenser maximizes uptime via continuous operation.
Intended for continuously operating machinery, auto-fill spray dispenser uses alternating reservoirs in controlled sequence to attain always-on status. Fully automated unit provides constant source of pressurized fluid. When one reservoir is pressurized and dispensing, other reservoir is depressurized and refilled to eliminate need for attendant and periodic shutdowns. PLC controlled dispenser...
Read More »Lubricator distributes oil to hundreds of lube points.
Able to distribute oil to as few as 12 and as many as hundreds of points, Hydracision-® combines hydraulic movement of fluid with positive displacement injection. System provides frequent, small doses of lubricant, allowing oil to reach critical areas when needed with little or no run-off or waste. Self-contained package consists of- clear polycarbonate fluid reservoir, in standard 2 L size,...
Read More »Positive Displacement Pump offers high-temperature nozzle.
Powered by 40-120 psi standard shop air cycled on and off, PurgeX-® pump is available with spray nozzle that can be positioned within close proximity to machinery operating at high temperatures. Co-axial tubing delivers fluid and air to target area while keeping dispensing mechanism safe distance from heat source. Fluid and air are mixed at tip of compact nozzle, measuring less than 3/8 in....
Read More »
One Pint Reservoir suits outdoor environments.
Molded in single piece of translucent polypropylene, 1 Pint Reservoir resists elements making it suited for engines in outdoor equipment, generators, and general transport. Reservoir includes single piece molded plastic float switch and hand-rotated connection cap that adapts to differing engine designs and assembly processes. Venting system in cap permits air into reservoir and allows fluid to...
Read More »
Lubrication System optimizes CNC machinery operation.
Lubrication system, comprised of PurgeX-® dispensing technology, 3-way air solenoid, and polypropylene -½ gal reservoir with low-level switch, delivers continuous bath of lubricant to cutting surfaces during CNC operations as well as moving parts of internal machinery. Featuring 4 in. aluminum body, PurgeX offers mechanics necessary for precise and repeatable lubrication cycles. Adjustment...
Read More »Spray Unit produces controlled, predictable results.
Based on PurgeX-® technology, Spray Unit utilizes positive displacement pumps in high-speed alternating pattern to produce sustained spray. Pumps are 4 in. tall and cycle with aid of compressed air. Volume and frequency of dispensing is adjustable by operator. In addition to PurgeX pumps, spray unit comes equipped with 4-way air solenoid, timer, air regulator, and air gauge. It is suited for...
Read More »
Level Gauge provides maximum liquid visibility.
Mounted flush to tank, Broad View Level Gauge features nylon viewing area of 1-¾ in. across in lengths from 3-36 in., allowing unobstructed view from 3 visible surfaces. Upper and lower entry points of tank equalize atmospheric conditions within internal chambers of gauge, ensuring level of liquid in gauge is at exact height of liquid in tank. Gauge is suited for monitoring liquid levels from...
Read More »NEW Brochure on PurgeX® Turn Key Packages
Oil-Rite's new brochure on PurgeX-® Turn Key Packages is available on request. The brochure covers a complete line of centralized lubrication systems that are ready to install based on Oil-Rite's 73 years of experience in the field. The brochure provides explicit detail on dimensions, specifications, and engineering data. The new metering systems have been designed around Oil-Rite's patented...
Read More »