Dylon Industries, Inc.

Ceramic Cement may be used in temperatures over 1000°F.
Adhesives & Sealants

Ceramic Cement may be used in temperatures over 1000°F.

Suited for use in electronic devices, Grade C-3 single-component, polysilicate-based cement acts as electrical insulator and bonds to any clean wettable surface. Chemical-setting, inorganic cement exhibits dimensional stability, allowing less than 1% shrinkage at temperatures up to 1,093°C. Resistant to thermal shock, asbestos-free product is stable in hostile gaseous environments and will...

Read More »
Graphite Coating can be applied to surfaces up to 1,000°F.
Paints & Coatings

Graphite Coating can be applied to surfaces up to 1,000°F.

Brushed, sprayed, or dipped on surfaces, Grade AA Ultra Graphite Coating is smooth and slippery when dried and has high electrical and thermal conductivity. It will not crack or melt and produces no odors, smoke, or pollution. Water-based product serves as release agent since most molten metals, quartz, glass, concrete, and ceramics will not stick to its surface. When no longer needed, coating...

Read More »
Adhesives & Sealants

Heat Conductive Compound offers broad temperature range.

With temperature range of -250 to +1,750°F, graphite-filled, putty-like Thermatrace TC optimizes thermal efficiency of steam tracers, heating tapes, coils, and stripes. Cured compound is water resistant, as well as resistant to acid fumes and salts, and unaffected by oils, greases, and organic solvents. There are no toxic materials or off gases. Applied by trowel or pneumatic pump,...

Read More »
Lubricants

Protective Coating is non-carbonizing and ashless.

Anti-Seize features multi-sized polished copper flakes and natural graphite in synthetic base that provides corrosion barrier between dissimilar metals, stainless steel, and other metals. Product provides protection against galling, rusting, and heat bonding in extreme heat and pressure, even after exposure up to 1,850°F. No mixing is required, and Anti-Seize will not harden, separate, or...

Read More »
Lubricants

Forging Lubricant withstands ultra-high temperatures.

Designed to forge warm or hot ferrous, super alloy, and powder metal parts, Dyforge 880 can wet dies with temperatures from 150-1,300°F. Water-based colloidal formula contains micro-fine graphite and binder additive package. It provides stability in both concentrated and diluted versions, and can be spray applied to dies for uniform coating and control of metal movement.

Read More »
Adhesives & Sealants

Compounds blend epoxy and graphite for strong bonds.

Two-component Grade RX offers pot life of 3Â-½ hr at room temperature and set time of 6-8 hr without additional heat, while single-component Grade PX consists of heavy paste that must be cured for 30 min at 285-315°F. Both can be used as heat conductive compounds or electrically conductive adhesives. Products can be used to manufacture heat sinks, bond materials for minimum heat loss,...

Read More »
Lubricants

Synthetic Lubricant forges difficult non-ferrous metals.

Engineered for those forging high-silicon aluminum alloys, non-graphite, water-based Grade FW-3777 eliminates flash fire and minimizes smoke and undesirable odors in forging applications. It does not build up in die cavities and provides optimal metal movement and anti-solder properties. Product dilutes with water, and there is no settling of concentrate, and no mixing required. When...

Read More »
Paints & Coatings

Graphite Release Coating handles temperatures to 3,000°C.

Water-based Grade AE, applied to metal, wood, concrete, plastic, glass, or ceramic surface, dries into smooth, non-porous graphite layer. Electrically and thermally conductive paint can be used as dry lubricant or as anti-stick agent in oxidizing environments to 500°C and in reducing or inert atmospheres to 3,000°C. Able to be removed by cold water, non-toxic product will not crack, run, or...

Read More »

Graphite Cement creates bonds stronger than substrates.

Grade GC joins all forms of rigid, flexible, and machined carbon and graphite shapes. It cures to 100% carbonaceous bond with thermal conductivity and remains secure to 5,432°F in non-oxidizing atmosphere. When used as joint compound for furnace electrodes, it locks joint and lowers joint electrical resistivity. Product may also be used to repair cracked, chipped, or broken graphite trays,...

Read More »

Leak Detector Fluid finds leaks as small as 1 ft³/year.

Instant-acting Dylon Leak Detector is medium-viscosity, blue fluid that locates leaks in pressurized gas lines. Applied to suspected leak areas, product produces foam of live bubbles at source of gas leak. It is formulated to expose gas leaks in joints, fittings, tubing, gaskets, flanges, seals, pipe, and instrument lines. Offered in 4 oz polyethylene squeeze bottles with 1 in. spout, product...

Read More »
Ceramic Cement may be used in temperatures over 1000°F.
Adhesives & Sealants

Ceramic Cement may be used in temperatures over 1000°F.

Suited for use in electronic devices, Grade C-3 single-component, polysilicate-based cement acts as electrical insulator and bonds to any clean wettable surface. Chemical-setting, inorganic cement exhibits dimensional stability, allowing less than 1% shrinkage at temperatures up to 1,093°C. Resistant to thermal shock, asbestos-free product is stable in hostile gaseous environments and will...

Read More »
Graphite Coating can be applied to surfaces up to 1,000°F.
Paints & Coatings

Graphite Coating can be applied to surfaces up to 1,000°F.

Brushed, sprayed, or dipped on surfaces, Grade AA Ultra Graphite Coating is smooth and slippery when dried and has high electrical and thermal conductivity. It will not crack or melt and produces no odors, smoke, or pollution. Water-based product serves as release agent since most molten metals, quartz, glass, concrete, and ceramics will not stick to its surface. When no longer needed, coating...

Read More »
Adhesives & Sealants

Heat Conductive Compound offers broad temperature range.

With temperature range of -250 to +1,750°F, graphite-filled, putty-like Thermatrace TC optimizes thermal efficiency of steam tracers, heating tapes, coils, and stripes. Cured compound is water resistant, as well as resistant to acid fumes and salts, and unaffected by oils, greases, and organic solvents. There are no toxic materials or off gases. Applied by trowel or pneumatic pump,...

Read More »
Lubricants

Protective Coating is non-carbonizing and ashless.

Anti-Seize features multi-sized polished copper flakes and natural graphite in synthetic base that provides corrosion barrier between dissimilar metals, stainless steel, and other metals. Product provides protection against galling, rusting, and heat bonding in extreme heat and pressure, even after exposure up to 1,850°F. No mixing is required, and Anti-Seize will not harden, separate, or...

Read More »
Lubricants

Forging Lubricant withstands ultra-high temperatures.

Designed to forge warm or hot ferrous, super alloy, and powder metal parts, Dyforge 880 can wet dies with temperatures from 150-1,300°F. Water-based colloidal formula contains micro-fine graphite and binder additive package. It provides stability in both concentrated and diluted versions, and can be spray applied to dies for uniform coating and control of metal movement.

Read More »
Adhesives & Sealants

Compounds blend epoxy and graphite for strong bonds.

Two-component Grade RX offers pot life of 3Â-½ hr at room temperature and set time of 6-8 hr without additional heat, while single-component Grade PX consists of heavy paste that must be cured for 30 min at 285-315°F. Both can be used as heat conductive compounds or electrically conductive adhesives. Products can be used to manufacture heat sinks, bond materials for minimum heat loss,...

Read More »
Lubricants

Synthetic Lubricant forges difficult non-ferrous metals.

Engineered for those forging high-silicon aluminum alloys, non-graphite, water-based Grade FW-3777 eliminates flash fire and minimizes smoke and undesirable odors in forging applications. It does not build up in die cavities and provides optimal metal movement and anti-solder properties. Product dilutes with water, and there is no settling of concentrate, and no mixing required. When...

Read More »
Paints & Coatings

Graphite Release Coating handles temperatures to 3,000°C.

Water-based Grade AE, applied to metal, wood, concrete, plastic, glass, or ceramic surface, dries into smooth, non-porous graphite layer. Electrically and thermally conductive paint can be used as dry lubricant or as anti-stick agent in oxidizing environments to 500°C and in reducing or inert atmospheres to 3,000°C. Able to be removed by cold water, non-toxic product will not crack, run, or...

Read More »

Graphite Cement creates bonds stronger than substrates.

Grade GC joins all forms of rigid, flexible, and machined carbon and graphite shapes. It cures to 100% carbonaceous bond with thermal conductivity and remains secure to 5,432°F in non-oxidizing atmosphere. When used as joint compound for furnace electrodes, it locks joint and lowers joint electrical resistivity. Product may also be used to repair cracked, chipped, or broken graphite trays,...

Read More »

Leak Detector Fluid finds leaks as small as 1 ft³/year.

Instant-acting Dylon Leak Detector is medium-viscosity, blue fluid that locates leaks in pressurized gas lines. Applied to suspected leak areas, product produces foam of live bubbles at source of gas leak. It is formulated to expose gas leaks in joints, fittings, tubing, gaskets, flanges, seals, pipe, and instrument lines. Offered in 4 oz polyethylene squeeze bottles with 1 in. spout, product...

Read More »

All Topics