Hendrickson USA, L.L.C
Woodridge, IL 60517-4904
New STEERTEK NXT Front Steer Axle for Medium-Duty Truck Models
Designed for saves weight compared to traditional I-beam axles while combining rigid strength. Provides maneuverability due to 55 degrees of wheel cut and reduced maintenance. Available in capacities from 8,000 to 14,600 lbs.
Read More »
New ULTIMAAX Suspension Offers GVW Rating More Than 52 K
Available in capacities of 46,000, 52,000, 60,000 and 70,000 pounds. Ideal for fleets that need improved stability, handling and ride quality applications.
Read More »
New Heavy-Duty Rubber Suspension Offers Ideal Balance of Unloaded Ride Quality and Loaded Stability
Features equalizing beam that distributes the load equally between both axles in off-road and uneven terrain conditions. Optimized to provide increased site rating, expanded capacity ranges, and improved durability. Designed for vocational applications where durability and performance are essential.
Read More »
Hendrickson Supplies E-One with Suspensions for the Air Transportable ARFF Vehicle for the U.S. Air Force
WOODRIDGE, IL & OCALA, FL – Hendrickson Truck Commercial Vehicle Systems and E-ONE, a subsidiary of REV Group, announced the start of deliveries to the United States Air Force of the newly designed E-ONE TITAN® 4×4 Air Transportable (AT) ARFF P-19C vehicle equipped with Hendrickson’s Long Travel Trailing Arm Suspension. E-ONE’s contract is currently for 49 air transportable ARFF vehicles....
Read More »
New Front Steer Axles Come with Service Interval of 40,000 Miles
Include 10K and 12K capacities for the medium duty truck and bus segments. Ideal for International® MV™ trucks and IC Bus® CE Series buses that is approved for on-highway and medium duty truck bus, and motor home applications. Available in capacities from 10,000 to 14,600 lbs. per axle.
Read More »
Hendrickson Offers New ULTIMAAX Rubber Suspension for Vocational and Severe-Duty Applications
The ULTIMAAX™ Rubber Suspensions are available in capacities of 46,000 through 52,000 lbs. The products are suitable for use in severe-duty environments where vehicles encounter harsh and unexpected ground conditions. These suspensions are offered with the integration of walking (equalizing) beam technology and progressive rate spring for a balanced load stability and unloaded ride quality.
Read More »
Rear Air Suspension has 10,000 lb rated capacity.
Designed and manufactured for cut away bus and specialty vehicle market, 10,000 lb capacity COMFORT AIR is configured to improve driver feel and predictable handling when performing maneuvers. Air springs and shock absorbers work together to adjust to changing road conditions and promote passenger comfort. Also included, kneeling function enables bus to lower 3.5 in. to aid passenger entry and...
Read More »
Durable Truck Suspension/Steer Axle conserves weight and fuel.
As available option for Peterbilt 579 and 567 set forward axle models,- SOFTEK-® NXT integrated monoleaf suspension and steer axle system combines STEERTEK NXT axle and monoleaf spring technology with integrated clamp group design. Design conserves weight,- promotes ride quality and durability, and facilitates maintenance. Axle, with- 2-piece knuckle assembly,- also includes double lip...
Read More »Aluminum Bumper features stainless steel finish.
Available for International-® HX Series trucks, AERO CLAD-® offers bright metal bumper option for both set back axle and set forward axle models.- Stainless steel finish is 10x thicker than chrome plating and provides mirror bright surface that resists corrosion, even after damage from impact. Tough- finish will not crack, peel, rust, or fade. Saving 52 lb compared to standard painted steel...
Read More »Stainless Steel Clad Aluminum Bumper replaces plastic bumpers.
Offered as stainless steel clad aluminum bumper for International-® ProStar-®, All Makes AERO CLAD-® replaces 3-piece plastic bumpers on trucks built February 2015 and later without negatively affecting fuel efficiency. Product, which- includes fixed mount bumper brackets and plastic bumper-to-hood trim, offers appearance and finish of chrome, is corrosion resistant, and is less weight than...
Read More »
New STEERTEK NXT Front Steer Axle for Medium-Duty Truck Models
Designed for saves weight compared to traditional I-beam axles while combining rigid strength. Provides maneuverability due to 55 degrees of wheel cut and reduced maintenance. Available in capacities from 8,000 to 14,600 lbs.
Read More »
New ULTIMAAX Suspension Offers GVW Rating More Than 52 K
Available in capacities of 46,000, 52,000, 60,000 and 70,000 pounds. Ideal for fleets that need improved stability, handling and ride quality applications.
Read More »
New Heavy-Duty Rubber Suspension Offers Ideal Balance of Unloaded Ride Quality and Loaded Stability
Features equalizing beam that distributes the load equally between both axles in off-road and uneven terrain conditions. Optimized to provide increased site rating, expanded capacity ranges, and improved durability. Designed for vocational applications where durability and performance are essential.
Read More »Motor Wheel Launches New Website.
WOODRIDGE, Ill. (October 2020) – Hendrickson recently announced the acquisition of the Motor Wheel brake drum & Crewson slack adjuster business segments, from STEMCO® and parent company EnPro Industries. “We are excited about this acquisition and the rich American heritage of Motor Wheel. We have been working to revitalize the Motor Wheel name with a new brand mark, a tagline...
Read More »Hendrickson Available Next Western Star Truck
Hendrickson Suspensions Available on the Next Western Star Truck Woodridge, Ill. (October 2020) – Hendrickson Truck Commercial Vehicle Systems announced today that it has partnered with Western Star Trucks to offer a comprehensive premium rear suspension portfolio as a part of the chassis enhancements of the Western Star 49X. The suspension offerings include the introduction of HAULMAAX® EX...
Read More »Hendrickson Acquires Business from STEMCO®
Woodridge, Ill. (August 2020) – Hendrickson acquires the Motor Wheel Brake Drum & Crewson slack adjuster business segments, based in Chattanooga TN and Berea KY, from STEMCO® and parent company EnPro Industries. The business segments will operate as a division of Hendrickson Truck Commercial Vehicle Systems. The Motor Wheel & Crewson names will be kept and used as a product name going...
Read More »
Hendrickson Supplies E-One with Suspensions for the Air Transportable ARFF Vehicle for the U.S. Air Force
WOODRIDGE, IL & OCALA, FL – Hendrickson Truck Commercial Vehicle Systems and E-ONE, a subsidiary of REV Group, announced the start of deliveries to the United States Air Force of the newly designed E-ONE TITAN® 4×4 Air Transportable (AT) ARFF P-19C vehicle equipped with Hendrickson’s Long Travel Trailing Arm Suspension. E-ONE’s contract is currently for 49 air transportable ARFF vehicles....
Read More »
New Front Steer Axles Come with Service Interval of 40,000 Miles
Include 10K and 12K capacities for the medium duty truck and bus segments. Ideal for International® MV™ trucks and IC Bus® CE Series buses that is approved for on-highway and medium duty truck bus, and motor home applications. Available in capacities from 10,000 to 14,600 lbs. per axle.
Read More »Hendrickson Announces Organizational Changes
WOODRIDGE, Ill. (January 13, 2020) – Hendrickson announces today Matt Joy has been promoted to the position of Chief Operating Officer. Joy most recently was Vice President and General Manager of our Truck group with previous roles of VP/GM Specialty Product Group and Vice President of Finance. In this new role, Joy will have the responsibility for all Divisions: Truck Commercial Vehicle...
Read More »Hendrickson Expands Trailer Commercial Vehicle Systems Operations
Woodridge, Ill. (April 2019) – Hendrickson is expanding their Trailer Commercial Vehicle Systems operations in Northeastern Ohio. 35 acres were purchased from the more than 325-acre parcel of the Stark County Farm property. This new 35-acre plot will be home to Hendrickson’s sixth trailer suspension plant. “This $50 million, state-of-the-art facility will support local and Canadian...
Read More »