UV Process Supply, Inc
Chicago, IL 60614
Calorimeter ensures batch-to-batch curing consistency.
Featuring nominal sensitivity of 3.0 Ã-µV/BTU/ftÃ-²-hr, TFC-9000(TM) Thin Film Calorimeter quantitatively measures curability of inks, coatings, and adhesives. Pushbutton-initiated process measures exothermic heat reaction from polymerizing sample and analyzes incoming data. Test measures shelf life of stored inks and evaluates older inks to determine if they still perform to...
Read More »UV Curing Lamp covers expansive area.
CON-TROL-CUREÃ-® Wide Area Flood Curing Lamp casts even irradiance over wide area. Placed at distance of 3 ft from material to be cured, unit projects effective cure area of greater than 5 x 5 ft. Fitted with adjustable lamp holders, housing accommodates lamps with total power from 250-1,000 W. Built in cooling system supplies correct amount of airflow to keep lamp at stable temperature. Lamp...
Read More »
UV Strips and Labels provide visual indication of UV dose.
UV FastCheck(TM) Strips are used to determine levels of accumulated UV dose via visual inspection of 5 separate color changing zones. Made from same material, UV Intensity Labels operate on same color changing principle but display UV dose accumulation via 1 color changing zone. They measure UV doses from 0 mJ/cm-² to greater than 5,000 mJ/cm-². Strips measure 2 1/8 x -½ in., while labels...
Read More »
UV Intensity Labels
CON-TROL-CURE-® Labels are paper-thin, photochromatic, pressure-sensitive labels that change color upon receiving UV dose. Color change enables comparison to dose chart representing UV dose in millijoules. Once label has changed color, it will not continue to change unless exposed to more UV, and is not subject to increasing color changes at elevated temperatures. Labels are suited for web...
Read More »Photochromatic Strips measure UV light dosage.
Paper-thin, pressure-sensitive UV FastCheck(TM) Strips change color when specific levels of UV dose are received. With 5 separate color changing zones, products provide visual inspection of UV light dosage to determine power of UV light source at specific location. Strips measure UV doses from 0-1,500 mJ/cmÃ-² and can be used in all narrow web environments. Included chart lets users compare...
Read More »
Spectrodensitometer measures density/colorimetry functions.
X-Rite 528 combines capabilities of densitometer and colorimeter into single unit. On 4-color jobs, it provides density, dot gain, trap, print contrast, gray balance, and hue error functions. Users can switch on-the-fly to colorimetry functions when quality control for pastels, Hi-Fi, and PANTONE-® is needed. Users can measure up to 24 references and select type of comparison for each....
Read More »
Color Density Meter suits pressroom QC applications.
Designed for monitoring quality in print jobs, X-Rite 508 Spectrodensitometer (M003-021) measures GATF proofing bars, QuarkXPressÃ-® color bars, and Ugra/Fogra color control elements. It also includes 4-color newsprint functions and lets user select measurement aperture of microspot 1.6 x 3.2 mm, small 2.0 mm, medium 3.4 mm, or large 6.0 mm. Operated via interactive menu and key system,...
Read More »
Radiometers have compact 5.5 in. dia x -½ in. high design.
Diskure(TM) 4Scan Radiometers are equipped with 3 UV sensors for individual measuring of UV-A/B/C and total UV. Ability to measure and display UV intensity and UV dose lets users determine total energy and how that energy is delivered. Models include base model, Diskure 4Scan (M007-111); Diskure 4Scan-C, which adds USB port; Diskure 4Scan-T (M007-113), which adds temperature sensor; and Diskure...
Read More »
Dot Meters capture and adjust images with one button.
Equipped with ccDot engine and graphic display, X-RiteDot portable dot-analysis instruments provide digital screen ruling assessment, on-board video dot magnification, and dot shape analysis on any media. They adjust for plate background image and feature 14,000 dpi optics. This allows measurement of AM amplitude modulated screens from 85-250 LPI as well as FM frequency modulated screens as fine...
Read More »
Pass-Through UV Radiometer is available in four versions.
Hand-held UV-Profiler-3000(TM) measures UV from 250-410 nm, has color viewing screen, and comes with one UV sensor and one temperature sensor. UV-T Profiler series has no onboard viewing screen, but is offered in 4 UV ranges that collectively cover 230-410 nm. Equipped with 3 UV sensors, UV-3C can simultaneously measure UV-A, UV-B, UV-C, and full UV. Model UV-3C-T Profiler radiometer offers...
Read More »Quantitative Analysis of UV LED Performance by the TFC-9000(TM)
CHICAGO, December 28, 2005 - The CON-TROL-CURE Thin Film Calorimeter (TFC-9000(TM)) measures the curability of inks, coatings and adhesives and ensures that they are curing consistently, batch-to-batch. A need was identified to be able to accurately measure curing effectiveness when using different UV LED wavelengths. So, UV Process Supply developed a procedure using the TFC-9000(TM) to...
Read More »Calorimeter ensures batch-to-batch curing consistency.
Featuring nominal sensitivity of 3.0 Ã-µV/BTU/ftÃ-²-hr, TFC-9000(TM) Thin Film Calorimeter quantitatively measures curability of inks, coatings, and adhesives. Pushbutton-initiated process measures exothermic heat reaction from polymerizing sample and analyzes incoming data. Test measures shelf life of stored inks and evaluates older inks to determine if they still perform to...
Read More »UV Process Supply Releases 'Maintaining UV Curing Equipment' Manual
CHICAGO, September 19, 2005 - UV curing can be a challenging, complicated endeavor-especially when things aren't going as planned. The answer to why isn't this working? can be an overwhelming one when ongoing preventative maintenance hasn't been a priority. The most effective way to solve many UV curing dilemmas is by avoiding them in the first place. To help users figure out what they need to do...
Read More »UV Curing Lamp covers expansive area.
CON-TROL-CUREÃ-® Wide Area Flood Curing Lamp casts even irradiance over wide area. Placed at distance of 3 ft from material to be cured, unit projects effective cure area of greater than 5 x 5 ft. Fitted with adjustable lamp holders, housing accommodates lamps with total power from 250-1,000 W. Built in cooling system supplies correct amount of airflow to keep lamp at stable temperature. Lamp...
Read More »
UV Strips and Labels provide visual indication of UV dose.
UV FastCheck(TM) Strips are used to determine levels of accumulated UV dose via visual inspection of 5 separate color changing zones. Made from same material, UV Intensity Labels operate on same color changing principle but display UV dose accumulation via 1 color changing zone. They measure UV doses from 0 mJ/cm-² to greater than 5,000 mJ/cm-². Strips measure 2 1/8 x -½ in., while labels...
Read More »
UV Intensity Labels
CON-TROL-CURE-® Labels are paper-thin, photochromatic, pressure-sensitive labels that change color upon receiving UV dose. Color change enables comparison to dose chart representing UV dose in millijoules. Once label has changed color, it will not continue to change unless exposed to more UV, and is not subject to increasing color changes at elevated temperatures. Labels are suited for web...
Read More »Photochromatic Strips measure UV light dosage.
Paper-thin, pressure-sensitive UV FastCheck(TM) Strips change color when specific levels of UV dose are received. With 5 separate color changing zones, products provide visual inspection of UV light dosage to determine power of UV light source at specific location. Strips measure UV doses from 0-1,500 mJ/cmÃ-² and can be used in all narrow web environments. Included chart lets users compare...
Read More »
Spectrodensitometer measures density/colorimetry functions.
X-Rite 528 combines capabilities of densitometer and colorimeter into single unit. On 4-color jobs, it provides density, dot gain, trap, print contrast, gray balance, and hue error functions. Users can switch on-the-fly to colorimetry functions when quality control for pastels, Hi-Fi, and PANTONE-® is needed. Users can measure up to 24 references and select type of comparison for each....
Read More »
Color Density Meter suits pressroom QC applications.
Designed for monitoring quality in print jobs, X-Rite 508 Spectrodensitometer (M003-021) measures GATF proofing bars, QuarkXPressÃ-® color bars, and Ugra/Fogra color control elements. It also includes 4-color newsprint functions and lets user select measurement aperture of microspot 1.6 x 3.2 mm, small 2.0 mm, medium 3.4 mm, or large 6.0 mm. Operated via interactive menu and key system,...
Read More »
Radiometers have compact 5.5 in. dia x -½ in. high design.
Diskure(TM) 4Scan Radiometers are equipped with 3 UV sensors for individual measuring of UV-A/B/C and total UV. Ability to measure and display UV intensity and UV dose lets users determine total energy and how that energy is delivered. Models include base model, Diskure 4Scan (M007-111); Diskure 4Scan-C, which adds USB port; Diskure 4Scan-T (M007-113), which adds temperature sensor; and Diskure...
Read More »