Bertsche Engineering Corp.

The Bertsche Two-in-One P5 Mill
Laboratory and Research Supplies and Equipment

The Bertsche Two-in-One P5 Mill

The Customer's Challenge: Significant new business, order intake New customers Steeply rising monthly production rates Building/Facility space constraints Solution: The Bertsche Two-in-One P5 Mill Our aerospace customer was faced with the choice of either building a new facility to house two new milling machines or splitting their production between two manufacturing sites. Bertsche developed...

Read More »
Bertsche Machining Center Boosts Hitco CFRP Floor Beam Production by 400%
Communication Systems & Equipment

Bertsche Machining Center Boosts Hitco CFRP Floor Beam Production by 400%

Hitco Carbon Composites was selected as one of the suppliers to Boeing 787 program for floor beams manufactured from CFRP. Hitco is one of hand full of manufacturers, worldwide that has the capability of manufacturing complex (laid up) CFRP (carbon fiber reinforced plastic) aerospace structural parts and final machining the parts for direct delivery to point of use". Specific to the manufacture...

Read More »
New Waterjet Deburring/Cleaning/Rust Inhbiting System Saves Space and Capital
Cleaning Products & Equipment

New Waterjet Deburring/Cleaning/Rust Inhbiting System Saves Space and Capital

Canadian automotive part supplier realizes significant gains with Bertsche-designed multi-function system in its plant With factory floor space at a premium and capital equipment funds scarce, Linamar, a Tier One Canadian automotive part supplier, turned to Bertsche Engineering recently for an all-in-one part deburring, final rinse and drying solution. Typically, complex machined automotive parts...

Read More »
Deburr and Washing System offers pressure up to 5,000 psi.

Deburr and Washing System offers pressure up to 5,000 psi.

Able to handle parts up to 300 x 300 x 200 mm, multi-station iJet CNC High Pressure System completely washes, removes chip burrs, rinses clean, and dries 6 faces of parts. Four axis part handler transports part over series of single point horizontal and vertical rotary lance nozzles for single feature deburring and to manifold stations for multiple feature deburring and cleaning. System is...

Read More »
Machining Center suits high-volume environments.
Communication Systems & Equipment

Machining Center suits high-volume environments.

With 2 independently operating 3-axis spindle modules, Xi-Mill with 3 x 3 MM option is capable of working interchangeably as single and dual work zone machine. Based on raised bed design with twin carriages, machine offers rapid traverse of 2,362 ipm, acceleration of 0.5 g, and direct-drive 15,000 rpm 30 hp motor spindle for handling wide variety of materials. X-axis travel starts at 157 in. with...

Read More »
CNC Machining Center works at speeds to 60 m/min.
Communication Systems & Equipment

CNC Machining Center works at speeds to 60 m/min.

DFT X-Mill multi-tasking VMC features monolithic bed with dual stationary tables, high back wall swarf containment compartment, and raised bed for single- or twin-spindle modules that move spindle in all 3 axes. Tool Centered Feed Force design arrangement centers axis feed force line of action on cutting tool, and bed design allows long and short part machining in single or dual work-zone mode....

Read More »
The Bertsche Two-in-One P5 Mill
Laboratory and Research Supplies and Equipment

The Bertsche Two-in-One P5 Mill

The Customer's Challenge: Significant new business, order intake New customers Steeply rising monthly production rates Building/Facility space constraints Solution: The Bertsche Two-in-One P5 Mill Our aerospace customer was faced with the choice of either building a new facility to house two new milling machines or splitting their production between two manufacturing sites. Bertsche developed...

Read More »
Bertsche Machining Center Boosts Hitco CFRP Floor Beam Production by 400%
Communication Systems & Equipment

Bertsche Machining Center Boosts Hitco CFRP Floor Beam Production by 400%

Hitco Carbon Composites was selected as one of the suppliers to Boeing 787 program for floor beams manufactured from CFRP. Hitco is one of hand full of manufacturers, worldwide that has the capability of manufacturing complex (laid up) CFRP (carbon fiber reinforced plastic) aerospace structural parts and final machining the parts for direct delivery to point of use". Specific to the manufacture...

Read More »
New Waterjet Deburring/Cleaning/Rust Inhbiting System Saves Space and Capital
Cleaning Products & Equipment

New Waterjet Deburring/Cleaning/Rust Inhbiting System Saves Space and Capital

Canadian automotive part supplier realizes significant gains with Bertsche-designed multi-function system in its plant With factory floor space at a premium and capital equipment funds scarce, Linamar, a Tier One Canadian automotive part supplier, turned to Bertsche Engineering recently for an all-in-one part deburring, final rinse and drying solution. Typically, complex machined automotive parts...

Read More »
Deburr and Washing System offers pressure up to 5,000 psi.

Deburr and Washing System offers pressure up to 5,000 psi.

Able to handle parts up to 300 x 300 x 200 mm, multi-station iJet CNC High Pressure System completely washes, removes chip burrs, rinses clean, and dries 6 faces of parts. Four axis part handler transports part over series of single point horizontal and vertical rotary lance nozzles for single feature deburring and to manifold stations for multiple feature deburring and cleaning. System is...

Read More »
Machining Center suits high-volume environments.
Communication Systems & Equipment

Machining Center suits high-volume environments.

With 2 independently operating 3-axis spindle modules, Xi-Mill with 3 x 3 MM option is capable of working interchangeably as single and dual work zone machine. Based on raised bed design with twin carriages, machine offers rapid traverse of 2,362 ipm, acceleration of 0.5 g, and direct-drive 15,000 rpm 30 hp motor spindle for handling wide variety of materials. X-axis travel starts at 157 in. with...

Read More »
CNC Machining Center works at speeds to 60 m/min.
Communication Systems & Equipment

CNC Machining Center works at speeds to 60 m/min.

DFT X-Mill multi-tasking VMC features monolithic bed with dual stationary tables, high back wall swarf containment compartment, and raised bed for single- or twin-spindle modules that move spindle in all 3 axes. Tool Centered Feed Force design arrangement centers axis feed force line of action on cutting tool, and bed design allows long and short part machining in single or dual work-zone mode....

Read More »

All Topics