Index Corp.

MS40-8 Automatic Lathe Machine can be used as a double 4-spindle machine.
Machinery & Machining Tools

MS40-8 Automatic Lathe Machine can be used as a double 4-spindle machine.

MS40-8 Automatic Lathe Machine comes with 8 CNC spindles, two back-working spindles for rear-end machining with up to 18 CNC slides. Product is equipped with spindle drum with eight fluid-cooled motorized spindles that is rated to max 7,000 rpm, 24 kW, 57 Nm. Machine is suitable for off-center drilling, thread cutting, inclined drilling, cross drilling and contour milling and features an optional...

Read More »
TNL20 Sliding/Fixed Headstock Lathe features Xpanel i 4.0 control panel.
Machinery & Machining Tools

TNL20 Sliding/Fixed Headstock Lathe features Xpanel i 4.0 control panel.

TNL20 Sliding/Fixed Headstock Automatic Lathe is offered in TNL20-9 and TNL20-11 versions. TNL20-9 consists of nine linear axes, two turrets (max. 12,000 rpm), back working attachment and an autonomous counter spindle whereas TNL20-11 features extra front working attachment (max. 12,500 rpm). Unit comes with a vertical pallet storage device with 28 slots and an articulated arm. Product’s work...

Read More »
Universal Turning Machine features 2-turret design.
Agricultural & Farming Products

Universal Turning Machine features 2-turret design.

Featuring open work area, vertical cast iron machine bed, and simultaneous machining by upper and lower turrets, Model IT600 turns parts up to 600 mm long and 380 mm in diameter. System is equipped with 65 mm spindle providing up to 352 Nm torque and speeds to 4,000 rpm. Controlled by FANUC 32i model B with 10.4 in. TFT color display, machine includes Intelligent Y axis that permits surface...

Read More »
Automatic Lathe features B axis for machining at any angle.
Machinery & Machining Tools

Automatic Lathe features B axis for machining at any angle.

With extra B-axis in upper tool carrier that can pivot 100°, TRAUB TNL18-7B Sliding/Fixed Headstock Lathe can machine highly complex parts and complicated contour elements that also require additional operations such as milling or drilling, at any angular position. Tool turret indexing is carried out by NC rotary axis without mechanical lock, permitting free angle positioning of turret....

Read More »
Automatic Lathe features modular 8-spindle design.
Machinery & Machining Tools

Automatic Lathe features modular 8-spindle design.

Suitable for machining complex parts in industries ranging from automotive to medical technology, Multiline MS22C-8 can be configured to operate as 8-spindle machine, double 4-spindle machine, or machine with double rear end machining. Each of 8 spindles, arranged in spindle drum, are assigned 2 cross-slides which can travel on both X and Z-axis. Speed of liquid-cooled spindles can be controlled...

Read More »
Sliding Headstock Automatic Lathe suits Swiss, production turning.
Machinery & Machining Tools

Sliding Headstock Automatic Lathe suits Swiss, production turning.

Accommodating simultaneous use of up to 3 tools on 2 spindles, TRAUB TNL18 can be changed over in minutes to produce precision parts with or without guide bush for long/short parts from bar up to 20 mm dia. It delivers precision and qualified surface finish in one operation, and tool capacity can be increased to 54 places via dual- and multi-holders. Also available, TNL18P production machine...

Read More »
Turning/Milling Center handles 2 parts simultaneously.
Communication Systems & Equipment

Turning/Milling Center handles 2 parts simultaneously.

Featuring vertical cast machine bed with heavily ribbed, enclosed modular design, Model R200 utilizes two 18,000 rpm motorized milling spindles and 2 movable 5,000 rpm work spindles that perform machining operations in 2 independent subsystems, each capable of full 5-axis machining of bar stock to 65 mm. System offers B-axis swivel ranges of 270° and 230° and rapid traverse rate of 45...

Read More »
Production Turn-Mill Center handles medium-complexity parts.
Communication Systems & Equipment

Production Turn-Mill Center handles medium-complexity parts.

Along with choice of Fanuc 31i CNC or Siemens 840D CNC, C200 series offers 2 size options for main spindle and counterspindle with 65 and 90 mm bar capacity that respectively operate at 5,000 or 3,500 rpm. Up to 3 driven tools from 42 quick-change tool complement can work simultaneously, and INDEX-specific VDI interface ensures repetitive accuracies of ±8 microns up to 100 mm from mounting...

Read More »
Communication Systems & Equipment

CNC Production Turn-Mill handles fixed headstock work.

Equipped with three 14-position tool turrets and identical main and counterspindles, INDEX C100 series is designed for production of medium-complexity turned parts from 30-42 mm dia bar stock. Machine has various synchronized and simultaneous work capabilities as well as 42 quick-change tools, fixed and driven. While 30 mm bar capacity model comes with 9,000 rpm spindles, 42 mm bar capacity model...

Read More »
Machinery & Machining Tools

Mill-Turning Center may be equipped with 2, 3, or 4 turrets.

Featuring identical 37.5/32.2 hp main and counterspindles, Traub TNX65/42 Mill-Turning Center machines complex parts from bar diameters up to 2.60 in. and lengths up to 11.8 in. In addition to holding 10 live or fixed tools, each turret can travel 6.9 in. in X direction, 25.6 in. in Z direction, and optionally 1.57 in. in Y direction. Traub TNX65/42 can perform 2 dissimilar machining operations...

Read More »
MS40-8 Automatic Lathe Machine can be used as a double 4-spindle machine.
Machinery & Machining Tools

MS40-8 Automatic Lathe Machine can be used as a double 4-spindle machine.

MS40-8 Automatic Lathe Machine comes with 8 CNC spindles, two back-working spindles for rear-end machining with up to 18 CNC slides. Product is equipped with spindle drum with eight fluid-cooled motorized spindles that is rated to max 7,000 rpm, 24 kW, 57 Nm. Machine is suitable for off-center drilling, thread cutting, inclined drilling, cross drilling and contour milling and features an optional...

Read More »
TNL20 Sliding/Fixed Headstock Lathe features Xpanel i 4.0 control panel.
Machinery & Machining Tools

TNL20 Sliding/Fixed Headstock Lathe features Xpanel i 4.0 control panel.

TNL20 Sliding/Fixed Headstock Automatic Lathe is offered in TNL20-9 and TNL20-11 versions. TNL20-9 consists of nine linear axes, two turrets (max. 12,000 rpm), back working attachment and an autonomous counter spindle whereas TNL20-11 features extra front working attachment (max. 12,500 rpm). Unit comes with a vertical pallet storage device with 28 slots and an articulated arm. Product’s work...

Read More »
Universal Turning Machine features 2-turret design.
Agricultural & Farming Products

Universal Turning Machine features 2-turret design.

Featuring open work area, vertical cast iron machine bed, and simultaneous machining by upper and lower turrets, Model IT600 turns parts up to 600 mm long and 380 mm in diameter. System is equipped with 65 mm spindle providing up to 352 Nm torque and speeds to 4,000 rpm. Controlled by FANUC 32i model B with 10.4 in. TFT color display, machine includes Intelligent Y axis that permits surface...

Read More »
Automatic Lathe features B axis for machining at any angle.
Machinery & Machining Tools

Automatic Lathe features B axis for machining at any angle.

With extra B-axis in upper tool carrier that can pivot 100°, TRAUB TNL18-7B Sliding/Fixed Headstock Lathe can machine highly complex parts and complicated contour elements that also require additional operations such as milling or drilling, at any angular position. Tool turret indexing is carried out by NC rotary axis without mechanical lock, permitting free angle positioning of turret....

Read More »
Automatic Lathe features modular 8-spindle design.
Machinery & Machining Tools

Automatic Lathe features modular 8-spindle design.

Suitable for machining complex parts in industries ranging from automotive to medical technology, Multiline MS22C-8 can be configured to operate as 8-spindle machine, double 4-spindle machine, or machine with double rear end machining. Each of 8 spindles, arranged in spindle drum, are assigned 2 cross-slides which can travel on both X and Z-axis. Speed of liquid-cooled spindles can be controlled...

Read More »
Sliding Headstock Automatic Lathe suits Swiss, production turning.
Machinery & Machining Tools

Sliding Headstock Automatic Lathe suits Swiss, production turning.

Accommodating simultaneous use of up to 3 tools on 2 spindles, TRAUB TNL18 can be changed over in minutes to produce precision parts with or without guide bush for long/short parts from bar up to 20 mm dia. It delivers precision and qualified surface finish in one operation, and tool capacity can be increased to 54 places via dual- and multi-holders. Also available, TNL18P production machine...

Read More »
Turning/Milling Center handles 2 parts simultaneously.
Communication Systems & Equipment

Turning/Milling Center handles 2 parts simultaneously.

Featuring vertical cast machine bed with heavily ribbed, enclosed modular design, Model R200 utilizes two 18,000 rpm motorized milling spindles and 2 movable 5,000 rpm work spindles that perform machining operations in 2 independent subsystems, each capable of full 5-axis machining of bar stock to 65 mm. System offers B-axis swivel ranges of 270° and 230° and rapid traverse rate of 45...

Read More »
Production Turn-Mill Center handles medium-complexity parts.
Communication Systems & Equipment

Production Turn-Mill Center handles medium-complexity parts.

Along with choice of Fanuc 31i CNC or Siemens 840D CNC, C200 series offers 2 size options for main spindle and counterspindle with 65 and 90 mm bar capacity that respectively operate at 5,000 or 3,500 rpm. Up to 3 driven tools from 42 quick-change tool complement can work simultaneously, and INDEX-specific VDI interface ensures repetitive accuracies of ±8 microns up to 100 mm from mounting...

Read More »
Communication Systems & Equipment

CNC Production Turn-Mill handles fixed headstock work.

Equipped with three 14-position tool turrets and identical main and counterspindles, INDEX C100 series is designed for production of medium-complexity turned parts from 30-42 mm dia bar stock. Machine has various synchronized and simultaneous work capabilities as well as 42 quick-change tools, fixed and driven. While 30 mm bar capacity model comes with 9,000 rpm spindles, 42 mm bar capacity model...

Read More »
Machinery & Machining Tools

Mill-Turning Center may be equipped with 2, 3, or 4 turrets.

Featuring identical 37.5/32.2 hp main and counterspindles, Traub TNX65/42 Mill-Turning Center machines complex parts from bar diameters up to 2.60 in. and lengths up to 11.8 in. In addition to holding 10 live or fixed tools, each turret can travel 6.9 in. in X direction, 25.6 in. in Z direction, and optionally 1.57 in. in Y direction. Traub TNX65/42 can perform 2 dissimilar machining operations...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers