IMCO Carbide Tool Inc.
Perrysburg, OH 43551
End Mills suit machining of hi-temp alloys.
Featuring carbide core and 6 flutes with optimized rake and relief angles for maximum cutting engagement, INCONEX M8 Series is suitable for machining Inconel, Hastalloy, Waspalloy, and similar hi-temp alloys. All tools are made with corner radius to prevent chipping in strong metals. Designed to keep tools lubricated, AlCrNX coating protects cutting edges from intense heat generated in cutting...
Read More »
End Mills handle machining of hardened steels.
Suitable for machining hardened steels up to 58–62 HRC, running wet or dry, Omega M726 End Mills feature- 6 flutes, 50-
Read More »
IMCO Tool Helps Oilfield Instrument Maker Hit Paydirt - Again - Cutting Inconel Parts
M706 Series Omega-® end mill takes HEM toolpath for another productivity hike. PERRYSBURG, Ohio, USA - Gilbert Boquet (bō-kay) keeps his eyes open for new opportunities to shave time and tool costs, especially when the parts in production are made with 718 Inconel. This time, though, he went back to the IMCO M706 Series Omega end mills that had given him 400% more parts per tool in Inconel, and...
Read More »Customer Service: Turning a Moment of Truth into a Reason to Believe
PERRYSBURG, Ohio, USA - When you build something as massive as planes, maintaining production timelines is critical. One delay can set the entire project back months. And every project faces one sooner or later. When the timeline and the success of a project pivot on custom tools, the spotlight is on the supplier. It's show time. IMCO Carbide Tool, of Perrysburg, Ohio, experienced one of these...
Read More »End Mill has tough design for production environments.
Able to accommodate high-volume operations, POWoRoFEED-® M924 features reinforced cutting edges, which are resistant to chipping and wear, as well as AlCrNX engineered coating that imparts heat protection. Both features provide extended tool life, while free cutting action, optimized rake and relief angles, and 38-
Read More »New IMCO M525 End Mill, High-Efficiency Machining Form Dynamic Duo in Titanium, Stainless Steel
Higher feed rates in nasty-hard metals; test results in new enDURO-® catalog (Perrysburg, OH) - The nastiest metals on earth have met their match with the new enDURO-® M525 end mills, introduced this month with a 20-page catalog from IMCO Carbide Tool. Bred for higher feed rates in titanium and stainless steel, the M525 and its 5-flute variations have been tested in machine shops in both metals...
Read More »Five-Flute End Mills cut titanium and stainless steel.
Able to cut hard-to-machine metals such as superalloys, titanium, and stainless steel, enDURO-® 5-flute end mills maximize metal removal rates and productivity, and optimize finish in high-power and lower-power machining centers. They are designed with advanced geometries and specialized coatings for maximum cutting efficiency and precision, and are available in various end designs, shank...
Read More »
End Mills suit machining of hi-temp alloys.
Featuring carbide core and 6 flutes with optimized rake and relief angles for maximum cutting engagement, INCONEX M8 Series is suitable for machining Inconel, Hastalloy, Waspalloy, and similar hi-temp alloys. All tools are made with corner radius to prevent chipping in strong metals. Designed to keep tools lubricated, AlCrNX coating protects cutting edges from intense heat generated in cutting...
Read More »
End Mills handle machining of hardened steels.
Suitable for machining hardened steels up to 58–62 HRC, running wet or dry, Omega M726 End Mills feature- 6 flutes, 50-
Read More »
IMCO Tool Helps Oilfield Instrument Maker Hit Paydirt - Again - Cutting Inconel Parts
M706 Series Omega-® end mill takes HEM toolpath for another productivity hike. PERRYSBURG, Ohio, USA - Gilbert Boquet (bō-kay) keeps his eyes open for new opportunities to shave time and tool costs, especially when the parts in production are made with 718 Inconel. This time, though, he went back to the IMCO M706 Series Omega end mills that had given him 400% more parts per tool in Inconel, and...
Read More »Customer Service: Turning a Moment of Truth into a Reason to Believe
PERRYSBURG, Ohio, USA - When you build something as massive as planes, maintaining production timelines is critical. One delay can set the entire project back months. And every project faces one sooner or later. When the timeline and the success of a project pivot on custom tools, the spotlight is on the supplier. It's show time. IMCO Carbide Tool, of Perrysburg, Ohio, experienced one of these...
Read More »End Mill has tough design for production environments.
Able to accommodate high-volume operations, POWoRoFEED-® M924 features reinforced cutting edges, which are resistant to chipping and wear, as well as AlCrNX engineered coating that imparts heat protection. Both features provide extended tool life, while free cutting action, optimized rake and relief angles, and 38-
Read More »Imco's New System Makes Leap Forward in Customer-Friendly Product Information
PERRYSBURG, Ohio, USA - New product videos and new-generation catalogs hot off the presses, the latest wave of IMCO Carbide Tool's customer-focused product information system, are scheduled for introduction at EMO 2011 in Hannover, Germany, September 19-24. IMCO's comprehensive information system, in development since 2008, better represents the company's technological leadership and close...
Read More »New IMCO M525 End Mill, High-Efficiency Machining Form Dynamic Duo in Titanium, Stainless Steel
Higher feed rates in nasty-hard metals; test results in new enDURO-® catalog (Perrysburg, OH) - The nastiest metals on earth have met their match with the new enDURO-® M525 end mills, introduced this month with a 20-page catalog from IMCO Carbide Tool. Bred for higher feed rates in titanium and stainless steel, the M525 and its 5-flute variations have been tested in machine shops in both metals...
Read More »Award-Winning IMCO Tool Catalog Breaks New Ground
Magazine style puts emphasis on customers and performance Perrysburg, Ohio, USA - March 9, 2011 - Machine tool catalogs typically don't receive design and marketing awards, but, as IMCO Carbide Tool of Perrysburg, Ohio, proved late in February, its 2010 catalog is anything but typical. The Advertising Club of Toledo awarded IMCO's 2010 tool catalog a Bronze ADDY at the annual ceremony February...
Read More »Five-Flute End Mills cut titanium and stainless steel.
Able to cut hard-to-machine metals such as superalloys, titanium, and stainless steel, enDURO-® 5-flute end mills maximize metal removal rates and productivity, and optimize finish in high-power and lower-power machining centers. They are designed with advanced geometries and specialized coatings for maximum cutting efficiency and precision, and are available in various end designs, shank...
Read More »