Zierick Manufacturing Corp.

1306-W18 Terminals offer horizontal wire termination.
Electrical Equipment & Systems

1306-W18 Terminals offer horizontal wire termination.

Suitable for solid-state lighting, sensors, automotive module applications, 1306-W18 Terminals are designed for 18 gauge wires termination. Providing redundant wire connections, terminals are available in EIA Standard Tape 16 mm and Reel (1306-W18-T) configurations. Offering easy removal and replacement options, unit’s horizontal wire termination enhances use on ‘sensitive’ substrate...

Read More »
Insulation Piercing Terminal supports 24 gauge wires.
Electrical Equipment & Systems

Insulation Piercing Terminal supports 24 gauge wires.

Recognized to UL Standard 1977, Surface Mount Model 1307 allows for termination of 24 gauge wires. Insulation piercing technology permits wires to be attached to PCBs without need to remove insulation. Connector also allows for quick surface mount wire attachment to Integrated Metal Substrate applications without soldering discrete wire. Offered in 16 mm EIA Tape and Reel and bulk configurations,...

Read More »
UL Recognizes Additional Zierick 'Wire-to-Board' Connectors
Construction Equipment and Supplies

UL Recognizes Additional Zierick 'Wire-to-Board' Connectors

Zierick Manufacturing Corporation is pleased to announce that it has obtained Underwriters Laboratory (UL) Recognition on several additional connectors. These connectors can be used in a variety of ‘Wire-to-Board’ applications including Solid State Lighting, Industrial Control and Automotive Electronics. The connectors allow for both Surface Mount and Thru Hole placement and are designed to...

Read More »
SMT Insulation Piercing Crimp Terminal accommodates coaxial cable.
Electrical Equipment & Systems

SMT Insulation Piercing Crimp Terminal accommodates coaxial cable.

Surface Mount Insulation Piercing Crimp Terminal allowsÂ- termination of RG174/U or RG316/U coaxial cable. Connectors use series of blades oriented to pierce center conductor and outside jacket dielectric materials. While creating electrical connection to both signal wire and braid (ground) in one operation, process eliminates need for additional soldering operations. Housing...

Read More »
UL Certifies Zierick Surface Mount Insulation Piercing 'Wire-to-Board' Connectors
Construction Equipment and Supplies

UL Certifies Zierick Surface Mount Insulation Piercing 'Wire-to-Board' Connectors

Mount Kisco, NY - Zierick Manufacturing Corporation is pleased to announce that it has obtained Underwriters Laboratory (UL) Recognition on its' series of Surface Mount Insulation Piercing Terminals.Â-  These connectors can be used in a variety of 'Wire-to-Board' applications including Solid State Lighting, Industrial Control and Automotive Electronics.  The connectors allow Surface...

Read More »
UL Certifies Zierick 'Wire-to-Board' and 'Board-to-Board' Connectors
Construction Equipment and Supplies

UL Certifies Zierick 'Wire-to-Board' and 'Board-to-Board' Connectors

Catalog 43 is here! UL Certifies Zierick 'Wire-to-Board' and 'Board-to-Board' Connectors Mount Kisco, NY - Zierick Manufacturing Corporation is pleased to announce that it has obtained Underwriters Laboratory (UL) Recognition on several of its Connectors.Â-  These connectors can be used in a variety of 'Wire-to-Board' and 'Board-to-Board' applications including Solid State Lighting,...

Read More »
Construction Equipment and Supplies

Three New Highly Reliable, Economical Surface Mount Terminals Announced

Three new highly reliable and economical surface mount terminals have been announced by Zierick Manufacturing Corporation, Mount Kisco, NY. The new devices include a Surface Mount Post/.031 x .062" Tab (P/N 1276), which can be automatically placed on the board in any configuration with the customer's SMT placement system. The second new part is a Surface Mount Box Receptacle (P/N 1277) which...

Read More »
Board Stacking Connector Feeder speeds SMT part placement. .
Communication Systems & Equipment

Board Stacking Connector Feeder speeds SMT part placement. .

Surf-Shooter SMT loose-piece board stacking connector feeder mounts to feeder bay of flexible placement system and presents SMT components at feed rates greater than 3 pins/sec. Self-contained unit is less than 4 in. wide. Operating on 110 Vac 60 cycle, with 220 Vac 50 cycle optional, system places self-centering board stacking connectors which offer co-planarity within 0.001 in. and use...

Read More »
PCB for Advanced Medical Instrumentation at Global SMT Expo Draws Power thru Innovative Zierick Components
Construction Equipment and Supplies

PCB for Advanced Medical Instrumentation at Global SMT Expo Draws Power thru Innovative Zierick Components

Two innovative insulation piercing crimp connectors - designed and manufactured by Zierick Manufacturing Corporation, Mt. Kisco, NY were recently chosen to demonstrate the best ways of assuring fast, reliable, and economical surface mount connections and terminations to printed circuit boards at the SMT Hybrid Packaging Expo 2010 held in Nuremburg, Germany. The demonstration PCB -- produced live...

Read More »
Construction Equipment and Supplies

Surface Mount Pin Header eliminates co-planarity problems.

Consisting of square posts press-fit into round plated through holes on header PCB, Surface Mount Pin Header optimizes retention force. Circular solder pad on top of board and square solder pad on bottom are connected to conductive plate of through hole. Size of hole is such that it holds square pin in place, yet leaves 4 cavities that promote capillary action by drawing up melted solder where it...

Read More »
1306-W18 Terminals offer horizontal wire termination.
Electrical Equipment & Systems

1306-W18 Terminals offer horizontal wire termination.

Suitable for solid-state lighting, sensors, automotive module applications, 1306-W18 Terminals are designed for 18 gauge wires termination. Providing redundant wire connections, terminals are available in EIA Standard Tape 16 mm and Reel (1306-W18-T) configurations. Offering easy removal and replacement options, unit’s horizontal wire termination enhances use on ‘sensitive’ substrate...

Read More »
Company News

'Wire to Board' Interconnect Options Tool

Zierick Manufacturing Corporation has developed an interactive PDF tool to assist customers with the selection of ‘Wire to Board’ Interconnect Options the Company offers. The document is presented in graphical format based on Wire Size and Connection Type. Zierick understands that our customers have several choices available and this tool is meant to highlight this fact. In addition, the...

Read More »
Insulation Piercing Terminal supports 24 gauge wires.
Electrical Equipment & Systems

Insulation Piercing Terminal supports 24 gauge wires.

Recognized to UL Standard 1977, Surface Mount Model 1307 allows for termination of 24 gauge wires. Insulation piercing technology permits wires to be attached to PCBs without need to remove insulation. Connector also allows for quick surface mount wire attachment to Integrated Metal Substrate applications without soldering discrete wire. Offered in 16 mm EIA Tape and Reel and bulk configurations,...

Read More »
UL Recognizes Additional Zierick 'Wire-to-Board' Connectors
Construction Equipment and Supplies

UL Recognizes Additional Zierick 'Wire-to-Board' Connectors

Zierick Manufacturing Corporation is pleased to announce that it has obtained Underwriters Laboratory (UL) Recognition on several additional connectors. These connectors can be used in a variety of ‘Wire-to-Board’ applications including Solid State Lighting, Industrial Control and Automotive Electronics. The connectors allow for both Surface Mount and Thru Hole placement and are designed to...

Read More »
SMT Insulation Piercing Crimp Terminal accommodates coaxial cable.
Electrical Equipment & Systems

SMT Insulation Piercing Crimp Terminal accommodates coaxial cable.

Surface Mount Insulation Piercing Crimp Terminal allowsÂ- termination of RG174/U or RG316/U coaxial cable. Connectors use series of blades oriented to pierce center conductor and outside jacket dielectric materials. While creating electrical connection to both signal wire and braid (ground) in one operation, process eliminates need for additional soldering operations. Housing...

Read More »
UL Certifies Zierick Surface Mount Insulation Piercing 'Wire-to-Board' Connectors
Construction Equipment and Supplies

UL Certifies Zierick Surface Mount Insulation Piercing 'Wire-to-Board' Connectors

Mount Kisco, NY - Zierick Manufacturing Corporation is pleased to announce that it has obtained Underwriters Laboratory (UL) Recognition on its' series of Surface Mount Insulation Piercing Terminals.Â-  These connectors can be used in a variety of 'Wire-to-Board' applications including Solid State Lighting, Industrial Control and Automotive Electronics.  The connectors allow Surface...

Read More »
UL Certifies Zierick 'Wire-to-Board' and 'Board-to-Board' Connectors
Construction Equipment and Supplies

UL Certifies Zierick 'Wire-to-Board' and 'Board-to-Board' Connectors

Catalog 43 is here! UL Certifies Zierick 'Wire-to-Board' and 'Board-to-Board' Connectors Mount Kisco, NY - Zierick Manufacturing Corporation is pleased to announce that it has obtained Underwriters Laboratory (UL) Recognition on several of its Connectors.Â-  These connectors can be used in a variety of 'Wire-to-Board' and 'Board-to-Board' applications including Solid State Lighting,...

Read More »
Construction Equipment and Supplies

Three New Highly Reliable, Economical Surface Mount Terminals Announced

Three new highly reliable and economical surface mount terminals have been announced by Zierick Manufacturing Corporation, Mount Kisco, NY. The new devices include a Surface Mount Post/.031 x .062" Tab (P/N 1276), which can be automatically placed on the board in any configuration with the customer's SMT placement system. The second new part is a Surface Mount Box Receptacle (P/N 1277) which...

Read More »
Board Stacking Connector Feeder speeds SMT part placement. .
Communication Systems & Equipment

Board Stacking Connector Feeder speeds SMT part placement. .

Surf-Shooter SMT loose-piece board stacking connector feeder mounts to feeder bay of flexible placement system and presents SMT components at feed rates greater than 3 pins/sec. Self-contained unit is less than 4 in. wide. Operating on 110 Vac 60 cycle, with 220 Vac 50 cycle optional, system places self-centering board stacking connectors which offer co-planarity within 0.001 in. and use...

Read More »
PCB for Advanced Medical Instrumentation at Global SMT Expo Draws Power thru Innovative Zierick Components
Construction Equipment and Supplies

PCB for Advanced Medical Instrumentation at Global SMT Expo Draws Power thru Innovative Zierick Components

Two innovative insulation piercing crimp connectors - designed and manufactured by Zierick Manufacturing Corporation, Mt. Kisco, NY were recently chosen to demonstrate the best ways of assuring fast, reliable, and economical surface mount connections and terminations to printed circuit boards at the SMT Hybrid Packaging Expo 2010 held in Nuremburg, Germany. The demonstration PCB -- produced live...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers