Aremco Products, Inc.
Unit "B"
Valley Cottage, NY 10989
Putty seals high temperature molds in foundries.
Single-part, high-temperature Pyro-Putty(TM) 1500 is used as sealant and gasketing compound in primary metal, foundry, and smelting industries for service conditions to 2,300Ã-
Read More »Programmable Dicing Saw suits precision applications.
Fully automatic Accu-Cut(TM) Model 5255 is suited for diamond dicing of ceramic, ferrite, quartz, and semiconductor substrates up to 6 x 6 x 1 in. Able to handle metal- and resin-bonded diamond wheels up to 4.5 in. dia, unit features menu-driven software for entering cut profile and variable-speed spindle with 0-10,000 rpm control. Indexing is handled in steps of .0001 in., and optic system with...
Read More »Adhesive/Coating System insulates induction heating coils.
Pyro-Putty(TM) 677 single-part, water-dispersed, alumina-silica based adhesive and coating system is suited for electrical insulation and bonding applications to 2,400-°F. Thixotropic product is supplied in paste consistency with viscosity of 43,000 cps and specific gravity of 2.17 g/cc. After application, it dries at room temperature in 1-4 hr and cures in 2 hr at 200-°F. Material produces...
Read More »Ceramic-Based Coating seals thermal spray coatings.
Ceramacoat(TM) 503-VFG-C high-temperature sealant fills micro-porosity in corrosion protective, thermal spray coatings. It is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically-resistant, inorganic material will not outgas or decompose in high-temperature, corrosive applications up to 3,200Ã-
Read More »Adhesive bonds ceramics to metals at 2500-
Ceramabond(TM) 668 adhesive is single part, alumina-filled compound. Physical properties include torque strength of 10.6 ft-lb, dielectric strength of 245 V per mil at room temperature, and coefficient of thermal expansion of 4.0 ppm/Ã-
Read More »Magnesium Oxide Ceramics withstand extreme temperatures.
Super-Heat(TM) 676-Series Magnesium Oxide (MgO) Ceramic Crucibles feature high density, fine grain microstructure with open porosity of less than 1% and average density of 3.45 g/cc. Full-fired, 99% pure material can be used in processing of metals, slags, and superconductor compounds at temperatures to 4,000Ã-
Read More »Mounting Adhesive offers thermal and mechanical stability.
Crystalbond(TM) 590 thermoplastic temporary mounting adhesive bonds ceramics, optical components, and semiconductors for dicing and polishing operations. Application is accomplished by preheating mounting plate to 300Ã-
Read More »White Protective Coating works in applications to 1100-
Used as reflective coating on high-temperature UV lamps, silicone-based, water-dispersible Corr-Paint(TM) CP4040 adheres to glass, quartz, ceramic, and sandblasted as well as marginally prepared metal surfaces. It dries at room temperature and cures as coated component is ramped up to operating temperature. Applied via pneumatic spray equipment, brush, or roller, coating is color-stable and...
Read More »Epoxy System suits applications to 400-
Clear, unfilled, Aremco-Bond(TM) 820 provides general purpose bonding of ceramics, glass, plastics, and metals. Flexural and tensile shear strengths are 8,000 and 1,200 psi, respectively. Product mixes in 1:1 ratio, providing viscosity of 12,000 cps and cure time of 45 min at room temperature. Shore-D hardness is 70 and shrinkage is less than .008 in./in. upon curing. Aremco-Bond(TM) 820...
Read More »High Temperature Ceramic Adhesive seals tundish nozzles.
Single-part, alumina silica-filled Ceramabond(TM) 813A bonds to ceramic, refractory, and metal substrates. Rated for operating temperatures to 3,000Ã-
Read More »