Computer Conversions Corporation
East Northport, NY 11731
Synchro Converter Modules offer -
Infinite resolution Synchro/Linear DC converter modules measure 2.6 x 3.1 x .82 in. and mount on printed circuit boards. They convert synchro or resolver inputs of 11.8 or 90 V, 400Hz or 90V, 60Hz into Ã-
Read More »Digital to Synchro Converters require only +5 Vdc input power.
DSPH Series 12- to 16-bit 25 VA Reference Powered Converters have internal transformer isolated output even at 60 Hz. Units will accept up to 16 bit natural binary input and convert it to 90 V 3-wire Synchro signal from 60 to 400 Hz with accuracy up to Ã-
Read More »Synchro Converters utilize military standard ICs.
Synchro Converters use MIL M38510 Class B or MIL STD 883B integrated circuits, JAN TX semiconductors, and established reliability resistors and capacitors. Standard resolution of 16 Bit binary or 5 digit BCD and accuracy up to Ã-
Read More »Synchro to DC Converter operates at 400 conversions/sec.
Miniature (1.5 cu. in) solid-state Series SD109 converts 3-phase synchro or 2-phase resolver inputs into sine and cosine outputs. Peak angular error is rated at Ã-
Read More »Absolute Encoders use resolver shaft transducers.
Multiplexed, scaleable, absolute encoders convert up to 16 shaft inputs to BCD or binary information, corresponding directly to shaft angle with accuracy of Ã-
Read More »Converters require no external transformers.
PC104 Series consists of 3- and 4-channel PC/104 and compatible Synchro, Resolver, and LVDT/RVDT to digital converters employing type 2 ratiometric tracking converters. They accept any group of up to 4 individual, 3-wire Synchro, or 4-wire Resolver inputs, or 2-4 wire LVDT/RVDT inputs; over frequency range of 50 Hz to 10 kHz, and convert them into 10-16 bit words of natural binary data...
Read More »Digital to LVDT Converter has accuracy of -
Two-Channel 14-bit series accepts 14-bit offset binary or two's complement digital input, and converts it into two 0-7 V RMS outputs at 3 KHz. Output load is 2000 Ohms minimum. Other output voltages and frequencies are available. Part no. DLVDT314A-7-1 requires two's complement digital input, 7 V RMS reference input, and +5 V @ 1 ma, +15 V @ 25 ma, -15 V @ 25 ma maximum. Operating temperature...
Read More »Converters offer 16-bit resolution and +/-.005 deg accuracy.
Synchro to Digital Converters are designed to convert 2-speed Synchro or Resolver inputs of 11.8 V, 26 V, 90 V 400 Hz, or 90 V 60 Hz into 16-bit parallel binary outputs respresenting angle. Speed ratios of 1 x 10, 1 x 18, 1 x 36, 1 x 8, 1 x 16, 1 x 64, and 1 x 128 are available. Converters track rates up to 1000 deg/sec. They have DC velocity output and built in test (BITE) with digital...
Read More »Synchro To BCD Converters mount on PC boards.
SBC40 series converts synchro or resolver inputs of 11.8 or 90 V at 400 Hz into 3 or 4 decade BCD data representing angle with accuracy of Ã-
Read More »Absolute Encoders suit severe environments.
Modular encoders convert shaft input to BCD or binary information corresponding directly to shaft angle with accuracy of +/-1 part in 1000. They consist of 1.1 in. dia transducer and 2.6 x 3.1 x 0.6 in. printed circuit mounting module. Available outputs are 0 to 360 deg, 0 to 999 bcd, or 10-bit binary. Data outputs are TTL compatible. Data transfer and data hold lines are provided for interfacing...
Read More »