Tornos Technologies

Laboratory and Research Supplies and Equipment

Tornos Makes a Splash at IMTS 2010 - Line up to Include New Tornos Machines and Expanded Almac Milling and Esco Coil-Fed Turning Lines

Visit Tornos at IMTS, Booth #S-8666 to see the new EvoDECO, Almac CU 1007 with Robot, and more! Chicago, IL - A new Tornos single spindle turning center and an expanded Almac and Esco by Tornos product lineup will be revealed at the International Manufacturing Technology Show (IMTS) in booth #S-8666 at McCormick Place in Chicago on September 13-18, 2010. The EvoDECO is the latest innovation to...

Read More »
Laboratory and Research Supplies and Equipment

Tornos Makes a Splash at IMTS 2010 - Line up to Include New Tornos Machines and Expanded Almac Milling and Esco Coil-Fed Turning Lines

Visit Tornos at IMTS, Booth #S-8666 to see the new EvoDECO, Almac CU 1007 with Robot, and more! Chicago, IL - A new Tornos single spindle turning center and an expanded Almac and Esco by Tornos product lineup will be revealed at the International Manufacturing Technology Show (IMTS) in booth #S-8666 at McCormick Place in Chicago on September 13-18, 2010. The EvoDECO is the latest innovation to...

Read More »
Machinery & Machining Tools

Single-Spindle Turning Center combines rigidity and speed.

Able to work with/without guide bush, EvoDECO series includes 16a and 16e models that accept 2-16 mm dia bar stock. Fully synchronous drives optimize accel/decel, reducing cycle times for parts that require increased stopping. Ten axes + 2 C axes on 16a (8 + 2 on 16e) are managed simultaneously with perfect interpolarity between axes, and 4 independent tool systems on 16a (3 on 16e) allow...

Read More »
Machinery & Machining Tools

Single-Spindle Turning Center combines rigidity and speed.

Able to work with/without guide bush, EvoDECO series includes 16a and 16e models that accept 2-16 mm dia bar stock. Fully synchronous drives optimize accel/decel, reducing cycle times for parts that require increased stopping. Ten axes + 2 C axes on 16a (8 + 2 on 16e) are managed simultaneously with perfect interpolarity between axes, and 4 independent tool systems on 16a (3 on 16e) allow...

Read More »
Turning Center targets general engineering industry.
Machinery & Machining Tools

Turning Center targets general engineering industry.

With pre-loaded attachments and accessories, Sigma 20 Pursuit sliding headstock turning center can turn parts ranging from simple to moderately complex. It has 3 double live spindles for total of 6 axes for cross milling front/back, and accommodates 8-16 front and 8 backworking tools. Unit offers 1-piece core motor direct drive spindles, 5/8 in. tool shanks, 7 hp drive, synchronous rotary guide...

Read More »
Turning Center targets general engineering industry.
Machinery & Machining Tools

Turning Center targets general engineering industry.

With pre-loaded attachments and accessories, Sigma 20 Pursuit sliding headstock turning center can turn parts ranging from simple to moderately complex. It has 3 double live spindles for total of 6 axes for cross milling front/back, and accommodates 8-16 front and 8 backworking tools. Unit offers 1-piece core motor direct drive spindles, 5/8 in. tool shanks, 7 hp drive, synchronous rotary guide...

Read More »
Machinery & Machining Tools

Swiss Turning Center produces moderately complex parts.

Swiss-style, 6-axis DECO 20s is mirror image machine with near equal number of tools for both 5.5 hp, 10,000 rpm direct-drive main and counter spindles. Featuring total of 22 tool positions, machine supports quick-mount powered or live tooling that can perform milling and drilling operations in addition to turning. Unit supports 220 mm max part length and 20 mm part diameters and features Fanuc...

Read More »
Machinery & Machining Tools

Swiss Turning Center produces moderately complex parts.

Swiss-style, 6-axis DECO 20s is mirror image machine with near equal number of tools for both 5.5 hp, 10,000 rpm direct-drive main and counter spindles. Featuring total of 22 tool positions, machine supports quick-mount powered or live tooling that can perform milling and drilling operations in addition to turning. Unit supports 220 mm max part length and 20 mm part diameters and features Fanuc...

Read More »
Laboratory and Research Supplies and Equipment

Tornos Makes a Splash at IMTS 2010 - Line up to Include New Tornos Machines and Expanded Almac Milling and Esco Coil-Fed Turning Lines

Visit Tornos at IMTS, Booth #S-8666 to see the new EvoDECO, Almac CU 1007 with Robot, and more! Chicago, IL - A new Tornos single spindle turning center and an expanded Almac and Esco by Tornos product lineup will be revealed at the International Manufacturing Technology Show (IMTS) in booth #S-8666 at McCormick Place in Chicago on September 13-18, 2010. The EvoDECO is the latest innovation to...

Read More »
Laboratory and Research Supplies and Equipment

Tornos Makes a Splash at IMTS 2010 - Line up to Include New Tornos Machines and Expanded Almac Milling and Esco Coil-Fed Turning Lines

Visit Tornos at IMTS, Booth #S-8666 to see the new EvoDECO, Almac CU 1007 with Robot, and more! Chicago, IL - A new Tornos single spindle turning center and an expanded Almac and Esco by Tornos product lineup will be revealed at the International Manufacturing Technology Show (IMTS) in booth #S-8666 at McCormick Place in Chicago on September 13-18, 2010. The EvoDECO is the latest innovation to...

Read More »
Machinery & Machining Tools

Single-Spindle Turning Center combines rigidity and speed.

Able to work with/without guide bush, EvoDECO series includes 16a and 16e models that accept 2-16 mm dia bar stock. Fully synchronous drives optimize accel/decel, reducing cycle times for parts that require increased stopping. Ten axes + 2 C axes on 16a (8 + 2 on 16e) are managed simultaneously with perfect interpolarity between axes, and 4 independent tool systems on 16a (3 on 16e) allow...

Read More »
Machinery & Machining Tools

Single-Spindle Turning Center combines rigidity and speed.

Able to work with/without guide bush, EvoDECO series includes 16a and 16e models that accept 2-16 mm dia bar stock. Fully synchronous drives optimize accel/decel, reducing cycle times for parts that require increased stopping. Ten axes + 2 C axes on 16a (8 + 2 on 16e) are managed simultaneously with perfect interpolarity between axes, and 4 independent tool systems on 16a (3 on 16e) allow...

Read More »
Turning Center targets general engineering industry.
Machinery & Machining Tools

Turning Center targets general engineering industry.

With pre-loaded attachments and accessories, Sigma 20 Pursuit sliding headstock turning center can turn parts ranging from simple to moderately complex. It has 3 double live spindles for total of 6 axes for cross milling front/back, and accommodates 8-16 front and 8 backworking tools. Unit offers 1-piece core motor direct drive spindles, 5/8 in. tool shanks, 7 hp drive, synchronous rotary guide...

Read More »
Turning Center targets general engineering industry.
Machinery & Machining Tools

Turning Center targets general engineering industry.

With pre-loaded attachments and accessories, Sigma 20 Pursuit sliding headstock turning center can turn parts ranging from simple to moderately complex. It has 3 double live spindles for total of 6 axes for cross milling front/back, and accommodates 8-16 front and 8 backworking tools. Unit offers 1-piece core motor direct drive spindles, 5/8 in. tool shanks, 7 hp drive, synchronous rotary guide...

Read More »
People in the News

Andy Stemler Joins Tornos as Midwest Regional Sales Manager

Lombard, IL, March 13, 2008 - Andy Stemler comes to Tornos with over 15 years of experience in the machine tool industry. Stemler holds a marketing degree from Lewis University and was most recently the manager of Hitech Machinery's Used Machinery Division. He also had successful stints at Ellison Machine Tools and Robotics, Advanced Machinery Sales, and Intech EDM. Stemler met Tornos US...

Read More »
People in the News

Andy Stemler Joins Tornos as Midwest Regional Sales Manager

Lombard, IL, March 13, 2008 - Andy Stemler comes to Tornos with over 15 years of experience in the machine tool industry. Stemler holds a marketing degree from Lewis University and was most recently the manager of Hitech Machinery's Used Machinery Division. He also had successful stints at Ellison Machine Tools and Robotics, Advanced Machinery Sales, and Intech EDM. Stemler met Tornos US...

Read More »

All Topics