Magnetic Analysis Corp.
Elmsford, NY 10523
Eddy Current Tester delivers multimodal operation.
MultiMac(TM) operates with encircling/sector test coils for detecting short-surface defects and/or rotary test probes for identifying long, seam-type surface defects. Test Screen displays single channel, and Multi-Screen provides simultaneous display of 1-8 channels. Each channel can be individually configured with different frequencies and channel modes. Along with end-suppression circuitry,...
Read More »Ultrasonic Tester features 32 test channels.
Designed for flaw detection as well as measurement of wall thickness and OD of tubes and pipes, EchomacÃ-® FD-4 also reports ID dimensions, ovality, eccentricity, and wall variations. It is suitable for on-line or off-line inspections of tubes, bars, or plates, and utilizes EchoHunter software to configure each channel for any combination of thickness and flaw detection. System also features...
Read More »
Eddy Current Comparator runs automatically after setup.
Varimac V tests metal parts, bar, wire, and tubing for variations in physical characteristics such as alloy, hardness, case depth, and heat treatment. Selective circuits optimize differentiation between signals for wanted and unwanted conditions. Frequency range of 100 Hz to 2 MHz enhances selectivity, while 20 GB hard drive handles all data storage for setups and reporting. Testing can be...
Read More »
Magnetism Detector displays degree and polarity of residual magnetism in iron and steel objects.
Pocket-sized, hand-held Magnetism Detector displays degree and polarity of residual magnetism in iron and steel objects. It operates by placing base of indicating needle against object being tested. Full-scale deflection is equal to approximately 20 gauss. Typical applications include checking products such as bar, tubing, or metal parts where magnetism can interfere with subsequent machining and...
Read More »
Eddy-Current Tester finds defects by non-destructive analysis.
ROTOMACÃ-® 9 rotary test system detects long, seam-type defects in wire, tubing, and bar stock. Real-time, flat-panel color display shows waveforms, reflecting true phase and amplitude. Oscillating frequency range of 50 KHz to 1 MHz, combined with high-frequency capacity rotary mechanism and test probes, allows detection of defects as shallow as .001 in. deep. Digital electronics and...
Read More »Magnetic Analysis Corp. Appoints Dudley Boden President/CEO
Elmsford, NY - Magnetic Analysis Corp. (MAC), a worldwide leader in the nondestructive testing industry, has recently promoted Dudley M. Boden to President and Chief Executive Officer. Having spent 15 years as MAC’s Vice President - Sales Marketing, Boden brings an in depth understanding of the company’s test systems and customer inspection needs. He is now focused on broadening the firm’s...
Read More »Magnetic Analysis Corp. 85th Anniversary
ELMSFORD, NYÃ- -Ã- Magnetic Analysis Corporation, a leader in nondestructive testing, is celebrating 85 years of designing and supplying innovative inspection instruments and systems for metal manufacturers throughout the world. Founded in 1928 in Long Island City, NY at a time when testing for quality purposes usually meant laboratory “sampling” techniques which essentially...
Read More »Eddy Current Tester delivers multimodal operation.
MultiMac(TM) operates with encircling/sector test coils for detecting short-surface defects and/or rotary test probes for identifying long, seam-type surface defects. Test Screen displays single channel, and Multi-Screen provides simultaneous display of 1-8 channels. Each channel can be individually configured with different frequencies and channel modes. Along with end-suppression circuitry,...
Read More »Ultrasonic Tester features 32 test channels.
Designed for flaw detection as well as measurement of wall thickness and OD of tubes and pipes, EchomacÃ-® FD-4 also reports ID dimensions, ovality, eccentricity, and wall variations. It is suitable for on-line or off-line inspections of tubes, bars, or plates, and utilizes EchoHunter software to configure each channel for any combination of thickness and flaw detection. System also features...
Read More »
Eddy Current Comparator runs automatically after setup.
Varimac V tests metal parts, bar, wire, and tubing for variations in physical characteristics such as alloy, hardness, case depth, and heat treatment. Selective circuits optimize differentiation between signals for wanted and unwanted conditions. Frequency range of 100 Hz to 2 MHz enhances selectivity, while 20 GB hard drive handles all data storage for setups and reporting. Testing can be...
Read More »
Magnetism Detector displays degree and polarity of residual magnetism in iron and steel objects.
Pocket-sized, hand-held Magnetism Detector displays degree and polarity of residual magnetism in iron and steel objects. It operates by placing base of indicating needle against object being tested. Full-scale deflection is equal to approximately 20 gauss. Typical applications include checking products such as bar, tubing, or metal parts where magnetism can interfere with subsequent machining and...
Read More »
Eddy-Current Tester finds defects by non-destructive analysis.
ROTOMACÃ-® 9 rotary test system detects long, seam-type defects in wire, tubing, and bar stock. Real-time, flat-panel color display shows waveforms, reflecting true phase and amplitude. Oscillating frequency range of 50 KHz to 1 MHz, combined with high-frequency capacity rotary mechanism and test probes, allows detection of defects as shallow as .001 in. deep. Digital electronics and...
Read More »