Metallized Carbon Corp.

Metallized Carbon Corporation Offers Modern Carbon-Graphite Self-Lubricating Materials Ideal for Aircraft Shaft Mechanical Seals
Adhesives & Sealants

Metallized Carbon Corporation Offers Modern Carbon-Graphite Self-Lubricating Materials Ideal for Aircraft Shaft Mechanical Seals

Unique materials offer high thermal conductivity, low friction and oxidation resistance Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, offers a variety of materials ideal for mechanical seals in aircraft shaft applications, including main shaft seals for both aircraft turbine...

Read More »
Carbon-Graphite Piston Rings seal high-pressure gases.
Electrical Equipment & Systems

Carbon-Graphite Piston Rings seal high-pressure gases.

Carbon-graphite piston rings, used in conjunction with carbon-graphite guide rings or carrier rings that hold piston centered on cylinder bore, are self-lubricating and seal high-pressure gas in applications requiring compressed gases that do not contain oil or grease. Guide rings can be either solid rings or segmented rings with butt joints. At least two rings with off-set segment joints are...

Read More »
Rotary Pumps offer custom vanes, rotors, and end plates.
Fluid & Gas Flow Equipment

Rotary Pumps offer custom vanes, rotors, and end plates.

Available for rotary vane pumps, Carbon-Graphite Vanes, Rotors, and End Plates are suitable for pumping liquids with poor lubricating qualities, strong chemicals that attack metals, and air, vacuum, combustion, and gasoline vapors. Materials are chemical resistant and compatible with FDA food and beverage regulations. Dry running applications include automotive anti-smog pumps, breathable air...

Read More »

Carbon Graphite suits food contact applications.

Approved by FDA, Metcar Grade M-58 can be used in dry running, food mixer seals to provide low seal friction and long seal wear life. Electro graphite base material contains special additive to minimize friction and optimize dry running wear rate. Available fully machined to customer’s specifications, Metcar Grade M-58 primary seal rings are suitable for use in temperatures from -30 to...

Read More »
Materials

Metcar Grade M-133 Approved by National Sanitation Foundation

Carbon-graphite material approved for use in the construction of commercial food equipment Metcar Grade M-133, a self-lubricating carbon-graphite material, produced exclusively by Metallized Carbon Corporation, was recently approved by the National Sanitation Foundation (NSF) to their Standard NSF 51-2012, for materials used in the construction of commercial food equipment. Manufactures,...

Read More »
Metallized Carbon Corporation Announces Availability of Custom Vanes, Rotors, and End Plates for Rotary Pumps
Electrical Equipment & Systems

Metallized Carbon Corporation Announces Availability of Custom Vanes, Rotors, and End Plates for Rotary Pumps

Ideal for pumps pumping both liquids and gases Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, announces the availability of custom vanes, rotors, and end plates for use in rotary vane pumps pumping both liquids and gases. The carbon-graphite components provide superior...

Read More »
Mechanical Seal Primary Rings seal low viscosity liquids.
Electrical Equipment & Systems

Mechanical Seal Primary Rings seal low viscosity liquids.

Mechanical seals with Metcar Grade M-444 antimony impregnated, carbon-graphite primary seal rings can successfully seal low viscosity liquids such as Freon refrigerants, liquid oxygen, liquid carbon dioxide, propane, ethylene, and acetone. Self-polishing characteristic of M-444 material and high dimensional stability of both solid silicon carbide and antimony impregnated carbon-graphite enables...

Read More »
Electrical Equipment & Systems

Custom Bearings run submerged in low-viscosity liquids.

Able to run in applications from -400 to +1,000°F, custom carbon-graphite bearings handle liquids such asÂ- water, gasoline, hot oil, solvents, strong chemicals, molten metals, liquefied gases, and beverages. Bearings are available in 150+ grades of self-polishing and dimensionally stable carbon-graphite and can be provided to customer print or customer approved dimensions and...

Read More »
Carbon-Graphite Bearings operate at high temperatures.
Electrical Equipment & Systems

Carbon-Graphite Bearings operate at high temperatures.

FDA approved for use with food/pharmaceuticals, Metcar Bearings are designed for dry runningÂ- at temperatures from 350–1,000°F in oxidizing atmospheres and 350–6,000°F in non-oxidizing atmospheres. Because bearings rely on graphite for self-lubricating properties, they are dimensionally stable and are not subject to melting, softening, or deformation. Typical...

Read More »
Resin-Impregnated Carbon-Graphite is self lubricating.

Resin-Impregnated Carbon-Graphite is self lubricating.

Metcar® Grade M-400 is non-porous, heat resistant to 500°F, and suited for machine parts that must run submerged in water, water-based chemicals, or organic chemicals with low friction and extended wear life. Available in parts machined to meet size specifications or in 56 standard blank sizes, material is approved for use in potable water and food contact applications. Applications include...

Read More »
Metallized Carbon Corporation Offers Modern Carbon-Graphite Self-Lubricating Materials Ideal for Aircraft Shaft Mechanical Seals
Adhesives & Sealants

Metallized Carbon Corporation Offers Modern Carbon-Graphite Self-Lubricating Materials Ideal for Aircraft Shaft Mechanical Seals

Unique materials offer high thermal conductivity, low friction and oxidation resistance Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, offers a variety of materials ideal for mechanical seals in aircraft shaft applications, including main shaft seals for both aircraft turbine...

Read More »
People in the News

Metallized Carbon Corporation Appoints Justin Snowdon as Sales Manager

High energy sales professional to drive results and expand markets. Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, announces that Justin Snowdon has been appointed Sales Manager, responsible for driving sales initiatives and expanding markets for Metcar products and services....

Read More »
Carbon-Graphite Piston Rings seal high-pressure gases.
Electrical Equipment & Systems

Carbon-Graphite Piston Rings seal high-pressure gases.

Carbon-graphite piston rings, used in conjunction with carbon-graphite guide rings or carrier rings that hold piston centered on cylinder bore, are self-lubricating and seal high-pressure gas in applications requiring compressed gases that do not contain oil or grease. Guide rings can be either solid rings or segmented rings with butt joints. At least two rings with off-set segment joints are...

Read More »
Rotary Pumps offer custom vanes, rotors, and end plates.
Fluid & Gas Flow Equipment

Rotary Pumps offer custom vanes, rotors, and end plates.

Available for rotary vane pumps, Carbon-Graphite Vanes, Rotors, and End Plates are suitable for pumping liquids with poor lubricating qualities, strong chemicals that attack metals, and air, vacuum, combustion, and gasoline vapors. Materials are chemical resistant and compatible with FDA food and beverage regulations. Dry running applications include automotive anti-smog pumps, breathable air...

Read More »

Carbon Graphite suits food contact applications.

Approved by FDA, Metcar Grade M-58 can be used in dry running, food mixer seals to provide low seal friction and long seal wear life. Electro graphite base material contains special additive to minimize friction and optimize dry running wear rate. Available fully machined to customer’s specifications, Metcar Grade M-58 primary seal rings are suitable for use in temperatures from -30 to...

Read More »
Materials

Metcar Grade M-133 Approved by National Sanitation Foundation

Carbon-graphite material approved for use in the construction of commercial food equipment Metcar Grade M-133, a self-lubricating carbon-graphite material, produced exclusively by Metallized Carbon Corporation, was recently approved by the National Sanitation Foundation (NSF) to their Standard NSF 51-2012, for materials used in the construction of commercial food equipment. Manufactures,...

Read More »
People in the News

Metallized Carbon Corporation Appoints Roxanne Andrian as Quality Assurance Manager

To continue the tradition of excellence expected from Metallized Carbon Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, announces that Roxanne Andrian will fill the position of Quality Assurance Manager. Andrian will oversee the operations of the Quality Assurance department and...

Read More »
Metallized Carbon Corporation Announces Availability of Custom Vanes, Rotors, and End Plates for Rotary Pumps
Electrical Equipment & Systems

Metallized Carbon Corporation Announces Availability of Custom Vanes, Rotors, and End Plates for Rotary Pumps

Ideal for pumps pumping both liquids and gases Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, announces the availability of custom vanes, rotors, and end plates for use in rotary vane pumps pumping both liquids and gases. The carbon-graphite components provide superior...

Read More »
People in the News

Metallized Carbon Corporation Appoints Roxanne Andrian as Quality Assurance Manager

To continue the tradition of excellence expected from Metallized Carbon Metallized Carbon Corporation, a global leader in the manufacture of oil-free, self-lubricating, carbon-graphite materials for severe service lubrication applications, announces that Roxanne Andrian will fill the position of Quality Assurance Manager. Andrian will oversee the operations of the Quality Assurance department and...

Read More »
Mechanical Seal Primary Rings seal low viscosity liquids.
Electrical Equipment & Systems

Mechanical Seal Primary Rings seal low viscosity liquids.

Mechanical seals with Metcar Grade M-444 antimony impregnated, carbon-graphite primary seal rings can successfully seal low viscosity liquids such as Freon refrigerants, liquid oxygen, liquid carbon dioxide, propane, ethylene, and acetone. Self-polishing characteristic of M-444 material and high dimensional stability of both solid silicon carbide and antimony impregnated carbon-graphite enables...

Read More »

All Topics