Electromatic Equipment Co., Inc.
Cedarhurst, NY 11516
Share:
Handheld Multimodal Stroboscopes offer optimal light output.
Respectively, QB-LED and QBS-LED employ 40 and 118 LEDs to deliverÃ- 5,000 and 10,000 lux peak. Adjustable flash range of 30–300,000 fpm (0.5–5,000 Hz) is displayed in user-selectable units on backlit LCD, andÃ- flash duration is also adjustable. Menu structure facilitates access toÃ- common and special functions, and built-in Li-ion battery provides up to 7 hr continuous...
Read More »
Linear Strobe delivers bright, sharp, uniform light.
Suited for use on web equipment up to 16 in. wide, compact Checkline LS-5-12000 measures 6.0 x 5.1 x 4.4 in. Strobe, with Xenon U-tube, offers flash duration less than 5 Ã-µsec and life of 200 million flashes. Flash rate can be externally triggered by sensor/controller on process machine using standard TTL-type square wave signal rates up 208 Hz. CE certified unit runs on 24 Vdc, using either...
Read More »
Ultrasonic Wall Thickness Gauge is customizable.
With measuring range of 0.025-19.999 in. and resolution of .001 in., TI-25S ultrasonic wall thickness gauge comes pre-programmed with sonic velocities for aluminum 2024, stainless steel 303, steel 4340, cast iron, Plexiglass, PVC, polystyrene and polyurethane. It is switch selectable between English or metric units and displays results in inches, inches/microsecond, millimeters and meters/second....
Read More »
Coating Thickness Gauges suit laboratory and field use.
Series 3000 provides non-destructive coating measurements on steel and non-ferrous metals. Probe construction minimizes contact pressure, preventing scratch and indentation damage to polished and sensitive surfaces. Units provide infrared or serial data transfer and statistics. Each has measuring range of 0.1-60.0 mils, provides measurements in user-selected mils or microns, and offers driftless...
Read More »
Wire Terminal Pull Tester is accurate to 0.5%.
Model WTT-110 measures pull or pull-off force on soldered/solder-less wire terminals in accordance with MIL, UL, SAE, DIN, IEC BS, and EN standards. Strain gauge sensing provides resolution of 1/5000 with 0.5% accuracy and is suitable for wires from 30-8 AWG with 0.010-0.130 in. dia. Features include Peak-Hold and Continuous Measurement modes and digital display that shows current force and...
Read More »
Digital Stroboscope suits non-contact measurement.
Portable Model PK2 has internal NiMH battery that provides one full hour of continuous operating time, regardless of flash rate. It offers flash brightness of 800 Lux and flash rate up to 12,500 flashes/min. CE-certified, unit provides accurate speed control with drift-free operation, resolution of Ã-
Read More »Handheld Multimodal Stroboscopes offer optimal light output.
Respectively, QB-LED and QBS-LED employ 40 and 118 LEDs to deliverÃ- 5,000 and 10,000 lux peak. Adjustable flash range of 30–300,000 fpm (0.5–5,000 Hz) is displayed in user-selectable units on backlit LCD, andÃ- flash duration is also adjustable. Menu structure facilitates access toÃ- common and special functions, and built-in Li-ion battery provides up to 7 hr continuous...
Read More »
Linear Strobe delivers bright, sharp, uniform light.
Suited for use on web equipment up to 16 in. wide, compact Checkline LS-5-12000 measures 6.0 x 5.1 x 4.4 in. Strobe, with Xenon U-tube, offers flash duration less than 5 Ã-µsec and life of 200 million flashes. Flash rate can be externally triggered by sensor/controller on process machine using standard TTL-type square wave signal rates up 208 Hz. CE certified unit runs on 24 Vdc, using either...
Read More »
Ultrasonic Wall Thickness Gauge is customizable.
With measuring range of 0.025-19.999 in. and resolution of .001 in., TI-25S ultrasonic wall thickness gauge comes pre-programmed with sonic velocities for aluminum 2024, stainless steel 303, steel 4340, cast iron, Plexiglass, PVC, polystyrene and polyurethane. It is switch selectable between English or metric units and displays results in inches, inches/microsecond, millimeters and meters/second....
Read More »
Coating Thickness Gauges suit laboratory and field use.
Series 3000 provides non-destructive coating measurements on steel and non-ferrous metals. Probe construction minimizes contact pressure, preventing scratch and indentation damage to polished and sensitive surfaces. Units provide infrared or serial data transfer and statistics. Each has measuring range of 0.1-60.0 mils, provides measurements in user-selected mils or microns, and offers driftless...
Read More »
Wire Terminal Pull Tester is accurate to 0.5%.
Model WTT-110 measures pull or pull-off force on soldered/solder-less wire terminals in accordance with MIL, UL, SAE, DIN, IEC BS, and EN standards. Strain gauge sensing provides resolution of 1/5000 with 0.5% accuracy and is suitable for wires from 30-8 AWG with 0.010-0.130 in. dia. Features include Peak-Hold and Continuous Measurement modes and digital display that shows current force and...
Read More »
Digital Stroboscope suits non-contact measurement.
Portable Model PK2 has internal NiMH battery that provides one full hour of continuous operating time, regardless of flash rate. It offers flash brightness of 800 Lux and flash rate up to 12,500 flashes/min. CE-certified, unit provides accurate speed control with drift-free operation, resolution of Ã-
Read More »