ITT Flygt Corp.
Trumbull, CT 06611
Share:
Portable Submersible Pumps suit limited-space dewatering.
Bibo BS 2102 and BS 2125, with respective diameters of 11Ã-½ and 14 3/8 in., can be used in tight spaces and inside small pipes. High-head BS 2125 develops up to 240 ft of head and delivers up to 240 gpm of liquid, while standard version pumps up to 850 gpm. Pumps feature 2 independent mechanical seals, abrasion-resistant tungsten carbide/carbon seals, and class H insulated motors that...
Read More »
Heavy-Duty Slurry Pump employs high chrome wear parts.
Submersible model 5150 handles various types of slurries and is suited for applications where there are solid granules present that can erode pump volutes, impellers, and wear parts. Spin-out(TM) feature expels abrasive particles from seal chamber, while Plug-in(TM) seal system facilitates seal replacement. Designed with Class H motor capable of handling 15 starts/hr, 105 hp unit develops up to...
Read More »
Mixing/Flushing System cleans retention basins.
Hydroejector acts as mixer when basin water levels are high and automatically becomes flushing device when water levels are low. Unit ensures that all solid materials are resuspended and flushed as basin is emptied, eliminating need for manual cleanup. To avoid clogging problems, pump is equipped with self-cleaning N-impeller. Ejector pipe removes organic matter from basin and features large...
Read More »
Aeration/Mixing System eliminates dead spots in tank.
FloGet provides mixing and simultaneous aeration of all types of liquids. It incorporates submersible pump, air suction tube, and ejector/diffuser nozzle. System is suitable for any type of tank regardless of size, shape, or depth. Using different ejectors, FloGet can perform different tasks, including oxygenation, CO2 neutralization, sludge recycling, ozone treatment, mixing, foam suppression,...
Read More »
Dewatering Pump handles groundwater and wastewater.
Model 3068 cast iron submersible pump delivers up to 260 gpm with max head of 100 ft. It is available with closed, 2 vane solids handling impeller; with vortex impeller; or in chopper version with Ni hard impeller and cutting plate. Pump comes in single-phase and 3-phase versions and is rated 2.3 and 2 hp (single phase) and 2.4 to 3.8 hp (3-phase). It can be mounted on guide rails in deep sumps,...
Read More »
Dewatering Pump is recommended for construction site service.
Model Ready 40 submersible pump is 11Ã-½ in. dia and can be transported to any site. High-head model develops up to 110 ft of head, while standard model pumps up to 440 gpm of liquid. Pump has threaded 4-8 in. hose connection discharge, and employs alloyed cast iron impeller. Nitrile rubber liner protects against abrasive wear around impeller. Pump is made of aluminum, with stainless steel...
Read More »
Submersible Dewatering Pump delivers up to 85 gpm.
Ready 12 portable, 1.4 hp pump employs abrasion resistant thermoplastic polyurethane impeller. Its non-corrosive, stainless steel motor housing and shaft, along with its synthetic material body permits pumping of liquids ranging in pH from 3 to 9. Features include two independent mechanical seals running in non-toxic lubricant and class F motor. Unit weighs 25 lbs, has 7 1/4 in. dia, and can...
Read More »
Slurry Pump employs solid, high chrome casing.
Model 5100 heavy-duty, submersible pump develops up to 130 ft of head and delivers up to 1,400 GPM through its 4 in. discharge. Suitable for use where solid granules are present and can erode pump parts, unit's hydraulic design eliminates need for over-trimming impellers. Impellers feature backvanes to reduce pressure on outer mechanical seals. Motor offers sensors to warn against high...
Read More »
Submersible Pumps do not require cleaning.
N-Pumps employ open-type self-cleaning impeller, and while operating, each leading edge passes across sharp stationary relief-groove. This action ensures that rags, stringy materials and solids are sheared, cleaned from impeller and pumped away. Pumps maintain high level of efficiency, even in fluids with high solids and fibrous content.
Read More »
Portable Submersible Pumps suit limited-space dewatering.
Bibo BS 2102 and BS 2125, with respective diameters of 11Ã-½ and 14 3/8 in., can be used in tight spaces and inside small pipes. High-head BS 2125 develops up to 240 ft of head and delivers up to 240 gpm of liquid, while standard version pumps up to 850 gpm. Pumps feature 2 independent mechanical seals, abrasion-resistant tungsten carbide/carbon seals, and class H insulated motors that...
Read More »
Heavy-Duty Slurry Pump employs high chrome wear parts.
Submersible model 5150 handles various types of slurries and is suited for applications where there are solid granules present that can erode pump volutes, impellers, and wear parts. Spin-out(TM) feature expels abrasive particles from seal chamber, while Plug-in(TM) seal system facilitates seal replacement. Designed with Class H motor capable of handling 15 starts/hr, 105 hp unit develops up to...
Read More »
Mixing/Flushing System cleans retention basins.
Hydroejector acts as mixer when basin water levels are high and automatically becomes flushing device when water levels are low. Unit ensures that all solid materials are resuspended and flushed as basin is emptied, eliminating need for manual cleanup. To avoid clogging problems, pump is equipped with self-cleaning N-impeller. Ejector pipe removes organic matter from basin and features large...
Read More »
Aeration/Mixing System eliminates dead spots in tank.
FloGet provides mixing and simultaneous aeration of all types of liquids. It incorporates submersible pump, air suction tube, and ejector/diffuser nozzle. System is suitable for any type of tank regardless of size, shape, or depth. Using different ejectors, FloGet can perform different tasks, including oxygenation, CO2 neutralization, sludge recycling, ozone treatment, mixing, foam suppression,...
Read More »
Dewatering Pump handles groundwater and wastewater.
Model 3068 cast iron submersible pump delivers up to 260 gpm with max head of 100 ft. It is available with closed, 2 vane solids handling impeller; with vortex impeller; or in chopper version with Ni hard impeller and cutting plate. Pump comes in single-phase and 3-phase versions and is rated 2.3 and 2 hp (single phase) and 2.4 to 3.8 hp (3-phase). It can be mounted on guide rails in deep sumps,...
Read More »
Dewatering Pump is recommended for construction site service.
Model Ready 40 submersible pump is 11Ã-½ in. dia and can be transported to any site. High-head model develops up to 110 ft of head, while standard model pumps up to 440 gpm of liquid. Pump has threaded 4-8 in. hose connection discharge, and employs alloyed cast iron impeller. Nitrile rubber liner protects against abrasive wear around impeller. Pump is made of aluminum, with stainless steel...
Read More »
Submersible Dewatering Pump delivers up to 85 gpm.
Ready 12 portable, 1.4 hp pump employs abrasion resistant thermoplastic polyurethane impeller. Its non-corrosive, stainless steel motor housing and shaft, along with its synthetic material body permits pumping of liquids ranging in pH from 3 to 9. Features include two independent mechanical seals running in non-toxic lubricant and class F motor. Unit weighs 25 lbs, has 7 1/4 in. dia, and can...
Read More »
Slurry Pump employs solid, high chrome casing.
Model 5100 heavy-duty, submersible pump develops up to 130 ft of head and delivers up to 1,400 GPM through its 4 in. discharge. Suitable for use where solid granules are present and can erode pump parts, unit's hydraulic design eliminates need for over-trimming impellers. Impellers feature backvanes to reduce pressure on outer mechanical seals. Motor offers sensors to warn against high...
Read More »
Submersible Pumps do not require cleaning.
N-Pumps employ open-type self-cleaning impeller, and while operating, each leading edge passes across sharp stationary relief-groove. This action ensures that rags, stringy materials and solids are sheared, cleaned from impeller and pumped away. Pumps maintain high level of efficiency, even in fluids with high solids and fibrous content.
Read More »