ControlAir, Inc.
Amherst, NH 03031-2315
Miniature Air Pressure Regulator delivers precision operation.
Accommodating applications requiring pressure control under variable operating conditions, Type-90 provides tight regulation and repeatability to valves and other automatic control equipment. Effect of supply variation is less than 0.5 psig for 100 psig change. Along with 2 gauge ports, reversible bracket, and pressure ranges up to 120 psig, regulator offers 14 scfm flow capacity at 150 psig...
Read More »Air Filter Regulator withstands salt water environments.
Built to resist corrosion, Type-300 Gulf Buster Filter Regulator features aluminum body, stainless steel trim and internals, as well as all-stainless steel external hardware. It provides constant control under variable flow rates and supply pressures, while aspirator design helps maintain set pressure at higher flow levels. Designed to provide instrument-quality air to range of pneumatic tools...
Read More »
Explosion-Proof I/P Transducer is ATEX-compliant.
Designed for applications in hazardous environments, Type-950XP converts 4-20 mA signal to proportionally linear pneumatic output to actuate valves. It complies with ATEX directive 94/9/EC and is approved by FM, CSA, and Cenelec for explosionproof applications. Able to process impure air, unit features NEMA 4X housing, tapped exhaust option, and electronic feedback control. Transducer, accurate...
Read More »
Pressure Regulator withstands harsh environments.
Housed in NEMA 4X enclosure, Type 900X current-to-pressure (I/P) and voltage-to-pressure (E/P) transducer is available with zero-based units ranging from 0-7.5 to 0-60 psi outputs. Output pressures of up to 100 psig can be direct/reverse acting, full/split rangable, and do not need pre-regulation. Compliant with ATEX directive 94/9/EC, unit provides accuracy of Ã-
Read More »
Pneumatic/Filter Regulators are made of stainless steel.
Designed to withstand harsh environments, Type 350/360/370SS Series are available with automatic drain option, low-temperature option for arctic applications, and stainless steel filter. Construction also includes 316 stainless steel housing and fluorocarbon diaphragm. Compatible with sour gas and adaptable to off shore environments, products meet all NACE standard MR-0175 requirements for...
Read More »High Flow Volume Booster delivers throttling control.
Offered in aluminum or 316 SS, Type 6000 provides 1-to-1 signal-to-output relay, that when used with positioner/actuator, increases stroking speed of control valves. Integral bypass valve provides system stability while allowing normal positioner airflow and normal valve actuation with small input changes. Max signal pressure of 150 psig to volume booster provides output pressure up to 150 psig...
Read More »
Pressure Regulator reduces high inlet pressures.
Type 3500 High Pressure Regulator reduces inlet pressures from as high as 6,000 psig down to working pressures from 0-225 psig. Designed to be used in applications with various gases, self-operated unit is offered with choice of 3 output ports to facilitate hookup. Product features replaceable nylon valve seat and provides outlet pressure in 3 spring ranges: 0-125, 0-150, and 0-225 psig. Socket...
Read More »
Electronic Pressure Regulator features ATEX compliance.
Miniature Electropneumatic Type-550X converts variable signal to proportional pneumatic output. Built-in volume booster provides up to 20 scfm air flow capacity. Standard and zero-based units utilize input signal of 4-20 mA. Output pressure for standard range includes 3-15, 3-27, 6-30, 2-60, and 3-120 psig, while zero-based range outputs include 0-30, 0-60, and 0-120 psig. Regulator features NEMA...
Read More »
P/I Transducers withstand hazardous environments.
Models P200 and P290 pneumatic-to-current transducers convert standard 3-15, 3-27, or 6-30 psig air pressures into 2-wire 4-20 or 10-50 mA signal with total accuracy up to Ã-
Read More »
Pressure Regulator utilizes DeviceNet(TM) protocol.
Multi-Station, Digital-to-Pneumatic Type 5500 uses common air supply to provide electronic proportional control of output pressure from any combination of 4, 6, or 8 station units through use of DeviceNet communication protocol. Output ranges include 3-15, 3-27, 6-30, 2-60, and 3-120 psig. Maximum supply pressure is 150 psig, and temperature limits range from -20 to 150Ã-ºF. Built-in volume...
Read More »Controlair Launches New Website
Amherest, NH, USA – September 2019 - ControlAir, Inc., a leading manufacturer of precision pneumatic and electro-pneumatic controls announced today a redesigned www.controlair.com. The web site is faster, easier to access from all web browsers, note pad computers and mobile devices and also incorporates a new ‘filtered results’ tool on the product pages. The redesign will provide...
Read More »ControlAir Inc. is Pleased to Announce Our Quality Certification Under ISO 9001:2015
AMHERST, NH, USA – May 2018 —ControlAir, Inc., a leading manufacturer of precision pneumatic and electro-pneumatic controls, has achieved ISO 9001:2015 certification of its Quality Management System. The Certificate of Registration was issued by International Quality Registrars on February 9, 2018. The company previously earned certification under ISO 9001:2008 in 2010 and has been audited...
Read More »ControlAir Announces Changes, Additions to Management Team
ControlAir Inc. is pleased to announce that Jon Daley has joined the Company as Director of Sales and Marketing and Cameron Crooks has joined as Midwest Regional Sales Manager. Jon Daley joined ControlAir as Director of Sales and Marketing October of 2016. Most recently, he held product and engineering management positions in the motion control industry. Daley held the positions of Product Line...
Read More »ControlAir, Inc. Announces New Mobile Website
AMHERST, NH, USAÃ- -Ã- ControlAir, Inc., a leading manufacturer of precision pneumatic and electro-pneumatic controls announced today that it has launched a mobile version of the ControlAir website. Accessible from any web-enabled phone or smartphone, the site connects customers, wherever they may be, with the latest product information. Smartphone users will be automatically directed to...
Read More »ControlAir, Inc. Launches New Website
AMHERST, NH, USA - November 2011 - ControlAir, Inc., a leading manufacturer of precision pneumatic and electro-pneumatic controls announced today a redesigned www.controlair.com. The web site is faster, easier to access from all web browsers, note pad computers and mobile devices and also incorporates a search tool on the new home page. The redesign will provide customers with an easy, quick way...
Read More »
Miniature Air Pressure Regulator delivers precision operation.
Accommodating applications requiring pressure control under variable operating conditions, Type-90 provides tight regulation and repeatability to valves and other automatic control equipment. Effect of supply variation is less than 0.5 psig for 100 psig change. Along with 2 gauge ports, reversible bracket, and pressure ranges up to 120 psig, regulator offers 14 scfm flow capacity at 150 psig...
Read More »New Literature Release from ControlAir, Inc.
AMHERST, NH, USA - January 2011 - ControlAir Inc. has released a redesigned Short Form Catalog which includes new products and industry approvals to its line of Precision Air Pressure Regulators, Transducers and Relays. The redesigned catalog will provide customers with an easy, quick way to locate the most up-to-date product information, specifications and industry standards. Regulators,...
Read More »Air Filter Regulator withstands salt water environments.
Built to resist corrosion, Type-300 Gulf Buster Filter Regulator features aluminum body, stainless steel trim and internals, as well as all-stainless steel external hardware. It provides constant control under variable flow rates and supply pressures, while aspirator design helps maintain set pressure at higher flow levels. Designed to provide instrument-quality air to range of pneumatic tools...
Read More »New Literature Release from ControlAir, Inc.
AMHERST, NH, USA - June, 2007-ControlAir Inc. has released a redesigned Short Form Catalog which includes new products and industry approvals to its line of Precision Air Pressure Regulators, Transducers and Relays. The redesigned catalog will provide customers with an easy, quick way to locate the most up-to-date product information, specifications and industry standards. Regulators, transducers...
Read More »
Explosion-Proof I/P Transducer is ATEX-compliant.
Designed for applications in hazardous environments, Type-950XP converts 4-20 mA signal to proportionally linear pneumatic output to actuate valves. It complies with ATEX directive 94/9/EC and is approved by FM, CSA, and Cenelec for explosionproof applications. Able to process impure air, unit features NEMA 4X housing, tapped exhaust option, and electronic feedback control. Transducer, accurate...
Read More »