Aved Electronics
North Billerica, MA 01862
Cable Harnesses suit automation and robotic equipment.
Custom Cable Harnesses are manufactured to specification with regard to flexibility and cycling, exposure to chemicals and harsh environments, signal and power requirements, and connector types. Featuring 100% electrical and mechanical testing, units are UL/CSA approved and can be fabricated from 4-30 ga wire with virtually any type of positive locking connector and quick-disconnect. Harnesses...
Read More »
Lithium Batteries power RFID transponders.
RFID Lithium Batteries can be supplied in lithium-thionyl chloride, lithium-sulfur dioxide, and lithium-manganese dioxide chemistries to power RFID transponders in material handling tracking systems. They operate over -40 to +70Ã-
Read More »
Watertight Battery Packs feature lock-in-place design.
Designed to ensure proper insertion, Custom Battery Packs feature positive, snap-in locking construction for use in clinical environments. They provide consistent voltage output from 10.6-12 Vdc; offer stable charge retention for up to 30 days, depending upon chemistry; and can be recharged within 1 hr. UL/CSA approved units can be made from lithium, Li-Ion, NiMH, NiCad, Alkaline, and lead acid...
Read More »
Cable Harnesses are certified to IPC-A-620 specifications.
Custom engineered Multi-Conductor Cable Harnesses are built on back-wired systems that permit production of harnesses with up to 1,000 conductors and provide Go-No-Go Test on all terminations. Harnesses conform to MIL-I-45208A and are hand soldered in accordance with MIL-S-45743, MIL-STD-1460, and MIL-STD-2000; and are packaged per MIL-STD-129 specifications. Applications include military ground...
Read More »
Lithium Batteries are fabricated for specific applications.
Suited for military, medical, and industrial applications, Lithium Primary Batteries can be supplied individually or as custom-fabricated battery packs to match energy density, discharge rate, and life requirements of specific applications. Physical package, wiring, and connector types are all matched to user specification. Available chemistries include lithium thionyl chloride, lithium manganese...
Read More »
RF Cable Assemblies achieve uniform MIL-Spec quality.
RF Cable Assemblies are custom-manufactured using fully automated cutting, stripping, and connectorizing equipment. Available with BNC, TNC, LC, SC, SMA, and N type connector, units can include 50-150 Ohm cables up to 1 in. OD in varying lengths. Each is 100% electrically and mechanically tested and UL/CSA approved. Suited for inside- or outside-the-box applications, assemblies feature PTFE or...
Read More »
Assemblies combine components, enclosures and cabling.
Small Box Assemblies simplify engineering, purchasing, and assembly by combining multiple components into one package with one part number. Featuring custom battery packs, motors, fan trays, panels, meters, enclosures, cables, and connectors, assemblies are 100% electrically and mechanically tested and can be UL/CSA approved. Batteries can include Li-Ion, NiCad, NiMH, and others, and cable...
Read More »
Cable Assemblies are manufactured to customer requirements.
Electrical and microwave telecommunication cable assemblies are custom manufactured using RF connectors and coax/triax cables to meet specific design requirements. Featuring potted and encapsulated connectors, strain-relief boots, and other special related materials, UL/CSA approved assemblies can be built to withstand extreme conditions. For military use, they can be hand soldered and certified...
Read More »
Back-Up Battery Packs meet specific applications.
Custom Back-Up Battery Packs are developed using chemistry that best matches application with respect to energy density, discharge rates, environment, packaging, and connectivity. They can include lead acid, Li-Ion, NiCad, and NiMH chemistries. Choice of connector types include flying leads, pressure contacts, and quick-disconnects.
Read More »
Military Cable Assemblies suit vehicles and airborne systems.
Aved Military Cable Assemblies are custom engineered and manufactured using all appropriate MIL-Spec wire, cable, boots, transitions, tubing, contacts, terminals, connectors, backshells, and adapters. With hand soldering certified to MIL-S-45743, MIL-STD-1460, and MIL-STD-2000, assemblies integrate RF and DC wiring and are packaged as required by MIL-Specifications. Assemblies are built on custom...
Read More »
Cable Harnesses suit automation and robotic equipment.
Custom Cable Harnesses are manufactured to specification with regard to flexibility and cycling, exposure to chemicals and harsh environments, signal and power requirements, and connector types. Featuring 100% electrical and mechanical testing, units are UL/CSA approved and can be fabricated from 4-30 ga wire with virtually any type of positive locking connector and quick-disconnect. Harnesses...
Read More »
Lithium Batteries power RFID transponders.
RFID Lithium Batteries can be supplied in lithium-thionyl chloride, lithium-sulfur dioxide, and lithium-manganese dioxide chemistries to power RFID transponders in material handling tracking systems. They operate over -40 to +70Ã-
Read More »
Watertight Battery Packs feature lock-in-place design.
Designed to ensure proper insertion, Custom Battery Packs feature positive, snap-in locking construction for use in clinical environments. They provide consistent voltage output from 10.6-12 Vdc; offer stable charge retention for up to 30 days, depending upon chemistry; and can be recharged within 1 hr. UL/CSA approved units can be made from lithium, Li-Ion, NiMH, NiCad, Alkaline, and lead acid...
Read More »
Cable Harnesses are certified to IPC-A-620 specifications.
Custom engineered Multi-Conductor Cable Harnesses are built on back-wired systems that permit production of harnesses with up to 1,000 conductors and provide Go-No-Go Test on all terminations. Harnesses conform to MIL-I-45208A and are hand soldered in accordance with MIL-S-45743, MIL-STD-1460, and MIL-STD-2000; and are packaged per MIL-STD-129 specifications. Applications include military ground...
Read More »
Lithium Batteries are fabricated for specific applications.
Suited for military, medical, and industrial applications, Lithium Primary Batteries can be supplied individually or as custom-fabricated battery packs to match energy density, discharge rate, and life requirements of specific applications. Physical package, wiring, and connector types are all matched to user specification. Available chemistries include lithium thionyl chloride, lithium manganese...
Read More »
RF Cable Assemblies achieve uniform MIL-Spec quality.
RF Cable Assemblies are custom-manufactured using fully automated cutting, stripping, and connectorizing equipment. Available with BNC, TNC, LC, SC, SMA, and N type connector, units can include 50-150 Ohm cables up to 1 in. OD in varying lengths. Each is 100% electrically and mechanically tested and UL/CSA approved. Suited for inside- or outside-the-box applications, assemblies feature PTFE or...
Read More »
Assemblies combine components, enclosures and cabling.
Small Box Assemblies simplify engineering, purchasing, and assembly by combining multiple components into one package with one part number. Featuring custom battery packs, motors, fan trays, panels, meters, enclosures, cables, and connectors, assemblies are 100% electrically and mechanically tested and can be UL/CSA approved. Batteries can include Li-Ion, NiCad, NiMH, and others, and cable...
Read More »
Cable Assemblies are manufactured to customer requirements.
Electrical and microwave telecommunication cable assemblies are custom manufactured using RF connectors and coax/triax cables to meet specific design requirements. Featuring potted and encapsulated connectors, strain-relief boots, and other special related materials, UL/CSA approved assemblies can be built to withstand extreme conditions. For military use, they can be hand soldered and certified...
Read More »
Back-Up Battery Packs meet specific applications.
Custom Back-Up Battery Packs are developed using chemistry that best matches application with respect to energy density, discharge rates, environment, packaging, and connectivity. They can include lead acid, Li-Ion, NiCad, and NiMH chemistries. Choice of connector types include flying leads, pressure contacts, and quick-disconnects.
Read More »
Military Cable Assemblies suit vehicles and airborne systems.
Aved Military Cable Assemblies are custom engineered and manufactured using all appropriate MIL-Spec wire, cable, boots, transitions, tubing, contacts, terminals, connectors, backshells, and adapters. With hand soldering certified to MIL-S-45743, MIL-STD-1460, and MIL-STD-2000, assemblies integrate RF and DC wiring and are packaged as required by MIL-Specifications. Assemblies are built on custom...
Read More »