Fishman Corporation
Hopkinton, MA 01748
Safety Needle Manufacturer Points to Higher Yields with Precision Air-Free Adhesives Dispenser
Specialized Health Products, Inc. (SHPI), based in Bountiful, Utah, is a developer, manufacturer and marketer of proprietary safety medical devices, designed to minimize the risk of accidental needlesticks - often referred to as Safety Needles. SHPI has developed multiple safety needle products based upon two primary technology platforms, which apply to virtually all medical needles used today....
Read More »
Dispense Gun Stand places gun vertically or horizontally.
Available in benchtop or wall-mount versions, Model LDS9000 is powder coated and painted black with 4 rubber feet on bottom of base that give dispensing gun secure, non-skid resting place. User can install Gun Stand to vertical support with longer of 2 flanges on bottom. In vertical mode, Gun Stand will give user additional space on benchtop, while keeping 30cc dispense gun safely out of the way...
Read More »
Dispensing Needles are offered with variety of options.
Disposable Dispensing Needles incorporate helical thread on polypropylene hub that locks into syringe and has positive stop inside -
Read More »
Disposable Cartridges suit pneumatic and manual dispensing.
Disposable Plastic Cartridges are offered in 6 sizes from 1-32 oz, as well as 1/10th gal, with compatible plungers, seals, flange caps, and various nozzles in 2, 4, 6, 8, and 10 in. lengths. Available in low- or high-density polyethylene, cartridges have -¼ in. NPT female threads with internal valve seal and minimum burst strength of 100 psi. They are suited for adhesives, epoxies, lubricants,...
Read More »
Polypropylene Syringes apply small dots, beads, and potting.
Industrial Polypropylene Syringes, offered in 3 colors and 6 sizes, dispense light and viscous fluids. They feature zero-draft barrel IDs, drip-free pistons, .092 in. wide dispensing orifice, and ANSI/HIMA MD70-1-1983 standard luer lock threads. Offered in 1-50 cc sizes, silicone-free syringes are available in black for visible curing applications, yellow UV block translucent for up to 390 nm,...
Read More »
Dispensing System uses air-free, mechanical drive.
Model LDS9000 features handheld gun with linear actuator-driven mechanical lead screw that smoothly pushes adhesive through plastic syringe. Dispense volume, flow rate, drawback, and drawback delay rate are programmable. Providing fully repeatable dispensing, system operates without pulsation and pounding of pneumatic dispensing systems. When dispense cycle is finished, system pulls plunger back...
Read More »
Blower Hose offers high compressibility.
Retractable Blower Hose is offered in EDW thermally bonded, PVC coated polyester fabric, reinforced with steel spring wire for temperatures from -20-
Read More »
Pneumatic Dispenser has pedal-controlled vacuum pickup pen.
Suited for assembly and repair of small parts, Model 8500(TM) offers 2 independent vacuum and air modules with separate foot pedals for controlling pickup pen and handheld syringe. Bench-top workstation frees both hands for manual operation and provides timed dispensing from 0.1 sec to over 3 min. With adjustment knobs to control each function, unit provides up to 100 psi dispensing pressure, has...
Read More »
Needles come in standard and custom configurations.
Made from 304 stainless steel with nickel-plated brass hubs, reusable needles can be supplied in sizes from 8 to 25 Ga in lengths up to 5 ft. Provided with luer lock, luer slip (press fit), threaded 5/16-28, and 1/8 and -¼ NPT male connections, they can be supplied with different bends and precision machined point styles. Burr-free needles can be finished with surface treatments such as...
Read More »
Syringes apply small dots, beads, and potting.
Polypropylene Syringes feature zero-draft barrel IDs, drip-free pistons for dispensing light fluids, .062 in. wide dispensing orifice for proper fluid flow, and ANSI/HIMA MD70-1-1983 standard luer lock threads. They are offered in black for visible curing, yellow UV block translucent for up to 390 nm, and clear for dispensing epoxies, glues, adhesives, and solder paste. Sizes range from 1 to 50...
Read More »Airfree® Technology from Fishman® Corporation Improves the Validation to Production Process
Hopkinton, MA—Fishman® Corporation, maker of innovative assembly fluid dispensing systems for the medical device, electronics, fiber optics, automotive and aerospace industries, addresses the need for improving the validation to production process with its patented AirFree® Technology. Until the emergence of AirFree® Technology, manufacturers were at a disadvantage. The reason for this is...
Read More »Safety Needle Manufacturer Points to Higher Yields with Precision Air-Free Adhesives Dispenser
Specialized Health Products, Inc. (SHPI), based in Bountiful, Utah, is a developer, manufacturer and marketer of proprietary safety medical devices, designed to minimize the risk of accidental needlesticks - often referred to as Safety Needles. SHPI has developed multiple safety needle products based upon two primary technology platforms, which apply to virtually all medical needles used today....
Read More »New Website for Fishman Corporation
A comprehensive, fully functional website is now available from Fishman Corporation. Detailed product information, performance specifications, white papers on dispensing technology, articles published in trade journals, and online catalogs are provided for Fishman's extensive line of hand-held and mounted dispensing systems, syringes, and accessories. Featured is the company's LDS9000 AirFree(TM)...
Read More »
Dispense Gun Stand places gun vertically or horizontally.
Available in benchtop or wall-mount versions, Model LDS9000 is powder coated and painted black with 4 rubber feet on bottom of base that give dispensing gun secure, non-skid resting place. User can install Gun Stand to vertical support with longer of 2 flanges on bottom. In vertical mode, Gun Stand will give user additional space on benchtop, while keeping 30cc dispense gun safely out of the way...
Read More »
Dispensing Needles are offered with variety of options.
Disposable Dispensing Needles incorporate helical thread on polypropylene hub that locks into syringe and has positive stop inside -
Read More »
Disposable Cartridges suit pneumatic and manual dispensing.
Disposable Plastic Cartridges are offered in 6 sizes from 1-32 oz, as well as 1/10th gal, with compatible plungers, seals, flange caps, and various nozzles in 2, 4, 6, 8, and 10 in. lengths. Available in low- or high-density polyethylene, cartridges have -¼ in. NPT female threads with internal valve seal and minimum burst strength of 100 psi. They are suited for adhesives, epoxies, lubricants,...
Read More »
Polypropylene Syringes apply small dots, beads, and potting.
Industrial Polypropylene Syringes, offered in 3 colors and 6 sizes, dispense light and viscous fluids. They feature zero-draft barrel IDs, drip-free pistons, .092 in. wide dispensing orifice, and ANSI/HIMA MD70-1-1983 standard luer lock threads. Offered in 1-50 cc sizes, silicone-free syringes are available in black for visible curing applications, yellow UV block translucent for up to 390 nm,...
Read More »
Dispensing System uses air-free, mechanical drive.
Model LDS9000 features handheld gun with linear actuator-driven mechanical lead screw that smoothly pushes adhesive through plastic syringe. Dispense volume, flow rate, drawback, and drawback delay rate are programmable. Providing fully repeatable dispensing, system operates without pulsation and pounding of pneumatic dispensing systems. When dispense cycle is finished, system pulls plunger back...
Read More »
Blower Hose offers high compressibility.
Retractable Blower Hose is offered in EDW thermally bonded, PVC coated polyester fabric, reinforced with steel spring wire for temperatures from -20-
Read More »
Pneumatic Dispenser has pedal-controlled vacuum pickup pen.
Suited for assembly and repair of small parts, Model 8500(TM) offers 2 independent vacuum and air modules with separate foot pedals for controlling pickup pen and handheld syringe. Bench-top workstation frees both hands for manual operation and provides timed dispensing from 0.1 sec to over 3 min. With adjustment knobs to control each function, unit provides up to 100 psi dispensing pressure, has...
Read More »