ETCO
Bradenton, FL 34203
Wire Terminal Applicator offers single stroke operation.
Designed for producing fire-retardant insulated disconnects, ETCO Insulated Mighty-Mini Wire Terminal Applicator is air-operated device that applies F-crimp to disconnect on down stroke and adds fire-retardant nylon insulator on way back up. It can produce up to 5,000 terminations/hr. Featuring 1-piece cast body and rigid, thick base, it is suited for use with automatic equipment and manual bench...
Read More »
Overmolded Lead Frames create one integrated part.
Enabling OEMs to simplify designs by using single stamped piece, Overmolded Lead Frames can be made to customer specification using wide variety of stamped metals and plastics. Units are developed using rapid prototyping with 3D solid modeling analysis, and can be manufactured from virtually any alloy including medical grade, titanium, platinum, stainless, and copper alloys. Lead frames are...
Read More »
Power Cord Assembly speeds fabrication and molding.
Designed to hold standard brass blades and ground pin within polypropylene housing, Male Bridge Power Cord Assembly features crimp ears that are uniformly positioned to accept 3-wires in one step. Wires can be attached manually or by automatic equipment. Creating rigid form factor, assembly is offered in 2 sizes for 10-12 and 18-14 gauge wires. Blades are UL 1659 certified.
Read More »
Electrical Splice features unisex, self-locking disconnect.
Designed with large surface contact area, Flat-Snap(TM) Splice can rapidly mate and unmate without force or performance degradation, and cannot pull apart or vibrate loose under adverse conditions. Unisex design facilitates assembly, inventory, and repairs, and prevents accidental disconnection. Offered in 0.012-0.020 in. thick brass, splice can be modified to OEM requirements as posi-loc...
Read More »
Connector Test Tabs are RoHS and ELV compliant.
Made from brass, ETCO .250 Fast Test Tabs are designed with dimple to mate with all standard .032 x .250 receptacles. Units are suited for use with all force measurement equipment and come in .110 x .032, .110 x .020, .187 x .032, and .187 x .020 configurations. Lead-free products meet all UL-310 safety standards, and are ISO/TS 16949 certified.
Read More »
IDC Terminals provide one-step attachment.
Custom ETCO IDC (insulation displacement connection) Terminals promote accelerated assembly of 30 or more wires into one terminal by integrating set of blades into connector design that cut through wire insulation. Suited for solid wire applications from 18-28 Ga, connectors utilize preloaded internal contacts for wire attachment, create gas-tight contacts, and eliminate need for wire stripping...
Read More »Automotive Booters apply insulators onto ignition wires.
Air-operated, benchtop Booters let users apply rubber insulators onto spark plugs and distributor wire terminals at their own facility. Featuring foot-pedal actuation, semi-automatic units spread boot over terminals without damaging wire seal area and come in 3 models for straight-, right-, and variable angled boots. Fully adjustable for length of wire and seal end, Booters handle variety of...
Read More »Spark Plug Boot meets ISO/TS 16949:2002 standards.
High density, high temperature silicone molded AB19 spark plug boot is used for traditional coil and ignition wire systems in Ford V6 and V8 engines from 1992 through current year. Featuring 115Ã-
Read More »High-Temperature Alloy is suited for electrical terminals.
Offered as alternative to nickel-plated steel and beryllium alloys, HT Alloy can be used for manufacturing standard and custom electrical terminals. It is resistant to stress relaxation at up to 200Ã-
Read More »Battery Terminals comply with RoHS lead-free directive.
Clamp-style, Automotive Battery Terminals mate with positive and negative battery posts and accept wire sizes from 25,910-115,150 CMA per SAE standards. Open barrel F-crimp ear section provides secure connection. Supplied in strip form or as loose pieces, lead-free terminals can be manufactured from brass, steel, and exotic alloys. They are provided with variety of plating options including...
Read More »ETCO Begins Manufacturing of Pancon Electrical Terminals
March 11, 2020 - - Bradenton, FL - - The ETCO Corporation, today announced that it will begin manufacturing Pancon’s electric terminal product line. Pancon has phased out production in its two manufacturing facilities in Massachusetts and California. ETCO has purchased many of Pancon’s dies which allows ETCO to serve the production needs of former Pancon customers and help minimize any...
Read More »ETCO Incorporated Celebrates 70 Years of Manufacturing within the United States
ETCO Incorporated is celebrating 70 years of operating independently as a manufacturer of custom precision stampings. The company has manufactured these products in Rhode Island since its inception in 1947 and at its automotive headquarters in Bradenton, Florida since 1978. The products engineered and manufactured by ETCO have been used in over 500 million end use applications since the first...
Read More »ETCO Incorporated Announces 97% Manufacturing Supplier Scorecard Average for Second Quarter
Manufacturer of custom precision stampings for automotive, appliance and medical device industries announces increase in supplier scorecard average from 95% to 97% ETCO Incorporated announced that it has achieved a 97% manufacturing vendor rating from external surveys given to manufacturers from various industries it supplies. The company saw an increase in its already high rating of 95% to an...
Read More »Guide to Quality Crimps Poster Describes Wire, Connectors and Tooling
A new poster that explains in English, Spanish and Chinese the function and interaction between a wire, connectors and tooling to assure quality crimps is being offered by ETCO Incorporated of Warwick, Rhode Island, U.S.A. The ETCO Guide to Quality Crimps Poster explains the relationship between a wire, connector and tooling to assure the production of high quality F and B crimps. Fully...
Read More »New ETCO Web Site Features Connectors, Terminals & Applicators
A new web site that describes a full range of standard and custom connec-tors, terminals, and application equipment for a wide range of industries is being introduced by ETCO Incorporated of Warwick, Rhode Island. The ETCO Web site features four major sections: standard-, engineered-, automotive-products, and applications equipment and describes the firm's two manufacturing divisions. Providing...
Read More »
Wire Terminal Applicator offers single stroke operation.
Designed for producing fire-retardant insulated disconnects, ETCO Insulated Mighty-Mini Wire Terminal Applicator is air-operated device that applies F-crimp to disconnect on down stroke and adds fire-retardant nylon insulator on way back up. It can produce up to 5,000 terminations/hr. Featuring 1-piece cast body and rigid, thick base, it is suited for use with automatic equipment and manual bench...
Read More »
Overmolded Lead Frames create one integrated part.
Enabling OEMs to simplify designs by using single stamped piece, Overmolded Lead Frames can be made to customer specification using wide variety of stamped metals and plastics. Units are developed using rapid prototyping with 3D solid modeling analysis, and can be manufactured from virtually any alloy including medical grade, titanium, platinum, stainless, and copper alloys. Lead frames are...
Read More »
Power Cord Assembly speeds fabrication and molding.
Designed to hold standard brass blades and ground pin within polypropylene housing, Male Bridge Power Cord Assembly features crimp ears that are uniformly positioned to accept 3-wires in one step. Wires can be attached manually or by automatic equipment. Creating rigid form factor, assembly is offered in 2 sizes for 10-12 and 18-14 gauge wires. Blades are UL 1659 certified.
Read More »
Electrical Splice features unisex, self-locking disconnect.
Designed with large surface contact area, Flat-Snap(TM) Splice can rapidly mate and unmate without force or performance degradation, and cannot pull apart or vibrate loose under adverse conditions. Unisex design facilitates assembly, inventory, and repairs, and prevents accidental disconnection. Offered in 0.012-0.020 in. thick brass, splice can be modified to OEM requirements as posi-loc...
Read More »
Connector Test Tabs are RoHS and ELV compliant.
Made from brass, ETCO .250 Fast Test Tabs are designed with dimple to mate with all standard .032 x .250 receptacles. Units are suited for use with all force measurement equipment and come in .110 x .032, .110 x .020, .187 x .032, and .187 x .020 configurations. Lead-free products meet all UL-310 safety standards, and are ISO/TS 16949 certified.
Read More »