Bud Industries, Inc.
Willoughby, OH 44094

Plastic Enclosures provide impact resistance.
Offered in 15 sizes from 2.56 x 1.97 x 2.17 in. to 22.05 x 11.02 x 5.12 in., PTS Series is made of impact-resistant gray polycarbonate reinforced with 10% fiberglass. IP67 rating combined with continuous foam gasket provides solution for housing sensitive equipment in hazardous, dusty, and washdown environments, as well as wet outdoor locations. Available with optional clear plastic cover,...
Read More »
Die-Cast Aluminum Boxes feature IP68 rating.
Combining corrosion-resistant die-cast aluminum construction with continuous silicon gasket, AN-A Series can house sensitive equipment in hazardous, dusty, and washdown factory environments, as well as in wet outdoor locations. Enclosures are available in 24 sizes ranging from 3.54 x 1.42 x 1.18 in. to 10.24 x 6.30 x 3.56 in., suited for machine controls, security, lighting, instrument cases,...
Read More »Explosionproof Enclosures provide safety for designs and workers.
Made of die-cast aluminum and sealed with continuous silicon rubber gasket, ATX Series is rated for such explosive atmospheres as grain dust and conductive dust (Zones 21, 22) and certified to ATEX II 2 G Ex e IIC Gb and ATEX II 2 D Ex tb IIIC Db. Aluminum body is powder coated, and captive screws in cover are stainless steel. Rated for -50 to +135-
Read More »
PCB Enclosures feature IP66 rating.
Made of anodized aluminum extrusion- with grooves for heat dissipation, EXN Series is available with polycarbonate plastic or powder-coated die-cast aluminum endcap covers that can be removed to slide in printed circuit board. Exterior has built-in 0.5 mm recessed area on which product label can be affixed and/or printed on directly. Available in 17- sizes ranging from 2.7 x 1.39 x 1.93 in. to...
Read More »
IP66 Aluminum Enclosure suits DIN rail applications.
Used independently or mounted on- 35 mm DIN rail, IP66-rated DMX Series is made of extruded aluminum and features polycarbonate plastic endcaps. Latter have UL94-V0 flammability rating and are sealed with EPDM gasket. Integrated slots allow for mounting up to 3 PCBs, which are offered as optional accessories, and available modifications- include holes, slots, or cutouts. There are 6 sizes...
Read More »
Enclosure Vent facilitates heat and moisture dissipation.
Suited for outdoor use, IPV Series PC/PC Wide Opening External Vent allows circulation of air while protecting againt rain water and falling debris. Both 2.91 x 2.91 x 1.1 in. and 3.95 x 3.95 x 1.25 in. models, constructed of gray polycarbonate plastic and 10% fiberglass, withstand exposure to UV light and water in accordance with UL 746C. Also able to be used- indoors,- product features...
Read More »
Plastic Push Button Box offers alternative to steel.
Offering corrosion resistance in washdown, humid, and outdoor environments, PBB Push Button Box carries NEMA 4X/IP67 rating and meets requirements of UL 746C with respect to UV light and water exposure. Construction combines polycarbonate plastic and 10% fiberglass for combined shatter resistance and molding consistency. Latter results in tight tolerances and seal reliability. Gray PBB Push...
Read More »
Molded Plastic Electronics Enclosure carries IP67, NEMA ratings.
Rated to NEMA 1/2/4/4x and IP67, PIP Series- seals out water and dust to protect electronics. Enclosure is made from polycarbonate plastic enhanced with 10% fiberglass, and design ensures precise component fit without rework. Box cover is polycarbonate, and- clear polycarbonate lid is available to facilitate and accelerate inspection. Offered in sizes from 3.15 x 1.18 x 1.37 in. to 10.04 x 4.92...
Read More »
Tablet Enclosures meet IP65 rating for waterproofing and dust.
Featuring clamshell design that fits together with tongue and groove seal, Bud Tablet Enclosures provide protection for electronics used in industrial automation and control as well as other mission-critical applications that might involve harsh environmental conditions. Sizes range from 5.5 x 3.9 x 1.2 in. to 12.7 x 9.1 x 1.2 in., and high-impact ABS plastic construction is flame retardant to...
Read More »
Electronic Enclosure organizes multiple development boards.
Using flat or folded approach, Board-ganizer keeps components of design project in one place, and facilitates storage and transport of breadboarded designs. PC development boards attach to enclosure using adhesive rubber feet. Up to 3 development boards and 1 breadboard may be installed on single enclosure. With hinged design, Board-ganizer lets users work on project with boards located...
Read More »ECIA Presents 2018 North Star Award to Blair Haas
Atlanta, GA - ECIA North Star Award, the association’s highest leadership honor, was awarded to Blair Haas of Bud Industries. The Award was presented at the ECIA Executive Conference by Jeff Thomson, ECIA Board Chair and was highlighted with several anecdotes from Blair's peers. For millennia, the North Star provided the navigational basis to those who sought to explore our world and to...
Read More »
Plastic Enclosures provide impact resistance.
Offered in 15 sizes from 2.56 x 1.97 x 2.17 in. to 22.05 x 11.02 x 5.12 in., PTS Series is made of impact-resistant gray polycarbonate reinforced with 10% fiberglass. IP67 rating combined with continuous foam gasket provides solution for housing sensitive equipment in hazardous, dusty, and washdown environments, as well as wet outdoor locations. Available with optional clear plastic cover,...
Read More »
Die-Cast Aluminum Boxes feature IP68 rating.
Combining corrosion-resistant die-cast aluminum construction with continuous silicon gasket, AN-A Series can house sensitive equipment in hazardous, dusty, and washdown factory environments, as well as in wet outdoor locations. Enclosures are available in 24 sizes ranging from 3.54 x 1.42 x 1.18 in. to 10.24 x 6.30 x 3.56 in., suited for machine controls, security, lighting, instrument cases,...
Read More »Explosionproof Enclosures provide safety for designs and workers.
Made of die-cast aluminum and sealed with continuous silicon rubber gasket, ATX Series is rated for such explosive atmospheres as grain dust and conductive dust (Zones 21, 22) and certified to ATEX II 2 G Ex e IIC Gb and ATEX II 2 D Ex tb IIIC Db. Aluminum body is powder coated, and captive screws in cover are stainless steel. Rated for -50 to +135-
Read More »
PCB Enclosures feature IP66 rating.
Made of anodized aluminum extrusion- with grooves for heat dissipation, EXN Series is available with polycarbonate plastic or powder-coated die-cast aluminum endcap covers that can be removed to slide in printed circuit board. Exterior has built-in 0.5 mm recessed area on which product label can be affixed and/or printed on directly. Available in 17- sizes ranging from 2.7 x 1.39 x 1.93 in. to...
Read More »
IP66 Aluminum Enclosure suits DIN rail applications.
Used independently or mounted on- 35 mm DIN rail, IP66-rated DMX Series is made of extruded aluminum and features polycarbonate plastic endcaps. Latter have UL94-V0 flammability rating and are sealed with EPDM gasket. Integrated slots allow for mounting up to 3 PCBs, which are offered as optional accessories, and available modifications- include holes, slots, or cutouts. There are 6 sizes...
Read More »
Enclosure Vent facilitates heat and moisture dissipation.
Suited for outdoor use, IPV Series PC/PC Wide Opening External Vent allows circulation of air while protecting againt rain water and falling debris. Both 2.91 x 2.91 x 1.1 in. and 3.95 x 3.95 x 1.25 in. models, constructed of gray polycarbonate plastic and 10% fiberglass, withstand exposure to UV light and water in accordance with UL 746C. Also able to be used- indoors,- product features...
Read More »
Plastic Push Button Box offers alternative to steel.
Offering corrosion resistance in washdown, humid, and outdoor environments, PBB Push Button Box carries NEMA 4X/IP67 rating and meets requirements of UL 746C with respect to UV light and water exposure. Construction combines polycarbonate plastic and 10% fiberglass for combined shatter resistance and molding consistency. Latter results in tight tolerances and seal reliability. Gray PBB Push...
Read More »
Molded Plastic Electronics Enclosure carries IP67, NEMA ratings.
Rated to NEMA 1/2/4/4x and IP67, PIP Series- seals out water and dust to protect electronics. Enclosure is made from polycarbonate plastic enhanced with 10% fiberglass, and design ensures precise component fit without rework. Box cover is polycarbonate, and- clear polycarbonate lid is available to facilitate and accelerate inspection. Offered in sizes from 3.15 x 1.18 x 1.37 in. to 10.04 x 4.92...
Read More »
Tablet Enclosures meet IP65 rating for waterproofing and dust.
Featuring clamshell design that fits together with tongue and groove seal, Bud Tablet Enclosures provide protection for electronics used in industrial automation and control as well as other mission-critical applications that might involve harsh environmental conditions. Sizes range from 5.5 x 3.9 x 1.2 in. to 12.7 x 9.1 x 1.2 in., and high-impact ABS plastic construction is flame retardant to...
Read More »