Norcross Corporation

Viscosity Sensor features removable wetted parts.
Sensors, Monitors & Transducers

Viscosity Sensor features removable wetted parts.

Along with one-bolt mounting mechanism, MXBOC Viscosity Sensor includes all stainless steel wetted parts that can be removed for cleaning and sterilization without having to disturb air or electrical connections. Suitable for water- and solvent-based applications with 7-26 in. deep tanks, it uses piston time-of-fall method to measure viscosities from 0.1-100,000 Cps. CE and ATEX compliant unit...

Read More »
Sensors, Monitors & Transducers

Viscosity Test Cup features internal timing pins.

Designed to measure laminar flow, efflux test cup is suited for use with hot fluids. Cup enables user to dip device into any fluid up to 50,000 cps and measure time it takes for fluid to drain from pin-to-pin. It is available with several different hole sizes to correspond with various viscosity ranges. Manufactured with brass and stainless steel, cup includes brass chain to permit measurements...

Read More »
Viscosity and pH Controller features RS485 communications.
Agricultural & Farming Products

Viscosity and pH Controller features RS485 communications.

Norcross MP2000 Viscosity Controller has 60 settings to accommodate solvent- or water-based products. It provides level, field-selectable on/off, or proportion control as well as password protected programming. Capable of displaying in piston time-of-fall seconds, Zahn or Shell Cup seconds, or centipoises, single-loop controller can be recalibrated while operating. It also features sealed keypad...

Read More »
Laboratory Viscometer accurately tests small samples.
Sensors, Monitors & Transducers

Laboratory Viscometer accurately tests small samples.

Able to distinguish between boiling and ambient water, LabPak(TM) Viscometer utilizes piston to measure time-of-fall up to 20 sec, with accuracy to within 0.1 sec. Bench top unit can measure changes in viscosity as small as 0.02 cps, depending upon water- or solvent-based liquids being measured. Consisting of all stainless steel wetted parts and open rod construction, viscometer includes...

Read More »
Viscosity Sensor operates under pressure and vacuum.
Sensors, Monitors & Transducers

Viscosity Sensor operates under pressure and vacuum.

Featuring 316 stainless steel wetted parts, M10 uses piston time-of-fall method to measure viscosities from 0.1-100,000 cps. It operates from vacuum to 100 psi and has 2 in. 150 lb ASA mounting flange. When used in conjunction with PLC, sensor can be used for automatic sampling and process control. Product is designed for end-point polymerization in pressurized or vacuum vessels with suspensions...

Read More »
Software monitors and controls viscosity sensors.

Software monitors and controls viscosity sensors.

Norcross Invisible Controller operates with any PLC that has touch-screen interface, and controls up to 10 stations using company's viscosity sensors. Eliminating need for multiple controllers, it provides real-time trend plots for each station, data logging up to 7 days, and permits set-point and other viscosity parameter adjustments on-the-fly. Custom installed and fully integrated into user's...

Read More »
In-Line Sensor monitors pH of liquid chemicals.
Sensors, Monitors & Transducers

In-Line Sensor monitors pH of liquid chemicals.

Installed directly in fluid line, In-Line pH Sensor incorporates transmitter, which converts mV signal to 4-20 mA for transmission to controller. Featuring flat tip probe with glass insert, sensor has integral reservoir, which traps fluid to keep probe tip wet during job changes and to prevent drying out. Applications include liquid chemical processes such as water-based printing inks, food...

Read More »
Viscosity Sensor features removable wetted parts.
Sensors, Monitors & Transducers

Viscosity Sensor features removable wetted parts.

Along with one-bolt mounting mechanism, MXBOC Viscosity Sensor includes all stainless steel wetted parts that can be removed for cleaning and sterilization without having to disturb air or electrical connections. Suitable for water- and solvent-based applications with 7-26 in. deep tanks, it uses piston time-of-fall method to measure viscosities from 0.1-100,000 Cps. CE and ATEX compliant unit...

Read More »
Sensors, Monitors & Transducers

Viscosity Test Cup features internal timing pins.

Designed to measure laminar flow, efflux test cup is suited for use with hot fluids. Cup enables user to dip device into any fluid up to 50,000 cps and measure time it takes for fluid to drain from pin-to-pin. It is available with several different hole sizes to correspond with various viscosity ranges. Manufactured with brass and stainless steel, cup includes brass chain to permit measurements...

Read More »
Viscosity and pH Controller features RS485 communications.
Agricultural & Farming Products

Viscosity and pH Controller features RS485 communications.

Norcross MP2000 Viscosity Controller has 60 settings to accommodate solvent- or water-based products. It provides level, field-selectable on/off, or proportion control as well as password protected programming. Capable of displaying in piston time-of-fall seconds, Zahn or Shell Cup seconds, or centipoises, single-loop controller can be recalibrated while operating. It also features sealed keypad...

Read More »
Laboratory Viscometer accurately tests small samples.
Sensors, Monitors & Transducers

Laboratory Viscometer accurately tests small samples.

Able to distinguish between boiling and ambient water, LabPak(TM) Viscometer utilizes piston to measure time-of-fall up to 20 sec, with accuracy to within 0.1 sec. Bench top unit can measure changes in viscosity as small as 0.02 cps, depending upon water- or solvent-based liquids being measured. Consisting of all stainless steel wetted parts and open rod construction, viscometer includes...

Read More »
Viscosity Sensor operates under pressure and vacuum.
Sensors, Monitors & Transducers

Viscosity Sensor operates under pressure and vacuum.

Featuring 316 stainless steel wetted parts, M10 uses piston time-of-fall method to measure viscosities from 0.1-100,000 cps. It operates from vacuum to 100 psi and has 2 in. 150 lb ASA mounting flange. When used in conjunction with PLC, sensor can be used for automatic sampling and process control. Product is designed for end-point polymerization in pressurized or vacuum vessels with suspensions...

Read More »
Software monitors and controls viscosity sensors.

Software monitors and controls viscosity sensors.

Norcross Invisible Controller operates with any PLC that has touch-screen interface, and controls up to 10 stations using company's viscosity sensors. Eliminating need for multiple controllers, it provides real-time trend plots for each station, data logging up to 7 days, and permits set-point and other viscosity parameter adjustments on-the-fly. Custom installed and fully integrated into user's...

Read More »
In-Line Sensor monitors pH of liquid chemicals.
Sensors, Monitors & Transducers

In-Line Sensor monitors pH of liquid chemicals.

Installed directly in fluid line, In-Line pH Sensor incorporates transmitter, which converts mV signal to 4-20 mA for transmission to controller. Featuring flat tip probe with glass insert, sensor has integral reservoir, which traps fluid to keep probe tip wet during job changes and to prevent drying out. Applications include liquid chemical processes such as water-based printing inks, food...

Read More »

All Topics