Kinetic Systems, Inc.
Boston, MA 02131
Share:
Dual Stiffness Isolation Mount suits moving load applications.
Offering alternative to active vibration isolation systems, Vibralevel DSM provides both active damping and vibration isolation. Unit eliminates platform tilt by activating stiff mode when load undergoes aggressive move.Â- On signal from machine controller, mount transitions from softer vibration isolation system to stiffer support platform within 500 ms. When move is complete,...
Read More »
Optical Table Isolator uses negative-stiffness technology.
Offered with up to 4 x 8 ft table and gross load capacities to 2,000 lb, MK52 optical table isolation support system may be used where external vibrations adversely affect operation of sensitive equipment. Horizontal isolation is provided by beam columns connected in series with vertical-motion isolator. When adjusted to Â-½ Hz natural frequency, system achieves 93% isolation efficiency at 2...
Read More »
Vibration Isolation Stands have internal pendulum design.
Designed to support KSI breadboards and optical tables, 500AP Series includes trifilar and quadfilar leg stands that respectively support 500-2,000 lb and 250-1,000 lb loads. Products are available individually as modular mounts or as leg stands with braces and casters. Class 100 cleanroom series offers natural frequencies of 1.25 Hz along horizontal axis and 1.50 Hz along vertical and can...
Read More »
Mobile Darkbox Enclosures facilitate optical work.
Suitable for production, testing, or research in optics field, Mobile Darkbox Enclosures block all ambient light and can be produced to customer-specific requirements. Units feature sliding or fixed panels on all 4 sides, and can be large enough to incorporate optical tables, breadboards, or workstations. Offered with multiple tiers of shelving, boxes are available with heating and air...
Read More »
Mobile Cleanrooms enable dust-free assembly and testing.
Approximately 8 ft high with 3 x 6, 4 x 8, or 8 x 8 ft footprint, Mobile Environmental Enclosures are equipped with cleanroom curtains on all 4 sides and multi-speed blowers on roof to maintain positive, downward, pressurized airflow, cleaned using HEPA filters. Inside can be configured for workstation or optical table with electrical outlets, lighting, and computer network connections. Sides are...
Read More »
Vibration Isolation System is designed for portability.
Weighing 40 lb, ELpF (Ergonomic Low-Profile-Format) benchtop system provides vibration isolation for sensitive devices. Self-contained solution uses 16 x 19 in. tabletop, has 3 in. profile, and supports loads up to 100 or 300 lb. Designed for use in laboratories and Class 100 cleanrooms, self-leveling and active-air isolation give platform 1.75 Hz (vertical) and 2.0 Hz (horizontal) natural...
Read More »
Workstation minimizes vibration for sensitive equipment.
Compact, ergonomic 2800 Series LLHP Vibration-Isolation Workstation meets vibration isolation requirements of equipment in 100 lb range, 200 lb max. It provides automatic leveling and 1.1 Hz frequencies along horizontal axis with isolation efficiency of 97% at 10 Hz and above, and 1.4 Hz along vertical axis, with 96% efficiency. Trifilar pendulum mounts and Active-Air suspension optimize...
Read More »
Vibration Isolation Workstation has 650 lb load capacity.
Featuring Minus K® stiff spring and negative-stiffness mechanism, Model MK26 achieves low net vertical stiffness while supporting static loads. Adjusted to Â-½ Hz natural frequency, ergonomic workstation achieves 93% isolation efficiency at 2 Hz, 99% at 5 Hz, and 99.7% at 10 Hz. Class 100 cleanroom compatible with optional Class 10 compatibility, unit is available with 30 x 36 and 36 x...
Read More »
Vibration Surveys assess sensitive equipment needs.
Conducted by Kinetic Systems engineers, on-site surveys ascertain potentially damaging vibration amplitudes and frequencies in new buildings or existing facilities to determine whether or not vibration control is required. Tools measure vertical and horizontal vibrations over required frequency range and average data over time. Further analysis takes into account weights, footprints, centers of...
Read More »
Vibration-Damping Breadboards suit OEM applications.
Available in 4 standard configurations, breadboards provide flat, stable surface for mounting or assembling lasers/small optical systems, prototyping, and precise inspections. Each configuration features natural frequency, nominal broadband damping and flatness of ±0.004 in. over 24 x 24 in. area. Depending on series, nonmagnetic and ferromagnetic products feature extruded aluminum or...
Read More »
Dual Stiffness Isolation Mount suits moving load applications.
Offering alternative to active vibration isolation systems, Vibralevel DSM provides both active damping and vibration isolation. Unit eliminates platform tilt by activating stiff mode when load undergoes aggressive move.Â- On signal from machine controller, mount transitions from softer vibration isolation system to stiffer support platform within 500 ms. When move is complete,...
Read More »
Optical Table Isolator uses negative-stiffness technology.
Offered with up to 4 x 8 ft table and gross load capacities to 2,000 lb, MK52 optical table isolation support system may be used where external vibrations adversely affect operation of sensitive equipment. Horizontal isolation is provided by beam columns connected in series with vertical-motion isolator. When adjusted to Â-½ Hz natural frequency, system achieves 93% isolation efficiency at 2...
Read More »
Vibration Isolation Stands have internal pendulum design.
Designed to support KSI breadboards and optical tables, 500AP Series includes trifilar and quadfilar leg stands that respectively support 500-2,000 lb and 250-1,000 lb loads. Products are available individually as modular mounts or as leg stands with braces and casters. Class 100 cleanroom series offers natural frequencies of 1.25 Hz along horizontal axis and 1.50 Hz along vertical and can...
Read More »
Mobile Darkbox Enclosures facilitate optical work.
Suitable for production, testing, or research in optics field, Mobile Darkbox Enclosures block all ambient light and can be produced to customer-specific requirements. Units feature sliding or fixed panels on all 4 sides, and can be large enough to incorporate optical tables, breadboards, or workstations. Offered with multiple tiers of shelving, boxes are available with heating and air...
Read More »
Mobile Cleanrooms enable dust-free assembly and testing.
Approximately 8 ft high with 3 x 6, 4 x 8, or 8 x 8 ft footprint, Mobile Environmental Enclosures are equipped with cleanroom curtains on all 4 sides and multi-speed blowers on roof to maintain positive, downward, pressurized airflow, cleaned using HEPA filters. Inside can be configured for workstation or optical table with electrical outlets, lighting, and computer network connections. Sides are...
Read More »
Vibration Isolation System is designed for portability.
Weighing 40 lb, ELpF (Ergonomic Low-Profile-Format) benchtop system provides vibration isolation for sensitive devices. Self-contained solution uses 16 x 19 in. tabletop, has 3 in. profile, and supports loads up to 100 or 300 lb. Designed for use in laboratories and Class 100 cleanrooms, self-leveling and active-air isolation give platform 1.75 Hz (vertical) and 2.0 Hz (horizontal) natural...
Read More »
Workstation minimizes vibration for sensitive equipment.
Compact, ergonomic 2800 Series LLHP Vibration-Isolation Workstation meets vibration isolation requirements of equipment in 100 lb range, 200 lb max. It provides automatic leveling and 1.1 Hz frequencies along horizontal axis with isolation efficiency of 97% at 10 Hz and above, and 1.4 Hz along vertical axis, with 96% efficiency. Trifilar pendulum mounts and Active-Air suspension optimize...
Read More »
Vibration Isolation Workstation has 650 lb load capacity.
Featuring Minus K® stiff spring and negative-stiffness mechanism, Model MK26 achieves low net vertical stiffness while supporting static loads. Adjusted to Â-½ Hz natural frequency, ergonomic workstation achieves 93% isolation efficiency at 2 Hz, 99% at 5 Hz, and 99.7% at 10 Hz. Class 100 cleanroom compatible with optional Class 10 compatibility, unit is available with 30 x 36 and 36 x...
Read More »
Vibration Surveys assess sensitive equipment needs.
Conducted by Kinetic Systems engineers, on-site surveys ascertain potentially damaging vibration amplitudes and frequencies in new buildings or existing facilities to determine whether or not vibration control is required. Tools measure vertical and horizontal vibrations over required frequency range and average data over time. Further analysis takes into account weights, footprints, centers of...
Read More »
Vibration-Damping Breadboards suit OEM applications.
Available in 4 standard configurations, breadboards provide flat, stable surface for mounting or assembling lasers/small optical systems, prototyping, and precise inspections. Each configuration features natural frequency, nominal broadband damping and flatness of ±0.004 in. over 24 x 24 in. area. Depending on series, nonmagnetic and ferromagnetic products feature extruded aluminum or...
Read More »
