Norton Abrasives
Worcester, MA 01615
New Winter V-PRIME Wheels Increase Productivity and Reduce Cycle Times
Offers high efficiency and good part quality with less sub-surface damage. User-friendly off-line dressing optimizes grinding wheel preparation. Available in shapes and sizes for resin bonds and in grits including 240, 320 and 400.
Read More »
New AEON Electroplated Grinding Wheels Provide High Grit Retention Levels
Can hold extremely tight profile tolerance of ± 5µm at a maximum wheel diameter of ~24" (600 mm.) and width ~12" (300 mm.), weighing up to 551 lbs (250 kg). Offer single usable abrasive layer design, with diamond or cBN particles mechanically fixed onto the core surface by electrochemical process of nickel deposition. Ideal for high precision applications in the automotive, medical and...
Read More »
New Diamond Single Layer Superabrasive Wheels Produce More Burr-Free Parts and Minimize Secondary Operations
Feature unique bond that reduces friction and allow lower grinding power. Offer heat resistance and lubricity to achieve larger depths-of-cut and cooler cutting. Provide higher stock removal rates and lower cost per part.
Read More »
New FAB Buffing Wheels are Tear Resistant and Waterproof
Incorporates abrasive grains into buffing wheel and consistently results in single digit Ra values ranging from 1 to 5 Ra. Offers silicon carbide abrasive that uniformly dispersed and applied to both sides of the cloth, resulting in more consistent buffing performance. Improves worksite safety and reduces environmental impact of compound disposal.
Read More »
New Rapid Prep XHD Coarse and Medium Discs for Stock Removal and Blending Challenges
Offers a combination of conformable fiber matrix and ceramic grain. XHD Coarse is ideal for surface blending on steels and XHD Medium works well on softer metals/alloys. Provides improved cut control and surface blending over coated flap and fiber discs.
Read More »
New Dual-Worm Grinding Wheels Enable Two Operations in One Grinding Wheel
Feature a design with high-performance vitrified bond section for grinding and a fine-grit resin section for polishing the gear teeth. Reduces harmonics (noise) and improves surface finish of Rz = 1.0mm and Rpk = 0.05mm. Provides high profile accuracy, high form holding and burn-free grinding in worm, profile and bevel applications.
Read More »
New Norton BlazeX F970 Fiber Discs Delivers Better Cut Rate and Longer Disc Life
Enables fast rust removal and improved cleaning and detailing processes for better finishes. Designed to provide cool cuts and to offer longer life due to a non-supersized design. Available in 4-1/2", 5" and 7" fiber discs as well as in 7/8" hole or speed-change attachments.
Read More »
Saint-Gobain's New Line of Norton Carbide Burrs Perform Well at Higher Tempratures and Lasts Longer than HSS Tools
Norton Carbide Burrs are ideal for removing the surface stock and weld splatter, deburring and chamfering applications with less changeovers. It features high stock removal and smaller, granular chip-break is achieved on hard-to-grind workpieces. The tool geometries are ideal for stainless steel, steel, cast steel and composites applications.
Read More »
New Norton Quantum3 Rightcut Cut-Off Wheels for Fast Cutting & Operator Comfort
The new Norton Quantum3 cut-off wheels from Saint Gobain designed for the operator features a rounded proprietary grain for faster cutting and less vibration. The products are available in four Type 01/41 and three Type 27/42 cutting application SKU’s.
Read More »
New Vitron7 cBN Wheels from Norton are Designed for Automotive and Bearing Industry Applications
The Vitron7 cBN Wheels are offered with high-precision vitrified bond that is designed for external grinding of cam and crankshafts applications. The units increase grinding productivity and are suitable for applications that require high surface quality and reduced cycle times. The wheel’s cBN particles are uniformly dispersed throughout the bond matrix for an increase grinding efficiency.
Read More »
New Winter V-PRIME Wheels Increase Productivity and Reduce Cycle Times
Offers high efficiency and good part quality with less sub-surface damage. User-friendly off-line dressing optimizes grinding wheel preparation. Available in shapes and sizes for resin bonds and in grits including 240, 320 and 400.
Read More »
New AEON Electroplated Grinding Wheels Provide High Grit Retention Levels
Can hold extremely tight profile tolerance of ± 5µm at a maximum wheel diameter of ~24" (600 mm.) and width ~12" (300 mm.), weighing up to 551 lbs (250 kg). Offer single usable abrasive layer design, with diamond or cBN particles mechanically fixed onto the core surface by electrochemical process of nickel deposition. Ideal for high precision applications in the automotive, medical and...
Read More »
New Diamond Single Layer Superabrasive Wheels Produce More Burr-Free Parts and Minimize Secondary Operations
Feature unique bond that reduces friction and allow lower grinding power. Offer heat resistance and lubricity to achieve larger depths-of-cut and cooler cutting. Provide higher stock removal rates and lower cost per part.
Read More »
New FAB Buffing Wheels are Tear Resistant and Waterproof
Incorporates abrasive grains into buffing wheel and consistently results in single digit Ra values ranging from 1 to 5 Ra. Offers silicon carbide abrasive that uniformly dispersed and applied to both sides of the cloth, resulting in more consistent buffing performance. Improves worksite safety and reduces environmental impact of compound disposal.
Read More »
New Rapid Prep XHD Coarse and Medium Discs for Stock Removal and Blending Challenges
Offers a combination of conformable fiber matrix and ceramic grain. XHD Coarse is ideal for surface blending on steels and XHD Medium works well on softer metals/alloys. Provides improved cut control and surface blending over coated flap and fiber discs.
Read More »
New Dual-Worm Grinding Wheels Enable Two Operations in One Grinding Wheel
Feature a design with high-performance vitrified bond section for grinding and a fine-grit resin section for polishing the gear teeth. Reduces harmonics (noise) and improves surface finish of Rz = 1.0mm and Rpk = 0.05mm. Provides high profile accuracy, high form holding and burn-free grinding in worm, profile and bevel applications.
Read More »
New Norton BlazeX F970 Fiber Discs Delivers Better Cut Rate and Longer Disc Life
Enables fast rust removal and improved cleaning and detailing processes for better finishes. Designed to provide cool cuts and to offer longer life due to a non-supersized design. Available in 4-1/2", 5" and 7" fiber discs as well as in 7/8" hole or speed-change attachments.
Read More »
Saint-Gobain's New Line of Norton Carbide Burrs Perform Well at Higher Tempratures and Lasts Longer than HSS Tools
Norton Carbide Burrs are ideal for removing the surface stock and weld splatter, deburring and chamfering applications with less changeovers. It features high stock removal and smaller, granular chip-break is achieved on hard-to-grind workpieces. The tool geometries are ideal for stainless steel, steel, cast steel and composites applications.
Read More »
New Norton Quantum3 Rightcut Cut-Off Wheels for Fast Cutting & Operator Comfort
The new Norton Quantum3 cut-off wheels from Saint Gobain designed for the operator features a rounded proprietary grain for faster cutting and less vibration. The products are available in four Type 01/41 and three Type 27/42 cutting application SKU’s.
Read More »
New Vitron7 cBN Wheels from Norton are Designed for Automotive and Bearing Industry Applications
The Vitron7 cBN Wheels are offered with high-precision vitrified bond that is designed for external grinding of cam and crankshafts applications. The units increase grinding productivity and are suitable for applications that require high surface quality and reduced cycle times. The wheel’s cBN particles are uniformly dispersed throughout the bond matrix for an increase grinding efficiency.
Read More »