HBK Inc.

19 Bartlett St.
Marlborough, MA 01752

Torque Flange has nominal torque ratings to 59 lb-kft.

Amplifier loads transducer data with single key stroke.

Model ML801B multi-channel amplifier module features TEDS identification. Digitally stored data is electronically transferred to amplifier, allowing it to select correct settings and start taking measurements. ML801B permits number of sub-channels to be reduced to 8, 4, or 2 as needed, giving corresponding sampling rates of 2,400 Hz, 4,800 Hz, and 9,600 Hz. All channels are measured synchronously...

Sensors, Monitors & Transducers

Force Transducers can be used as test standards.

The Z30 family delivers selection of measuring ranges including 50, 100, 200, and 300 N plus 1, 2, 5, and 10 KN models. With maximum operating force of 150%, rated output is 2 mV/V, and nominal excitation is 5V. Operating temperature range is -10 to +70Ã-

Architectural & Civil Engineering Products

Strain Gage Interface Card handles 4- and 6-wire circuits.

AP815, for single strain gages, allows connection of quarter bridges in 4-wire circuit, and half and full bridges in 6-wire circuit. With half bridges, card allows active and compensation strain gages to be arranged separately, and corrects voltage loss at connecting line. Five excitation voltages are available, providing measuring range of 8 to 80 mV/V and 0 V listening mode to assess line...

Sensors, Monitors & Transducers

Torque Transducers suit transmission test stands.

Series T10FS torque transducers are based on modified T10F measuring body, and use transverse stress measurement principle. Models offer torque ratings from 369 lb-ft to 7,376 lb-ft and speeds up to 22,000 rpm. They feature signal telemetry, non-contact torque measurement, reproducibility of less than Ã-

Controls & Controllers

Interface Module can send up to 10 messages simultaneously.

Model ML71 CANbus Interface Module searches for messages from selected devices on CAN bus and stores them as if they were measurement data. It correlates CAN messages simultaneously and unambiguously with measurement data. Each of ML71's two electrically isolated CAN interfaces can be assigned one separate database, making it possible to capture signals from two independent CAN buses with one...

Sensors, Monitors & Transducers

Displacement Transducers incorporate electronics.

WA-Electronic series of inductive displacement transducers provide 0 to 10 Vdc output signal via in-line electronics. Models include plunger and spring-loaded probe configurations. All have stainless steel construction and handle temperatures up to 300 deg F, making them able to handle harsh industrial environments and wash-down situations. Eight standard measuring lengths are available, from...

Electronic Components & Devices

Strain-Gage Interface Card handles multiple channels.

AP814 allows 8 strain gage quarter-bridges to be connected in regulated 3-wire circuit so cable resistance effects are fully compensated. All 8 channels operate simultaneously, without scanning or multiplexing. Four excitation voltages are available, providing measuring range of 4-80 mV/V. Gage or bridge factors can be set directly. Measurement-without-Excitation mode allows user to distinguish...

Test & Measurement

Digital Measurement System connects to PCs and laptops.

Spider8 provides signal conditioning and data acquisition. Plug and play system connects to serial, parallel, or USB port. Each channel (up to 8) provides excitation for passive transducers, amplification, filtering, and its own A/D converter. Up to 8 Spider8 units may be cascaded to create 64-channel system that provides up to 9,600 measurements per second from each channel with 16-bit...

Computer Hardware & Peripherals

Measurement System provides up to 9,600 measurements/sec.

Spider8 integrated digital measurement system incorporates signal conditioning, amplification, A/D conversion, filtering, and data acquisition. It connects to PCs or laptops via serial, parallel, or USB ports, and is immediately ready for use. Plug-in modules are available for measurement of strain, force, torque, weight, displacement, pressure, and other parameters using inductive,...