Master Fluid Solutions
Perrysburg, OH 43551
New TRIM MicroSol 455 is Optimized for Machining and Metalworking Applications
Master Fluid Solutions’ TRIM® MicroSol® 455 is a low-foam semisynthetic, microemulsion coolant. It is designed to work best with high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. The coolant prevents leaching of elemental iron while eliminating clinkering and oxidation of ferrous microfines. The product prevents corrosion on cast iron and eliminates...
Read More »
Boeing Approves TRIM® MicroSol® 590XT for Aerospace Manufacturing
TRIM® MicroSol® 590XT, an advanced technology aerospace semisynthetic microemulsion , has received Boeing process spec number BAC5008 approval for areas 5 and 6, which includes machining titanium alloys. Perrysburg, Ohio, February 28, 2017 - Master Chemical Corporation is pleased to report that TRIM® MicroSol® 590XT, an advanced technology aerospace semisynthetic microemulsion, is qualified...
Read More »Chlorine-Free Emulsion delivers optimized surface finish.
Delivering optimized lubricity, TRIM-® E925 handles difficult machining operations, even in most demanding materials used in aerospace manufacturing, including titanium and aluminum alloys, exotics, stainless, and high tensile-strength steels.- Multi alloy coolant provides stain and corrosion resistance and leaves soft residual film to protect machine tools and chucks. In addition, product...
Read More »Semisynthetic Coolant meets aerospace specifications.
Free of chlorine, triazine, formaldehyde releasers, phenols, boron, DCHA, and secondary amines, TRIM-® MicroSol-® 590XT Microemulsion Coolant protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials. Non-staining, environmentally friendly- product optimizes sump life and tooling;- is low foaming for demanding high-pressure, high volume applications; and...
Read More »TRIM MicroSol 690XT Receives Pratt & Whitney Approval: PMC 9293
Perrysburg, Ohio — Master Chemical Corporation is very pleased to announce that TRIM-® MicroSol-® 690XT has gained the Pratt and Whitney approval PMC 9293 for contact with gas turbine engine parts made from steels, stainless steels, nickel-based alloys, cobalt-based alloys, aluminum, magnesium, titanium, and titanium alloys. MicroSol 690XT is a high-lubricity, low-foam premium semisynthetic...
Read More »Cutting/Lubricating Oil has low-VOC, nonchlorinated formula.
With VOC levels of less than 75 g/L as per- Southern California AQMD Rule 1144, TRIM-® OM 313- clean running straight oil does not contain any active sulfur, is free of chlorine, and does not stain parts. Suitable uses include form-tapping, thread-rolling, and Swiss screw machines. Offering oxidation inhibition for extended life, oil is proven on steel and bearing steel parts and safe for use...
Read More »
Metalworking Fluid uses synthetic ester technology.
Optimized for high-tech ferrous metals including stainless steel and Inconel-®, TRIM-® C380 targets aerospace, medical, and electronics industries. Combination of synthetic ester technology and non-halogenated EP package produces high levels of lubricity at point-of-cut. Low-foam detergents keep process soils from redepositing on machines and parts. Low odor and low mist, C380 contains no...
Read More »
Metal Removal Fluid suits aerospace, medical applications.
Optimized for long-life, lubricity, and low odor, TRIM-® E850 premium emulsion metalworking fluid meets aerospace and medical device manufacturing requirements. It has no animal-based ingredients or chlorinated paraffin, has mild contact properties, and is readily washable. Blend of vegetable-based technology and traditional lubricity additives optimizes surface finish on difficult-to-machine...
Read More »Metalworking Fluid is compatible with wide range of materials.
Designed to perform well in multi-metal, multi-operational job shops, semi-synthetic low-odor TRIM-® SC520 uses EP-additive package to control built-up edge and improve tool life. Wetting and cooling characteristics are appropriate for high-speed milling and turning operations, while degree of lubricity suits down-the-hole operations in aluminum, cast iron, and most steels. Able to control chip...
Read More »
Metalworking Fluid minimizes oil mist and residues.
Offering alternative to chlorinated soluble oils, TRIM-® MicroSol-® 695 non-halogenated semisynthetic metalworking fluid is compatible with wide range of materials, including aluminum, magnesium and copper alloys, cast iron, and many plastics and composites. Product leaves soft fluid film, keeping machine clean and providing corrosion inhibition on all ferrous and non-ferrous metals. MicroSol...
Read More »Master Fluid Solutions Names Jerrold T. Lundquist Executive Chairman of The Board
Leading metalworking fluids manufacturer continues push for global expansion with a series of executive and board appointments. Perrysburg, Ohio, February 2, 2021 – Master Fluid Solutions has appointed Jerrold T. Lundquist as Executive Chairman of the Board. As Operating CEO through 2020, his leadership has been instrumental in navigating the company through the challenges of the COVID-19...
Read More »Master Fluid Solutions®, Committed to Providing The Most Advanced Metalworking Fluid Solutions to The Globe, Announces their New Precision Machining Center
Abstract: Master Fluid Solutions continues its investment in innovation and future development with the creation of their new Precision Machining Center. The center will quicken and significantly improve their product development process as well as enhance their unique customer training methods. Perrysburg, Ohio, February 15, 2019 – Master Fluid Solutions continues its commitment to its...
Read More »
New TRIM MicroSol 455 is Optimized for Machining and Metalworking Applications
Master Fluid Solutions’ TRIM® MicroSol® 455 is a low-foam semisynthetic, microemulsion coolant. It is designed to work best with high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. The coolant prevents leaching of elemental iron while eliminating clinkering and oxidation of ferrous microfines. The product prevents corrosion on cast iron and eliminates...
Read More »Erica Denton is Master Fluid Solutions' Director - Global Supply Chain
Perrysburg, Ohio, June 20, 2018 — Master Fluid Solutions is pleased to announce that Erica A. Denton has joined as Director – Global Supply Chain. In her new role, Denton will provide leadership and focus on the development of a globally integrated supply chain in alignment with Master Fluid Solutions’ global strategy. She will drive strategic initiatives through the complete Supply Chain...
Read More »Master Fluid Solutions™ Appoints Z. Ahmed Tahir as Global Vice President - Strategy and Marketing
Master Fluid Solutions, continues its drive towards sustainably serving customers in high technology industries with the appointment of Z. Ahmed Tahir as its Global VP of Strategy and Marketing. Perrysburg, Ohio, June 4, 2018 – Master Fluid Solutions, a leading manufacturer of metalworking fluid products, continues its investment in senior talent by appointing Z. Ahmed Tahir as its Global Vice...
Read More »Master Fluid Solutions Receives Three New Bombardier Manufacturing Facility Approvals
Abstract summary: Master Fluid Solutions has received three new Bombardier Manufacturing facility approvals for Master Fluid Solutions in the United Kingdom, China, and India. Perrysburg, Ohio, May 24, 2018 – Master Fluid Solutions is pleased to have received three new Bombardier approvals. The Master Fluid Solutions’ manufacturing facilities in the United Kingdom, China, and India are...
Read More »
Boeing Approves TRIM® MicroSol® 590XT for Aerospace Manufacturing
TRIM® MicroSol® 590XT, an advanced technology aerospace semisynthetic microemulsion , has received Boeing process spec number BAC5008 approval for areas 5 and 6, which includes machining titanium alloys. Perrysburg, Ohio, February 28, 2017 - Master Chemical Corporation is pleased to report that TRIM® MicroSol® 590XT, an advanced technology aerospace semisynthetic microemulsion, is qualified...
Read More »Chlorine-Free Emulsion delivers optimized surface finish.
Delivering optimized lubricity, TRIM-® E925 handles difficult machining operations, even in most demanding materials used in aerospace manufacturing, including titanium and aluminum alloys, exotics, stainless, and high tensile-strength steels.- Multi alloy coolant provides stain and corrosion resistance and leaves soft residual film to protect machine tools and chucks. In addition, product...
Read More »Semisynthetic Coolant meets aerospace specifications.
Free of chlorine, triazine, formaldehyde releasers, phenols, boron, DCHA, and secondary amines, TRIM-® MicroSol-® 590XT Microemulsion Coolant protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials. Non-staining, environmentally friendly- product optimizes sump life and tooling;- is low foaming for demanding high-pressure, high volume applications; and...
Read More »TRIM MicroSol 690XT Receives Pratt & Whitney Approval: PMC 9293
Perrysburg, Ohio — Master Chemical Corporation is very pleased to announce that TRIM-® MicroSol-® 690XT has gained the Pratt and Whitney approval PMC 9293 for contact with gas turbine engine parts made from steels, stainless steels, nickel-based alloys, cobalt-based alloys, aluminum, magnesium, titanium, and titanium alloys. MicroSol 690XT is a high-lubricity, low-foam premium semisynthetic...
Read More »