Beswick Engineering Co., Inc.
Greenland, NH 03840-2442
Pressure Regulators have output pressures from 0-30 psig.
Suited to low pressure regulation such as Ã-½ psig, PRDHF high flow regulator weighs approximately 35 g in brass & stainless steel and about 18.2 g in aluminum. Maximum inlet supply pressure is 500 psig, and both inlet and outlet ports are tapped 10-32 UNF. PRDH8 manifold mount version weighs 52 g in brass and stainless steel, and inlet is 5/16-24 UNF external thread and outlet port is...
Read More »
Diaphragm Pressure Regulators have single-stage design.
Suited for gas and pneumatic pressure regulation, PRDHF non-relieving, high-flow regulator controls output pressures from 0-30 psig. Max inlet supply pressure is 500 psig, and inlet/outlet ports are tapped 10-32 UNF. Also available, manifold-mounted PRDH8 offers features similar to PRDHF but eliminates need for fitting and tubing connections. It features 5/16-24 UNF external thread inlet, and...
Read More »
Quick Disconnects suit space-/weight-conscious applications.
Constructed of stainless steel throughout and weighing 15 g, dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. Internal and external ends are available with 10-32 internal or external threads and include captured o-ring seals for leak-tight connections. Panel mount versions are also available. Products suit applications where space,...
Read More »Miniature Flow Control Valve has pessure-compensated design.
Available in brass with Buna-N (standard) or Viton (optional) seal material, PCFCD-1N1 works with liquids and gasses. Design maintains constant flow rate, adjustable by end-user, regardless of upstream or downstream pressure variations. Pressure regulation is accomplished with low-friction diaphragm mechanism. Weighing 48 g, valve controls flow rates of 0-4.2 gal/hr of water and 0-20 ftÃ-³/hr...
Read More »Beswick Miniature Pressure Gauges and Vacuum Gauges Save Space Several Pressure Ranges
Beswick adds a miniature (0 to 15 psi range) pressure gauge as well as a miniature dual scale (0 to -30 in Hg/ 0 to -75 cm Hg) vacuum gauge to its miniature fluid power product line. These are in addition to 0 to 30 psi, 0 to 60 psi, 0 to 100 psi, 0 to 160 psi and 0 to 200 psi gauges which are currently offered. All are very small. The dial face is just under 1 diameter and the front to back...
Read More »
Adapter Fittings connect metric to imperial threads.
Miniature fittings adapt Imperial/English threaded components to metric threaded components. Products include M3 Internal to M5 External; M3 External to M5 External Nipple Fitting or M3 Internal Extension Fitting; and M3 External Universal Nipple Fitting. Also available are 10-32 External to M3 or M5 Internal; 10-32 Internal to M5 Internal or M6 External; and 10-32 or M5 Internal to M3 External...
Read More »
Miniature Compression Fittings suit 1/4 in. OD tubing.
Featuring 10-32 thread, straight brass Model MCB-14 and 303 SS Model MCB-14-303 measure 53/64 in. long and are designed with Ã-½ in. hexagonal body. Elbow compression fittings include brass Model MCBL-14 and 303 SS Model MCBL-14-303, which are 59/64 in. long and have installed height of 21/32 in. All provide leak-tight seal for tubing connections. Seal options include Buna-N, Fluorocarbon,...
Read More »
Metering Valve includes stops and locking mechanism.
Rated to 200 psig max inlet pressure, Miniature Metering Valve features 10-32 internal threads on both inlet and outlet connections. Mechanical stops allows user to positively position sleeve in either FULL ON or FULL OFF position, while set screw locking mechanism locks sleeve in position once desired flow rate has been achieved. Sleeve and seals are designed to be insensitive to vibration,...
Read More »
Pressure Regulator incorporates 10-32 ports.
Weighing 23 g in aluminum and 50 g in brass and SS, Model PRD3-ANB-C-DEF 2-stage, non-relieving diaphragm pressure regulator controls output pressures from 0-20 psig and is suited for low pressure regulation such as Ã-½ psig. Device features low-friction sensor and valve arrangement for regulation and spring arrangement for handling range of regulated output pressures. With maximum rated...
Read More »
Beswick's PRD2 Pressure Regulator Has Won Product Design & Development Magazine's Engineering Silver Award!
Beswick Engineering's PRD2 pressure regulator has won Product Design & Development magazine's Engineering Silver Award for the best new product in 2005. It was also chosen as one of two runner-ups in Design News magazines 2006 Golden Mousetrap Awards in the Fluid Power category. Beswick PRD2 Ultra Miniature Two-stage Diaphragm Pressure Regulator is an innovative breakthrough for applications in...
Read More »Beswick Product Guide: Learn How to Install and Remove Tubing from Barbed Fittings. Clever Removal Technique
Tubing assembly and removal may seem simple, perhaps even trivial, …until you have to do it yourself or you are responsible for writing assembly instructions. Make your life easier Andrea. Read the Beswick “How to install and remove polyurethane tubing when using barbed style fittings” product guide. The removal technique is particularly clever. Our video tutorial can be viewed here. As...
Read More »How to Select the Proper Pneumatic Fitting & Avoid Problems. The three Common Types and What You Might Not Know
Fortunately, you have choices when you are selecting pneumatic fittings for your product. There are three common fitting types: barbed, push-to-connect, and compression. Each has advantages and disadvantages. How will you select the best type for the long term success of your design? The Beswick Fitting Selection Guide walks you through the selection...
Read More »The Basics of Quick Disconnects - Simplifying the Connections - Beswick and Machine Design Tutorials
Quick disconnects can greatly improve the function and usability of a product by simplifying fluid connections/disconnections. They look uncomplicated from the exterior and, if you are fortunate, your quick disconnect applications are always straight forward and leak-tight. On second thought (you knew there was a catch...didn't you?), should you select a no shut-off, single shut-off, double...
Read More »New Beswick Catalog
Miniature Fittings, Valves, Quick Disconnects, Pressure Regulators, Orifices and More. Beswick Engineering announces the release of our 2014 catalog (#112) containing over 150 new product items. Our expansive line of miniature fittings (compression, barb and push-to connect), valves, quick disconnects, pressure regulators and orifices are ideal for fluid power assemblies requiring durable...
Read More »The Basics of Pressure Regulators - Beswick & Machine Design Tutorials - Unlocking the Mysteries
Pressure regulators look simple from the exterior and, if you are fortunate, your regulator applications are straight forward. Ah, if only life was always that easy! (chuckle) Alas, many regulator applications involve performance nuances that require at least a basic understanding of regulator design and operation to specify the best solution. It is likely that the design, selection, and...
Read More »Beswick Engineering's 2013 Website www.beswick.com is Now Live
The new website includes 3D models, product photos, video links, specifications, specification control drawings, on-line ordering, pricing and a real time web chat option! Beswick Application Engineers are available to help customers by chat-on-line, by e-mail, or by phone. For your convenience, a search window is provided to locate previously purchased products. There is also an add to favorites...
Read More »
Pressure Regulators have output pressures from 0-30 psig.
Suited to low pressure regulation such as Ã-½ psig, PRDHF high flow regulator weighs approximately 35 g in brass & stainless steel and about 18.2 g in aluminum. Maximum inlet supply pressure is 500 psig, and both inlet and outlet ports are tapped 10-32 UNF. PRDH8 manifold mount version weighs 52 g in brass and stainless steel, and inlet is 5/16-24 UNF external thread and outlet port is...
Read More »
Diaphragm Pressure Regulators have single-stage design.
Suited for gas and pneumatic pressure regulation, PRDHF non-relieving, high-flow regulator controls output pressures from 0-30 psig. Max inlet supply pressure is 500 psig, and inlet/outlet ports are tapped 10-32 UNF. Also available, manifold-mounted PRDH8 offers features similar to PRDHF but eliminates need for fitting and tubing connections. It features 5/16-24 UNF external thread inlet, and...
Read More »New 2009-2010 Catalog of Miniature Valves, Fittings, Quick Disconnects, Orifices, Pressure Regulators, and More
Beswick Engineering announces the release of a new 2009-2010 catalog with over 200 new products. These new products are highlighted for easy identification. Catalog #1008 describes Beswick's expanding line of miniature valves, fittings, cylinders, tubing, pressure regulators, orifices, quick disconnects, and other fluid power devices. Particularly noteworthy is the new Push-to-Connect fittings...
Read More »
Quick Disconnects suit space-/weight-conscious applications.
Constructed of stainless steel throughout and weighing 15 g, dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. Internal and external ends are available with 10-32 internal or external threads and include captured o-ring seals for leak-tight connections. Panel mount versions are also available. Products suit applications where space,...
Read More »