Beswick Engineering Co., Inc.
Greenland, NH 03840-2442
Quick Disconnect Assembly provides leak-tight connection.
Weighing 3.4 g, ultra-miniature M3 threaded quick disconnect assembly is comprised of brass internal end and stainless steel external end. Internal end is 16.7 mm long, has 6 mm hexagonal body, automatic shut-off valve, and M3 internal thread, while external end is 11 mm long, has 5 mm hexagonal body, captured O-ring seal, and M3 external thread. Applications include medical and dental,...
Read More »Miniature Fittings provide leak-tight sealing.
With installed height of Ã-½ in., stainless steel Push-Connect Fittings feature captured O-ring seal design and 10-32 thread for use in tight areas. Designed to fit Ã-¼ in. tubing, units are available in in-line configuration as well as elbow, tee, and automatic shut-off versions. They are suited for corrosive environments and applications requiring clean components such as medical and...
Read More »Miniature Air Cylinder has long-life design.
Beswick 1 in. bore cylinders are made from brass or stainless steel with clevis style tail. Long-life linear actuator has piston rod supported with 2 composite bushings: one in nose, and other in tail assembly. Separated bushings adequately support couples induced by side loads and/or stress reversals. Rebuildable products feature dynamic lip seals with U-shaped cross section and do not require...
Read More »
Rotary Selector Valves are offered with 2-6 ports.
Able to be used as quiet replacement for solenoid valves, selector valve No. 6,725,881 allows single input to be switched between 2-6 output ports in standard configuration. Non-selected ports are vented to atmosphere. Optional configuration, with built-in check valves and 2-6 input ports, can be switched to single output port. Non-selected ports are sealed to prevent leakage. Both are available...
Read More »Vacuum Gauge has space-saving, miniature design.
With 7/8 in. dial diameter and depth of 1 7/64 in., Miniature Vacuum Gauge features dual scale for indicating vacuum from 0 to -30 in. Hg. Brass-geared movement contributes to accuracy specification of 3-2-3%, and dual threads allow choice of fitting connections: external 1/8-27 NPT center back brass external connection and 10-32 UNF center back internal connection. Applications include hydrogen...
Read More »
Needle Valve has M3 threaded inlet and hose barb outlet.
Weighing 2.26 g with installed height of 10.4 mm, Micro Needle Valve controls flows from 0-1 scfm at 50 psig. Metal to metal seal provides positive shut-off to 25 in. Hg. Adjusted flow remains stable even during temperature fluctuations as needle and valve seat are both stainless steel. Valve body swivels 360-° to facilitate installation and orientation. Applications include hydrogen fuel cells,...
Read More »
Threaded Compression Fittings fit -¼ in. OD tubing.
Offered in straight and elbow configurations, 10-32 threaded compression fittings incorporate O-ring seals in variety of elastomers to provide leak-free installation. Designed with Ã-½ in. hexagonal body, straight compression fittings MCB-14 (brass) and MCB-14-303 (303 SS) are 53/64 in. long. Elbow compression fittings MCBL-14 (brass) and MCBL-14-303 (303 SS) are 59/64 in. long and have...
Read More »
Pressure Regulator suits space-critical applications.
Measuring 18 mm in diameter, single-stage diaphragm Model PRDB-18MM-A-B-C is offered with 2 inlet and 2 outlet ports, allowing inlet and outlet lines to be connected in 4 different configurations. Regulator controls output pressures from 0-20 psig and is suited for low pressure regulation, even below 1 psig. Maximum rated inlet pressure is 300 psig. Four M3 tapped ports can be plugged with M3...
Read More »
Diaphragm Vacuum Regulator has ultra-miniature design.
With body height of 35/64 in., single-stage VRD-ANB-CD features design that permits in-line mounting without need for panel mounting; panel mount thread is optional. Product weighs 30 g in brass and stainless steel and features 10-32 UNF inlet and outlet ports as well as Buna-N seals. Suited for low-vacuum regulation, such as -Ã-½ psig, regulator controls output vacuum from 0 psig to full...
Read More »
Quick Disconnect has 5-line design.
Offered in brass and stainless steel, 5-line miniature quick disconnect features 2 active releasing sleeves located at each end of assembly. Each of 5 lines are mounted along axis according to in-line arrangement, permitting rapid connecting and disconnecting of lines. Variations include snap type, screw type, single line, single shut-off, double shut-off, threaded and barbed connections, and...
Read More »