Analog Devices, Inc.

Controls & Controllers

DC-DC Switching Controller features voltage tracking.

Intended for point-of-load applications, Model ADP1853 can be configured as voltage-mode controller with input feed-forward or as current-mode controller, depending on application and customer preference. Step-down controller has clock-out and synchronization input to ensure 180° phase-shifted synchronization, eliminating beat frequencies and minimizing system input capacitance when...

Read More »
DAQ System-on-Chip consumes 1 mA in full operation.
Computer Hardware & Peripherals

DAQ System-on-Chip consumes 1 mA in full operation.

Designed for direct interfacing to external 4-20 mA loop-powered sensors in industrial process control, Model ADuCM360 incorporates dual, multi-channel, 24-bit sigma-delta A/D converters; 32-bit ARM Cortex(TM) M3 MCU that enables advanced diagnostics at sensor node; and flash/EE memory. Up to 12 programmable sensor excitation current sources from 10 Â-µA to 1 mA can be used. Available in...

Read More »
Electrical Equipment & Systems

Quad 16-Bit ADC combines 125 MSPS sample rate, low power.

Designed for medical imaging and communications applications, AD9653 comes in non-magnetic, 7 x 7 mm, 48-pin LFCSP and can be used safely within magnetic field of MRI system. This Pb-free, 4-channel ADC has 650 MHz full power analog bandwidth and serial LVDS digital output and consumes 164 mW per channel at 125 MSPS with scalable power option. Respective SNR values with VREF of 1.0 and 1.3 V are...

Read More »
Controls & Controllers

Voltage References feature low frequency noise of 0.5 ppm.

With input voltage of 3-15 V, ADR45xx Series features max temperature coefficient of 2 ppm/°C over full operating temperature of -40 to +125°C and typical long-term drift of 25 ppm/1 khr. Output current is +10 mA source/-10 mA sink. Housed in SOIC-8 package with quiescent current of 950 Â-µA max and dropout voltage of 300 mV at 2 mA, devices are suited for precision applications...

Read More »
Electrical Equipment & Systems

DAC Converters deliver max performance from small package.

Intended for instrumentation and communications applications, AD568xR nanoDAC+(TM) series comes in 16-lead SMT LFCSP or leaded TSSOP and includes quad DACs with 16-, 14-, or 12-bit resolution; on-chip or external reference; and SPI or IÂ-²C control interface. Model AD5686R, with relative accuracy of ±2 LSB max at 16-bits, suits open-loop applications. Along with on-chip 2.5 V, 2...

Read More »
Controls & Controllers

DC-to-DC Regulators feature ultra-low quiescent current.

With input range of 3.2-15 V, Models ADP2370/71 deliver 800 mA output current with greater than 93% conversion efficiency. Devices offer adjustable output voltage from 0.8 V to input voltage, as well as fixed output options. Quiescent current is less than 14 Â-µA in Power Saving Mode. Model ADP2371, otherwise identical to ADP2370, also offers quick output discharge feature. Housed in 3 x 3...

Read More »
Communication Systems & Equipment

RF Driver Amplifier IC features dynamically adjustable bias.

Operating over temperature range of -40 to +105°C, Â-½ Watt Model ADL5324 can be biased from 3.3-5 V, enabling RF designer to adjust power consumption to required system performance without need for bias resistor. Device features low power consumption of 62 mA on 3.3 V and up to 133 mA on 5 V. Available in SOT-89 package, amplifier operates over frequency range of 400-4,000 MHz with...

Read More »
Controls & Controllers

Digital Power Controller targets isolated power supplies.

Intended for high-efficiency AC/DC and isolated DC/DC power supply systems, ADP1046 has 7 PWM logic outputs that can be programmed using GUI with IÂ-²C interface. Adaptive dead-time control increases efficiency across entire load range, while current share and OR-ing control accommodate use in parallel and redundant systems. Other features include voltage feed-forward for accelerated line...

Read More »
Agricultural & Farming Products

New Wireless Communication Devices Enabled by Analog Devices' iCoupler® Digital Isolator Technology Remotely Monitor, Manage, and Control Multiple Medical Devices

New EDS-MD 8PS(TM) and EDS-MD 16PS(TM) from Lantronix® use ADI's patented iCoupler® Digital Isolator Technology NORWOOD, Mass. - Analog Devices, Inc. (ADI) today announced that Lantronix, Inc. has selected ADI's iCoupler® digital isolator technology to enable its new family of wireless communication network servers. The EDS-MD family of multiport medical device servers...

Read More »
Communication Systems & Equipment

New Analog Devices Design Tool Simplifies RF Design and Speeds Time to Market

o New ADIsimRF Version 1.6 adds support of 29 new RF ICs and data converters as well as various functional enhancements. NORWOOD, Mass.- Analog Devices, Inc. (ADI) today announced the release of a new version of its popular ADIsimRF(TM) design tool. ADI's ADIsimRF design tool is the software accompaniment to ADI's complete portfolio of RF-to-digital functional blocks, allowing engineers to model...

Read More »

All Topics