BEPeterson, Inc.
Avon Industrial Park
Avon, MA 02322-1121
Vacuum Vessel System - Spin Vacuum Chamber Components
BEPeterson has recently completed components used in a Vacuum Vessel System.- This is a spin vacuum chamber used to test parts at high speeds in a vacuum. The top lid needs to seal with the spin chamber assembly and the top lid is attached to the lift arm and rides up and down on the lift column. The parts supplied by BEPeterson consisted of: 1) Vacuum Chamber 2) Chamber Lid 3)...
Read More »ASME Pressure Vessel - Test Vessel
BEPeterson has recently completed an ASME Pressure Vessel to be used as a Test Vessel for navel underwater development applications.- The pressure vessel is 50 ID x 59.25" T/T fabricated in carbon steel. It was designed to 150 psi @ -20/482 degrees. The pressure vessel has six 10" nozzles and twenty four 1" NPT fittings. The pressure vessel is mounted in a horizontal position on...
Read More »Vacuum Vessel System - Spin Vacuum Chamber Components
BEPeterson has recently completed components used in a Vacuum Vessel System.Ã- This is a spin vacuum chamber used to test parts at high speeds in a vacuum. The top lid needs to seal with the spin chamber assembly and the top lid is attached to the lift arm and rides up and down on the lift column.ÃÂ The parts supplied by BEPeterson consisted of: 1) Vacuum ChamberÃÂ 2) Chamber...
Read More »ASME Pressure Vessel - Test Vessel
BEPeterson has recently completed an ASME Pressure Vessel to be used as a Test Vessel for navel underwater development applications.Ã- The pressure vessel is 50 ID x 59.25" T/T fabricated in carbon steel.ÃÂ It was designed to 150 psi @ -20/482 degrees.ÃÂ The pressure vessel has six 10" nozzles and twenty four 1" NPT fittings.ÃÂ The pressure vessel is mounted in a horizontal...
Read More »ASME Pressure Vessel can be used as exhaust condensate tank.
BEPeterson has recently completed an ASME Pressure Vessel to be used as an Exhaust Condensate Tank. The pressure vessel is 36 OD x 90" OAL fabricated in carbon steel. It was designed to 15 psi @ 176 degrees. The pressure vessel has one 24" manway and 8 additional nozzles. The tank will have both exterior and interior linings added per the customers’ requirements. About BEPeterson Since...
Read More »ASME Pressure Vessel can be used as exhaust condensate tank.
BEPeterson has recently completed an ASME Pressure Vessel to be used as an Exhaust Condensate Tank.- The pressure vessel is 36 OD x 90" OAL fabricated in carbon steel. It was designed to 15 psi @ 176 degrees. The pressure vessel has one 24" manway and 8 additional nozzles. The tank will have both exterior and interior linings added per the customers’ requirements. About BEPeterson...
Read More »Pressure Vessel - Holding Tank - Manufactured by BEPeterson
BEPeterson has shipped a 48 OD x 72" 304 L Stainless Steel Pressure Vessel.- This is a horizontal holding tank designed for atmospheric pressure @ 150 degrees. The vessel was welding to carbon steel cradle painted with red oxide primer. BEPeterson fabricates Pressure vessels, both ASME code and non-code pressure vessels and tanks.
Read More »ASME Pressure Vessel - Exhaust Condensate Tank Fabricated by BEPeterson
BEPeterson has recently completed an ASME Pressure Vessel to be used as an Exhaust Condensate Tank.- The pressure vessel is 36 OD x 90" OAL fabricated in carbon steel. It was designed to 15 psi @ 176 degrees. The pressure vessel has one 24" manway and 8 additional nozzles. The tank will have both exterior and interior linings added per the customers requirements.
Read More »Pressure Vessel - Holding Tank - Manufactured by BEPeterson
BEPeterson has shipped a 48 OD x 72" 304 L Stainless Steel Pressure Vessel.Ã- This is a horizontal holding tank designed for atmospheric pressure @ 150 degrees.ÃÂ The vessel was welding to carbon steel cradle painted with red oxide primer. BEPeterson fabricates Pressure vessels, both ASME code and non-code pressure vessels and tanks.
Read More »ASME Pressure Vessel - Exhaust Condensate Tank Fabricated by BEPeterson
BEPeterson has recently completed an ASME Pressure Vessel to be used as an Exhaust Condensate Tank.Ã- The pressure vessel is 36 OD x 90" OAL fabricated in carbon steel.ÃÂ It was designed to 15 psi @ 176 degrees.ÃÂ The pressure vessel has one 24" manway and 8 additional nozzles.ÃÂ The tank will have both exterior and interior linings added per the customers requirements.
Read More »