The L.S. Starrett Company
Athol, MA 01331

New Multi-Sensor Vision System with M3 Software Package from MetLogix
AVR-FOV 0.14X has X-Y-Z travel of 12 x 8 x 8 as well as programmable light output options. Allow metrology users in manufacturing facilities or QC labs to produce accurate, fast and repeatable results. Traditional mouse as well as a touchscreen monitor make user interaction simple and intuitive.
Read More »
New Wireless Data Collection System Features High Bit Rates
DataSure 4.0 features very high-speed connection of less than 50 ms of data travel time and low latency network . Works with gages that have built-in wireless capability, such as W798 calipers, W733.1 micrometers and W2900 indicators. Includes ultra-low latency network that enables high data volumes to be processed without delay, even at full capacity.
Read More »
New Decorated Micrometers Come with No-Glare Satin Chrome Finish
Available in either individual 0-1, 1-2, 2-3, 3-4 in. models, or in 0-4 in. sets in custom wooden cases. Feature .0001 in. graduation, ratchet stop, lock nut, and carbide measuring faces on the anvil and spindle. Offered in either American Pride or Camouflaged themes emblazoned on the frames.
Read More »
New Multi-sensor Vision System Features Granite Base and Bridge Design
AVX550 equipped with dual optical systems and touch-probe capability to measure parts with a diverse range of feature sizes and geometries. Features dual optical systems that work in tandem to measure a broad range of features. Can be equipped with two cameras and lenses to be used sequentially in the same program along with touch probe options.
Read More »
New Electronic Digital Micrometer Offers Long Battery Life
No. 733.1 outside micrometers are available in a 0-1 model, up to 24 and in 0-6 and 0-12 sets of individual micrometers. Includes an IP67 level of protection on sizes 0 - 4 . Withstands the harshest shop elements including coolant, water, chips, dust and dirt while retaining tool integrity.
Read More »
New MetLogix Mx200 Digital Readouts Come with Multiple Language Support
Feature EdgeLogic™ that enable gesture-driven control of start and end measurement commands, minimizing the need to interact with the DRO directly. Offer Change Feature Type button and LCD display with LED capacitive touchscreen. Sealed rubber keypad and durable powder-coated enclosure provide lasting performance in any environment.
Read More »
New Rotary Table Springs Force Tester Provides Pass or Fail Report on Each Spring
Features FMS-1000-L3, a single-column force measurement system optimized for high-volume production and quality control testing. Test multiple springs in a single setup without the need for additional operator input as required when springs are tested one by one. Detailed information on each spring is also available including free length, spring rate and critical load and distance points.
Read More »
New HB400 Benchtop Optical Comparator with Optical Edge Detection
Features a large 16 diameter viewing screen 16 horizontal travel, a 6 Y vertical travel, a 2 focus travel and a 110 lb. workstage load capacity. Available with rugged metal construction with hard-anodized stage tooling plate, LED profile and surface lighting rated to 50,000 hours and touch-screen operation. Comes with single bayonet style lens mounting system that accepts a choice of six fixed...
Read More »
Starrett Introduces Flexible Force Testing Systems Design
The Full Range of Starrett Force Software Solutions are now Interchangeable with Different Starrett Frame Series. Athol, MA U.S.A. (December 17, 2019) – The L.S. Starrett Co., a leading global manufacturer of precision hand tool gages, a broad range of force testing, metrology equipment, and more, has introduced a flexible selection architecture that enables the range of Starrett force and...
Read More »New Hardness Testers with Fully Automated Load and Unload Procedures
Capable of providing high accurate readings. 3824 feature programmable scale conversions, dwell times, statistical capabilities and test counter. 3823 features built-in micro-printer, touch screen control on a high definition LCD display, USB output and are furnished with PC-based software.
Read More »
New Multi-Sensor Vision System with M3 Software Package from MetLogix
AVR-FOV 0.14X has X-Y-Z travel of 12 x 8 x 8 as well as programmable light output options. Allow metrology users in manufacturing facilities or QC labs to produce accurate, fast and repeatable results. Traditional mouse as well as a touchscreen monitor make user interaction simple and intuitive.
Read More »
New Wireless Data Collection System Features High Bit Rates
DataSure 4.0 features very high-speed connection of less than 50 ms of data travel time and low latency network . Works with gages that have built-in wireless capability, such as W798 calipers, W733.1 micrometers and W2900 indicators. Includes ultra-low latency network that enables high data volumes to be processed without delay, even at full capacity.
Read More »
New Decorated Micrometers Come with No-Glare Satin Chrome Finish
Available in either individual 0-1, 1-2, 2-3, 3-4 in. models, or in 0-4 in. sets in custom wooden cases. Feature .0001 in. graduation, ratchet stop, lock nut, and carbide measuring faces on the anvil and spindle. Offered in either American Pride or Camouflaged themes emblazoned on the frames.
Read More »
New Multi-sensor Vision System Features Granite Base and Bridge Design
AVX550 equipped with dual optical systems and touch-probe capability to measure parts with a diverse range of feature sizes and geometries. Features dual optical systems that work in tandem to measure a broad range of features. Can be equipped with two cameras and lenses to be used sequentially in the same program along with touch probe options.
Read More »
New Electronic Digital Micrometer Offers Long Battery Life
No. 733.1 outside micrometers are available in a 0-1 model, up to 24 and in 0-6 and 0-12 sets of individual micrometers. Includes an IP67 level of protection on sizes 0 - 4 . Withstands the harshest shop elements including coolant, water, chips, dust and dirt while retaining tool integrity.
Read More »
New MetLogix Mx200 Digital Readouts Come with Multiple Language Support
Feature EdgeLogic™ that enable gesture-driven control of start and end measurement commands, minimizing the need to interact with the DRO directly. Offer Change Feature Type button and LCD display with LED capacitive touchscreen. Sealed rubber keypad and durable powder-coated enclosure provide lasting performance in any environment.
Read More »
New Rotary Table Springs Force Tester Provides Pass or Fail Report on Each Spring
Features FMS-1000-L3, a single-column force measurement system optimized for high-volume production and quality control testing. Test multiple springs in a single setup without the need for additional operator input as required when springs are tested one by one. Detailed information on each spring is also available including free length, spring rate and critical load and distance points.
Read More »
New HB400 Benchtop Optical Comparator with Optical Edge Detection
Features a large 16 diameter viewing screen 16 horizontal travel, a 6 Y vertical travel, a 2 focus travel and a 110 lb. workstage load capacity. Available with rugged metal construction with hard-anodized stage tooling plate, LED profile and surface lighting rated to 50,000 hours and touch-screen operation. Comes with single bayonet style lens mounting system that accepts a choice of six fixed...
Read More »
Starrett Introduces Flexible Force Testing Systems Design
The Full Range of Starrett Force Software Solutions are now Interchangeable with Different Starrett Frame Series. Athol, MA U.S.A. (December 17, 2019) – The L.S. Starrett Co., a leading global manufacturer of precision hand tool gages, a broad range of force testing, metrology equipment, and more, has introduced a flexible selection architecture that enables the range of Starrett force and...
Read More »Starrett Appoints David Allen As Metrology Systems Vice President
Athol, MA U.S.A. (December 9, 2019) – The L.S. Starrett Company, a leading global manufacturer of precision measuring tools and gages, metrology systems and more, has announced the appointment of Mr. David Allen as Vice President, Starrett Metrology Systems, effective November 18, 2019. In this newly-created role, Mr. Allen will be responsible for the strategy, growth and profitability of the...
Read More »