Coto Corporation
North Kingstown, RI 02852
Share:
Miniature Vertical SIP Relay saves board space.
Housed in 0.270 x 0.150 x 0.385 in. package, 1A Series 9117 Reed Relays incorporate external magnetic shield to minimize interaction of relays when mounted in close proximity to each other. Raised height allows for reduction in width, producing smaller footprint with pins on 0.06 in. pitch grid. Series 9117 is available in 5 V coils with standard external magnetic shield and optional diode.
Read More »Form C SMD Reed Relay has 0.078 in.-² footprint.
Suited for ATE, process instrumentation, and telecommunications applications, 9852 relay features expected life of 100 and 200 million cycles with NC and NO contacts, respectively, at 1 V 10 mA load. RF bandpass (-3 dB) is 4 GHz (NO) or 3 GHz (NC), while isolation and return losses at 1 GHz are -10 and -20 dB, respectively. Offered in gull-wing, J-lead, or axial surface-mount styles, product has...
Read More »
Miniature SIP Relays are suited for ATE applications.
Manufactured with molded thermoset body on integral lead frame design, SIP reed relays incorporate magnetic shielding and hermetically sealed contacts. Models 9012 (10 W) and 9011 (3 W) share .400 x .150 in. footprint and have respective profiles of .400 and .265 in. Model 9117, rated 3 W, measures .270 x .150 x .385 in. Featuring insulation resistance of 1012 ohm min, relays suit various test,...
Read More »
Miniature Reed Relay comes in 5 and 12 V coils.
Measuring .600 x .150 x .350 in., SIP Model 9092 features 2 Form A switching capability. Six-pin layout on 0.1 in. pitch grid provides electrical connections, while external magnetic shield minimizes interaction of relays mounted in close proximity. Featuring molded thermoset body, Model 9092 utilizes 10 W switch technology making it suited for ATE applications as well as test, measurement, and...
Read More »
SIP Reed Relay comes in 5 and 12 V coils.
Series 9104 offers high-voltage switching capability up to 1,000 Vdc/ac peak. In normally-open contact state, dielectric strength is greater than 2,000 Vdc/ac peak. Metal shell minimizes interaction of relays that may be mounted next to one another. High-voltage standoff and switching capability make relay suitable for use in automatic test equipment, instrumentation, and process control...
Read More »
BGA Reed Relay is RF capable.
Series B41 four independent-channel, form-A planar relay requires no slot or hole in PC board for mounting. Unit allows short RF paths in controlled 50 ohm environment to minimize signal attenuation. Each channel has RF insertion loss of greater than 8 GHz. Combination of coaxial and magnetic shielding helps reduce adjacent closed inter-channel RF crosstalk to -40 dB at 1 GHz test signal....
Read More »
Reed Switch features max glass length of 15 mm.
Series RI-90 Changeover Dry Reed Switch is an SPDT type unit with common, NO, and NC contacts. Ruthenium contact layers provide long-life switching at wide variety of loads. Maximum switching current is 400 mA with 125 Vac or 175 Vdc switching voltage. With initial contact resistance of 140 milliohms, switch is suited for applications in automatic test equipment, security, industrial, and...
Read More »
Surface Mount Reed Switches have ultra-miniature design.
Series RI-80SMD SMT Switches offer 5 mm max glass length and wide, flat lead for stability during component placement. Rated at 5 W, units come in 3 different Gull or J lead configurations, which measure just .279 in. Tape and Reel packaging facilitates automated processing.
Read More »
Reed Relays provide leadless designs.
Models B10 and B40, featuring ball-grid-array packaging, offer RF impedance close to 50 ohms. Single channel, Form A Model B10 uses 0.1 in.Ã-² board space and includes 3.3 or 5 V coils. RF insertion loss is >10 GHz. Model B40 features 4 independent form A channels in one quad package requiring 0.215 inÃ-² of board space. Both 3.3V and 5V coils are available and RF insertion loss is >11...
Read More »
Miniature Proximity Sensors are suited for SMD mounting.
Sensors, molded in thermoset plastic, are suited for automated pick-and-place applications. Based on 5 mm switch design, Model CT05 measures 0.252 in. long, is available in Gull or J lead configurations, and carries 5 W rating. Rated at 10 W, Model CT10 is available with G4 lead configuration with wide, flat lead to provide stability during component placement and solderability for surface-mount...
Read More »
Miniature Vertical SIP Relay saves board space.
Housed in 0.270 x 0.150 x 0.385 in. package, 1A Series 9117 Reed Relays incorporate external magnetic shield to minimize interaction of relays when mounted in close proximity to each other. Raised height allows for reduction in width, producing smaller footprint with pins on 0.06 in. pitch grid. Series 9117 is available in 5 V coils with standard external magnetic shield and optional diode.
Read More »Form C SMD Reed Relay has 0.078 in.-² footprint.
Suited for ATE, process instrumentation, and telecommunications applications, 9852 relay features expected life of 100 and 200 million cycles with NC and NO contacts, respectively, at 1 V 10 mA load. RF bandpass (-3 dB) is 4 GHz (NO) or 3 GHz (NC), while isolation and return losses at 1 GHz are -10 and -20 dB, respectively. Offered in gull-wing, J-lead, or axial surface-mount styles, product has...
Read More »
Miniature SIP Relays are suited for ATE applications.
Manufactured with molded thermoset body on integral lead frame design, SIP reed relays incorporate magnetic shielding and hermetically sealed contacts. Models 9012 (10 W) and 9011 (3 W) share .400 x .150 in. footprint and have respective profiles of .400 and .265 in. Model 9117, rated 3 W, measures .270 x .150 x .385 in. Featuring insulation resistance of 1012 ohm min, relays suit various test,...
Read More »
Miniature Reed Relay comes in 5 and 12 V coils.
Measuring .600 x .150 x .350 in., SIP Model 9092 features 2 Form A switching capability. Six-pin layout on 0.1 in. pitch grid provides electrical connections, while external magnetic shield minimizes interaction of relays mounted in close proximity. Featuring molded thermoset body, Model 9092 utilizes 10 W switch technology making it suited for ATE applications as well as test, measurement, and...
Read More »
SIP Reed Relay comes in 5 and 12 V coils.
Series 9104 offers high-voltage switching capability up to 1,000 Vdc/ac peak. In normally-open contact state, dielectric strength is greater than 2,000 Vdc/ac peak. Metal shell minimizes interaction of relays that may be mounted next to one another. High-voltage standoff and switching capability make relay suitable for use in automatic test equipment, instrumentation, and process control...
Read More »
BGA Reed Relay is RF capable.
Series B41 four independent-channel, form-A planar relay requires no slot or hole in PC board for mounting. Unit allows short RF paths in controlled 50 ohm environment to minimize signal attenuation. Each channel has RF insertion loss of greater than 8 GHz. Combination of coaxial and magnetic shielding helps reduce adjacent closed inter-channel RF crosstalk to -40 dB at 1 GHz test signal....
Read More »
Reed Switch features max glass length of 15 mm.
Series RI-90 Changeover Dry Reed Switch is an SPDT type unit with common, NO, and NC contacts. Ruthenium contact layers provide long-life switching at wide variety of loads. Maximum switching current is 400 mA with 125 Vac or 175 Vdc switching voltage. With initial contact resistance of 140 milliohms, switch is suited for applications in automatic test equipment, security, industrial, and...
Read More »
Surface Mount Reed Switches have ultra-miniature design.
Series RI-80SMD SMT Switches offer 5 mm max glass length and wide, flat lead for stability during component placement. Rated at 5 W, units come in 3 different Gull or J lead configurations, which measure just .279 in. Tape and Reel packaging facilitates automated processing.
Read More »
Reed Relays provide leadless designs.
Models B10 and B40, featuring ball-grid-array packaging, offer RF impedance close to 50 ohms. Single channel, Form A Model B10 uses 0.1 in.Ã-² board space and includes 3.3 or 5 V coils. RF insertion loss is >10 GHz. Model B40 features 4 independent form A channels in one quad package requiring 0.215 inÃ-² of board space. Both 3.3V and 5V coils are available and RF insertion loss is >11...
Read More »
Miniature Proximity Sensors are suited for SMD mounting.
Sensors, molded in thermoset plastic, are suited for automated pick-and-place applications. Based on 5 mm switch design, Model CT05 measures 0.252 in. long, is available in Gull or J lead configurations, and carries 5 W rating. Rated at 10 W, Model CT10 is available with G4 lead configuration with wide, flat lead to provide stability during component placement and solderability for surface-mount...
Read More »