Norbar Torque Tools, Inc.
Willoughby, OH 44094-8221
Screwdriver Torque Testers are accurate to -
TruCheck(TM) Screwdriver Testers feature LED display, machined aluminum housings, and Ã-¼ in. male hexagon tool interface. Available models include 0.1-3 Nm range unit with vertical tool input, 1-10 Nm tester with vertical tool input, and 1-25 Nm model with horizontal input and Ã-¼ and 3/8 in. adapters for testing small torque wrenches. Screwdriver testers are workbench-mounted via two M6...
Read More »
Torque Multipliers suit limited access applications.
HandTorque(TM) torque multipliers are available in 1,000 Nm HT-52 and 2,000 Nm HT-72 models. Model HT-52 is fully compatible with manual torque wrenches or torque-controlled angle nut runners. Fasteners with limited access can be tightened with multiplication accuracy of Ã-
Read More »
Torque Tester accommodates any-sized wrench.
Offering 3 transducer inputs, Torque Tool Tester Series 3 operates in all common torque measurement units. Up to 12 target limit values can be set, giving clear visual signal as to whether measured process is within tolerance. Low, High, or Pass signal can also be output via RS-232 to PC or printer. Pictorial display and membrane keypad are provided for selection of operating modes. When operated...
Read More »
Ultrasonic Bolt Meter provides measurement stability.
USM-2 Ultrasonic Bolt Meter with operating software v1.6 provides precise measurement of elongation and load in threaded fasteners from 1 in. to 50 ft long made of any metal material. Field-portable unit features onboard flash memory that stores up to 5 elongation and load measurements for each bolt to verify multiple pass tightening procedures. Integral data recorder stores bolt information and...
Read More »
Ultrasonic Bolt Meter features tension control module.
Model USM-2 offers precise measurement of elongation and load in threaded fasteners. Tension Control Module interrupts incoming air flow to power tool to stop torque or tension, automatically shutting off power-driven tools once bolt has achieved user-defined preload or elongation. Suited for metal fasteners from 1 in. to over 20 ft long, meter includes data recorder that stores bolt information...
Read More »
Pneumatic Torque Wrench features 2 in. dia gearbox.
Pneutorque Model PT52 offers torque capacity of 205 lb-ft with max speed of 125 rpm or 123 lb-ft with max speed of 200 rpm. Basic stall tool employs inlet air pressure to control torque, while electronic shutoff version includes torque transducer, torque display, and internal solenoid valve. Suited for valve and pipe work and maintenance and assembly applications, wrench provides smooth,...
Read More »Norbar is Oxfordshire's Exporter of the Year
Norbar Torque Tools of Banbury, celebrating its 70th Anniversary this year, has triumphed at the Oxfordshire Business Awards 2012 by being voted the county's top exporter. The Carter Jonas Export Award was presented to Norbar by athletics star Kriss Akabusi at the recent Awards Gala Dinner at Oxford Thames Four Pillars Hotel. This Export Award follows on from Norbar's recent recognition as...
Read More »Norbar Scoops Two Major Business Awards
Banbury based Norbar Torque Tools has achieved major recognition in the Cherwell Business Awards for 2012, receiving both the ultimate prize as Business of the Year 2012 and the Staff Care and Training Award for the motivation and support of its employees. Norbar is a family run company and the world's leading specialist in the design, development and production of torque tightening and measuring...
Read More »Norbar India Official Launch Success
Having opened for business at the beginning of the year, Norbar Torque Tools India Pvt Ltd had a successful inauguration of its well-appointed premises in Mumbai on Saturday 14th January, with Managing Director Neill Brodey and Norbar India General Manager Narendra Borse welcoming 60 selected guests for an enjoyable morning event rounded off with lunch. The official opening and ribbon cutting was...
Read More »Norbar Opens up in India
Norbar Torque Tools has announced the launch of its new sales and customer support operation in Mumbai, India, which will be opening its doors for business as from 1st January 2012. This is the latest stage Norbar's long-term strategic development and Norbar India will take its place in a global network of companies based in Australia, China, New Zealand, Singapore and the USA. The General...
Read More »
Screwdriver Torque Testers are accurate to -
TruCheck(TM) Screwdriver Testers feature LED display, machined aluminum housings, and Ã-¼ in. male hexagon tool interface. Available models include 0.1-3 Nm range unit with vertical tool input, 1-10 Nm tester with vertical tool input, and 1-25 Nm model with horizontal input and Ã-¼ and 3/8 in. adapters for testing small torque wrenches. Screwdriver testers are workbench-mounted via two M6...
Read More »UKAS Acknowledges Norbar Expertise
The Norbar Torque Tools calibration laboratory in Banbury, Oxfordshire has achieved an extended level of endorsement from the government recognised United Kingdom Accreditation Service, being awarded UKAS accreditation for performing calibrations to 108,500 N.m of torque under BS7882: 2008. Norbar offers an extraordinary range of independently accredited capabilities that very few laboratories in...
Read More »Disk DVD on Torque Tools, Testers, Transducers and Uses
Willoughby, OH - Norbar Torque Tools, Inc. has released a free, two-disc multimedia DVD concerning its torque products. The first disk is divided into product families for easy navigation. The entire range of Norbar torque wrenches, multipliers, testers and transducers is featured. Each product description includes practical hints and tips for existing and prospective users. The effects of the...
Read More »
Torque Multipliers suit limited access applications.
HandTorque(TM) torque multipliers are available in 1,000 Nm HT-52 and 2,000 Nm HT-72 models. Model HT-52 is fully compatible with manual torque wrenches or torque-controlled angle nut runners. Fasteners with limited access can be tightened with multiplication accuracy of Ã-
Read More »
Torque Tester accommodates any-sized wrench.
Offering 3 transducer inputs, Torque Tool Tester Series 3 operates in all common torque measurement units. Up to 12 target limit values can be set, giving clear visual signal as to whether measured process is within tolerance. Low, High, or Pass signal can also be output via RS-232 to PC or printer. Pictorial display and membrane keypad are provided for selection of operating modes. When operated...
Read More »
Ultrasonic Bolt Meter provides measurement stability.
USM-2 Ultrasonic Bolt Meter with operating software v1.6 provides precise measurement of elongation and load in threaded fasteners from 1 in. to 50 ft long made of any metal material. Field-portable unit features onboard flash memory that stores up to 5 elongation and load measurements for each bolt to verify multiple pass tightening procedures. Integral data recorder stores bolt information and...
Read More »