Munson Machinery Company, Inc.
Utica, NY 13502
New Sanitary Rotary Batch Mixer with Internal Spray Line
Model 700-TH-40-SS available with useable batch capacity of 40 cu.ft. and total capacity of 82 cu.ft. Constructed of stainless steel finished to sanitary standards. Design eliminates the need for an internal shaft with seals contacting material.
Read More »
New De-Clumper Lump Breaker Features Support Base and Infeed Hopper Design
RDC-1530-SS lump breaker is powered by a 5 HP (3.7 kW) motor with self-lubricating chain and sprocket drive. De-lumps bulk materials that are agglomerated or solidified during storage or shipment to their original particle sizes and flowability. #304 or #316 stainless steel constructed units can be finished to food, pharmaceutical or industrial standards.
Read More »Dryer-Dehumidifier-Cooler processes bulk solid materials.
Intended for 3-A and USDA applications as well as applications involving contamination-sensitive materials, Rotary Batch Dryer-Dehumidifier-Cooler features all-stainless contact surfaces, continuous polished welds, and external removable seals. Configurations are available for both direct and indirect drying, dehumidifying, and cooling. Offering usable batch capacity of 20 cu-ft and total...
Read More »
Batch Mixer dries/dehumidifies/cools bulk solid materials.
With all-stainless contact surfaces and suitable for 3-A and USDA applications, Rotary Batch Dryer-Dehumidifier-Cooler uses diagonal, vertical tumbling and spilling motion to optimize particle exposure. This, along with lifters inside drum, minimizes material degradation and promotes process efficiency. Lifters also serve to direct material into discharge spout for 100% evacuation. Ingredients...
Read More »Miniature Rotary Batch Mixer has 5 ft-³/500 lb capacity.
Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...
Read More »
Hammer Mill reduces friable and fibrous materials.
Utilizing centrifugal force, Model 141 reduces materials into uniform particle sizes from 20-300 mesh. Shaft, integral hammer discs, disc pins, and hammers are driven by 75 hp motor at 1,800-4,000 rpm, achieving hammer tip speeds from 8,700-19,500 fpm. Particle size is determined by size of screen perforations. In addition to lower 180Ã-
Read More »
Shredder handles highly abrasive materials.
Maxum 30 employs two 14 in. dia, counter-rotating shafts that operate at 25-35 rpm to grind up to 2 x 2 x 6 ft, 1,600 lb blocks of material into uniform particles from 1/32-1Ã-½ in. as determined by diameter of bed screen perforations. Each of its 2 rotors is configured with staggered array of treated, solid carbide, conical tips that have interference fit into receiver slots for rapid...
Read More »
Rotary Batch Mixers blend heavy, abrasive materials.
Miniature HD Series handles materials with bulk densities up to 80 lb/cu ft. Rotating drum features mixing flights that tumble, turn, and fold material gently while achieving total uniformity in 2-3 minutes, regardless of disparities in bulk densities, particle size, or flow characteristics. Models range in capacity from 0.25-15 cu ft or 2-1,200 lb. They evacuate 100% of batch with no manual...
Read More »
Sanitary Rotary Batch Mixer maintains batch temperatures.
Featuring 20 ftÃ-³ capacity, jacketed Model 700-TH-20-SSJ gently blends batches of ingredients down to 1 ppm with 100% uniformity in less than 3 min while keeping materials heated or cooled. It evacuates 100% of batch and can be sanitized without tools. With material contact surfaces of 304 or 316 stainless steel, 3-A and USDA-compliant unit has rotating drum with external, removable seals...
Read More »
Screen Classifying Cutter controls particle size range.
Model SCC-30 Cutter cuts hard, soft and fibrous materials into controlled particle sizes. Helical rotor with cutter blades attached to array of interconnected parallelograms continuously shears oversize materials against twin, stationary bed knives. Suited for coarse grinding of materials into particles ranging from granules down to 20-30 mesh, cutter has 30 in. throat width and can be fitted...
Read More »
New Sanitary Rotary Batch Mixer with Internal Spray Line
Model 700-TH-40-SS available with useable batch capacity of 40 cu.ft. and total capacity of 82 cu.ft. Constructed of stainless steel finished to sanitary standards. Design eliminates the need for an internal shaft with seals contacting material.
Read More »
New De-Clumper Lump Breaker Features Support Base and Infeed Hopper Design
RDC-1530-SS lump breaker is powered by a 5 HP (3.7 kW) motor with self-lubricating chain and sprocket drive. De-lumps bulk materials that are agglomerated or solidified during storage or shipment to their original particle sizes and flowability. #304 or #316 stainless steel constructed units can be finished to food, pharmaceutical or industrial standards.
Read More »Dryer-Dehumidifier-Cooler processes bulk solid materials.
Intended for 3-A and USDA applications as well as applications involving contamination-sensitive materials, Rotary Batch Dryer-Dehumidifier-Cooler features all-stainless contact surfaces, continuous polished welds, and external removable seals. Configurations are available for both direct and indirect drying, dehumidifying, and cooling. Offering usable batch capacity of 20 cu-ft and total...
Read More »
Batch Mixer dries/dehumidifies/cools bulk solid materials.
With all-stainless contact surfaces and suitable for 3-A and USDA applications, Rotary Batch Dryer-Dehumidifier-Cooler uses diagonal, vertical tumbling and spilling motion to optimize particle exposure. This, along with lifters inside drum, minimizes material degradation and promotes process efficiency. Lifters also serve to direct material into discharge spout for 100% evacuation. Ingredients...
Read More »Miniature Rotary Batch Mixer has 5 ft-³/500 lb capacity.
Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...
Read More »
Hammer Mill reduces friable and fibrous materials.
Utilizing centrifugal force, Model 141 reduces materials into uniform particle sizes from 20-300 mesh. Shaft, integral hammer discs, disc pins, and hammers are driven by 75 hp motor at 1,800-4,000 rpm, achieving hammer tip speeds from 8,700-19,500 fpm. Particle size is determined by size of screen perforations. In addition to lower 180Ã-
Read More »
Shredder handles highly abrasive materials.
Maxum 30 employs two 14 in. dia, counter-rotating shafts that operate at 25-35 rpm to grind up to 2 x 2 x 6 ft, 1,600 lb blocks of material into uniform particles from 1/32-1Ã-½ in. as determined by diameter of bed screen perforations. Each of its 2 rotors is configured with staggered array of treated, solid carbide, conical tips that have interference fit into receiver slots for rapid...
Read More »
Rotary Batch Mixers blend heavy, abrasive materials.
Miniature HD Series handles materials with bulk densities up to 80 lb/cu ft. Rotating drum features mixing flights that tumble, turn, and fold material gently while achieving total uniformity in 2-3 minutes, regardless of disparities in bulk densities, particle size, or flow characteristics. Models range in capacity from 0.25-15 cu ft or 2-1,200 lb. They evacuate 100% of batch with no manual...
Read More »
Sanitary Rotary Batch Mixer maintains batch temperatures.
Featuring 20 ftÃ-³ capacity, jacketed Model 700-TH-20-SSJ gently blends batches of ingredients down to 1 ppm with 100% uniformity in less than 3 min while keeping materials heated or cooled. It evacuates 100% of batch and can be sanitized without tools. With material contact surfaces of 304 or 316 stainless steel, 3-A and USDA-compliant unit has rotating drum with external, removable seals...
Read More »
Screen Classifying Cutter controls particle size range.
Model SCC-30 Cutter cuts hard, soft and fibrous materials into controlled particle sizes. Helical rotor with cutter blades attached to array of interconnected parallelograms continuously shears oversize materials against twin, stationary bed knives. Suited for coarse grinding of materials into particles ranging from granules down to 20-30 mesh, cutter has 30 in. throat width and can be fitted...
Read More »